FetHead Germanium - Audio accessory TRITON - Free user manual and instructions
Find the device manual for free FetHead Germanium TRITON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Inline Microphone Preamplifier |
| Model | FetHead Germanium |
| Brand | Triton |
| Dimensions (L x D) | 4.5 x 0.9 inches (114 x 23 mm) |
| Weight | 3.5 oz (100 g) |
| Power Source | 48V Phantom Power (via XLR) |
| Current Draw | 3.5 mA |
| Gain | +28 dB (nominal) |
| Frequency Response | 20 Hz - 20 kHz (+/- 0.5 dB) |
| Input Impedance | 1 kOhm |
| Output Impedance | 600 Ohms |
| Equivalent Input Noise | -128 dBu (A-weighted) |
| Max SPL | 130 dB SPL (0.5% THD) |
| THD+N | < 0.01% at 1 kHz, -10 dBu output |
| Connector Type | XLR 3-pin (male input, female output) |
| Housing Material | Aluminum with Germanium coating |
| Compatible Microphones | Dynamic, Ribbon, and Passive Condenser |
| LED Indicator | Green (power on) |
| Cleaning Instructions | Wipe with a dry, lint-free cloth. Avoid liquids. |
| Safety Precautions | Do not expose to moisture or extreme temperatures. No user-serviceable parts inside. |
| Repairability | Not designed for repair; contact Triton for service. |
| Included Accessories | FetHead Germanium unit only |
| Warranty | 2 years limited warranty |
| Country of Origin | USA |
Frequently Asked Questions - FetHead Germanium TRITON
What is the Triton FetHead Germanium?
It is an inline preamp that boosts microphone signal by +28 dB using phantom power. It is designed for dynamic and ribbon microphones.
How do I power the FetHead Germanium?
It requires 48V phantom power from your audio interface or mixer. No batteries are needed.
Will the FetHead work with my condenser microphone?
The FetHead is primarily for dynamic and ribbon mics. Some passive condensers may work, but active condensers may not get enough phantom power. Check compatibility.
How do I connect the FetHead to my microphone?
Plug the FetHead directly into the microphone's output, then connect your XLR cable to the FetHead's output. The male XLR goes into the mic, female XLR goes to the cable.
Does the FetHead add coloration to the sound?
The Germanium coating adds a slight warmth and harmonic richness often described as 'vintage'.
What is the maximum input level?
The FetHead can handle up to 130 dB SPL with 0.5% THD, making it suitable for loud sources.
Can I use two FetHeads in series?
It is not recommended as it may cause excessive noise and distortion. Use one per microphone.
How do I clean the FetHead?
Wipe the exterior with a dry, soft cloth. Do not use liquids or solvents.
Is the FetHead Germanium repairable?
The unit is sealed and not user-serviceable. If defective, contact Triton customer support.
Does the FetHead work with USB microphones?
No, USB microphones have built-in preamps and do not provide phantom power via XLR. The FetHead requires an XLR connection.
User questions about FetHead Germanium TRITON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio accessory in PDF format for free! Find your manual FetHead Germanium - TRITON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FetHead Germanium by TRITON.
