Powershred C-325Ci - Paper shredder FELLOWES - Free user manual and instructions

Product Type	Paper Shredder
Brand	Fellowes
Model	Powershred C-325Ci
Cut Type	Cross-Cut (5/32 in. x 1-1/2 in. / 4mm x 38mm)
Sheet Capacity (Cross-Cut)	22 sheets per pass
Sheet Capacity (Strip-Cut)	24 sheets per pass
CD/Card Capacity	1 per pass
Entry Width	9.5 in. (240 mm)
Voltage	120V, 60 Hz
Amperage	8 Amps
SafeSense® Technology	Stops shredding immediately when hands touch paper entry
Jam Proof System	Electronically measures paper thickness to prevent jams
Energy Savings System	Optimal efficiency; sleep mode after 2 min inactivity
Shreddable Items	Paper, credit cards, CDs/DVDs, staples, small paper clips, junk mail
Non-Shreddable Items	Adhesive labels, continuous forms, transparencies, newspaper, cardboard, large clips, folders, X-rays, plastic (except CDs)
Waste Bin Capacity	Not specified; recommended daily max 8000 sheets, 300 cards, 30 CDs
Maintenance	Oil after each bin empty (non-aerosol vegetable oil); clean sensors with alcohol
Warranty	2 years parts/service; lifetime cutting blades
Safety Features	SafeSense®, disconnect power switch, auto reverse, door open indicator

Frequently Asked Questions - Powershred C-325Ci FELLOWES

How do I oil my Fellowes Powershred C-325Ci?

Apply non-aerosol vegetable oil (e.g., Fellowes 35250) across the paper entry, then press and hold forward (▶) for 2-3 seconds. Repeat twice. Oil after each bin emptying for peak performance.

What should I do if the shredder stops and the SafeSense® indicator is yellow?

The SafeSense® system stops blades when hands are too close. Remove hands from the paper entry, then press the power button to resume. If active for over 3 seconds, shredder turns off automatically.

How can I clear a paper jam?

Press the Reverse button (◀) to back out the paper. Reduce the sheet count and feed straight. If multiple sheets, remove some. The Jam Proof System may automatically correct misfeeds after 3-6 seconds.

What items should I NOT shred?

Do not shred adhesive labels, continuous form paper, transparencies, newspaper, cardboard, large paper clips, folders, X-rays, greeting cards with sound chips/batteries, or plastic other than CDs/DVDs.

How do I clean the auto-start infrared sensors?

Turn off and unplug the shredder. Locate the two sensors in the center of the paper entry. Dip a cotton swab in rubbing alcohol and wipe away any paper dust buildup.

What does the Door Open indicator mean?

The shredder will not run if the cabinet door is open. Close the door securely to resume operation.

How do I use the sleep mode?

The shredder automatically enters sleep mode after 2 minutes of inactivity. To wake it, touch the control panel or insert paper. This saves energy.

What is the sheet capacity for cross-cut and strip-cut?

Cross-cut (C-325Ci): 22 sheets per pass. Strip-cut (C-325i): 24 sheets per pass. Heavier paper or humidity may reduce capacity.

How do I test the SafeSense® feature?

Turn on the shredder, then touch the test area near the paper entry. The SafeSense® indicator should illuminate. If held for more than 3 seconds, the shredder shuts off. This confirms it works.

What warranty does this shredder have?

Fellowes provides a 2-year warranty on parts and service, and a lifetime warranty on cutting blades from the original purchase date. Covers defects in material/workmanship.

USER MANUAL Powershred C-325Ci FELLOWES

Exterior view of a black Folkewas filter press device (no signage or text visible on body)

Please read these instructions before use.
Do not discard: keep for future reference.

KEY

A. SafeSense® Technology

B. Paper entry

C. CD entry

D. Door

E. Casters

F. Disconnect power switch

10FF

1 2.0N

G. See safety instructions

H. Control Panel and LEDs

1J Reverse

1. ON/OFF

2. Forward

3. Bin full

4. Door open

1. Remove paper

1. SafeSense® indicator (yellow)

2. Auto button

1. Straight feed

CAPABILITIES

Will shred: Paper, credit cards, CD/DVD, staples, small paper clips and junk mail

Will not shred: Adhesive labels, continuous form paper, transparencies, newspaper, cardboard, large paper clips, folders, X-rays or plastic other than noted above

Paper shred size:

Cross-Cut (325Ci) 5/32 in. x 1-1/2 in. (4mm x 38mm)

Strip Cut (325i)....7/32 in. (5.8mm)

Maximum:

Sheets per pass (Cross-Cut) 22*

Sheets per pass (Strip-Cut) 24*

CDs/Cards per pass....1*

Paper entry width....9 1/2 in. (240mm)

* 8.5"x11", 20lb., (75g) paper at 120V, 60 Hz, 8Amps; heavier paper, humidity or other than rated voltage may reduce capacity. Maximum recommended daily usage rates: 8,000 sheets; 300 cards; 30 CDs.

Fellowes SafeSense ^® shredders are designed to be operated in office environments ranging between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.

WARNING: IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!

• Operation, maintenance, and service requirements are covered in the instruction manual. Read the entire instruction manual before operating shredders.
• Keep away from children and pets. Keep hands away from paper entry. Always set to off or unplug when not in use.
• Keep foreign objects — gloves, jewelry, clothing, hair, etc. — away from shredder openings. If object enters top opening, switch to Reverse (◀) to back out object.
• Never use aerosol products, petroleum based lubricants or other flammable products on or near shredder. Do not use canned air on shredder.

• Do not use if damaged or defective. Do not disassemble shredder. Do not place near or over heat source or water.

• This shredder has a Disconnect Power Switch (F) that must be in the ON (I) position to operate shredder. In case of emergency, move switch to OFF (O) position. This action will stop shredder immediately.

• Avoid touching exposed cutting blades under shredder head.
• Use only designated entry for CDs/cards. Keep fingers away from CD entry.
  • Do not put foreign objects in paper entry.
• Shredder must be plugged into a properly grounded wall outlet or socket of the voltage and amperage designated on the label. The grounded outlet or socket must be installed near the equipment and easily accessible. Energy converters, transformers, or extension cords should not be used with this product.
• FIRE HAZARD – Do NOT shred greeting cards with sound chips or batteries.
  • For indoor use only.
  • Unplug shredder before cleaning or servicing.

Plug in and put disconnect power switch in ON (I) position

Press (○) ON to activate

Feed paper/card straight into paper entry and release

Hold CD/card at edge, and feed into center of entry and release

When finished shredding set to OFF (○)

Do nothing and shredder will go automatically to sleep mode after 2 minutes of inactivity

ADVANCED PRODUCT FEATURES

Jam Proof System Eliminates paper jams and powers through tough jobs

Patented SafeSense® Technology Stops shredding immediately when hands touch the paper entry

Energy Savings System Optimal energy efficiency 100% of the time – in use and out of use.

Eliminates paper jams and powers through tough jobs.

graph TD
    A["Advanced Jam Prevention- Electronically measures paper thickness to prevent paper jams:"] --> B["Up to RED: Too many sheets have been inserted."]
    A --> C["Up to YELLOW: Productivity is optimized."]
    A --> D["Up to GREEN: More sheets can be added."]
    B --> E["Remove several sheets until indicator is below red."]
    C --> E
    D --> E
    E --> F["Continue 100% Jam Proof Shredding\n100% JAM PROOF"]
    G["If a misfeed occurs: All indicators light up and shredder pauses for 3-6 seconds"] --> H["Wait for flashing to stop after automatic correction is complete. Regular shredding will resume."]
    I["If illuminates after paper has been reversed, press reverse and remove paper. Otherwise, regular shredding will resume."] --> F

*100% Jam Proof when used in accordance with user manual

SAFESENSE® TECHNOLOGY OPERATION

Stops shredding immediately when hands touch the paper opening.

SET-UP AND TESTING

Turn the shredder ON (○) to activate SafeSense®

Touch test area and look for the SafeSense® indicator to illuminate

SafeSense ^® is active and working properly

If hand is held on SafeSense® area more than 3 seconds shredder will shut off

For more information about all of Fellowes Advanced Product Features go to www.fellowes.com

ENERGY SAVINGS SYSTEM

Optimal energy efficiency 100% of the time – in use and out of use.

• Saves energy in four ways: energy-efficient electronics, jam prevention, standby mode and sleep mode.
  • Sleep Mode shuts down shredder after 2 minutes of inactivity.

WHEN IN SLEEP MODE

In sleep mode

To get out of sleep mode touch control panel

insert paper

PRODUCT MAINTENANCE

CLEANING AUTO-START INFRARED SENSORS

Paper detection sensors are designed for maintenance free operation. However, on rare occasions, the sensors may become blocked by paper dust causing the motor to run even if there is no paper present.

(Note: two paper detection sensors are located in the center of the paper entry).

TO CLEAN THE SENSORS

Turn off and unplug shredder

Locate Auto-start infrared sensor

Dip cotton swab in rubbing alcohol

Using cotton swab, wipe away any contamination from the paper sensors

OILING SHREDDER

All cross-cut shredders require oil for peak performance. If not oiled, a machine may experience diminished sheet capacity, intrusive noise when shredding and could ultimately stop running. To avoid these problems, we recommend you oil your shredder each time you empty your waste bin.

FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE

*Apply oil across entry

Press and hold forward (▷) 2-3 seconds

*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250

TROUBLESHOOTING

Bin Full Indicator: When illuminated, the shredder waste bin is full and needs to be emptied. Use Fellowes waste bag 36056.

SafeSense® Indicator: If hands are too close to the paper entry, the SafeSense® indicator will illuminate and the shredder will stop shredding. If SafeSense® is active for 3 seconds, the shredder will automatically turn off and the user must press the power button on the control panel to resume shredding.

Remove Paper Indicator: When illuminated, press reverse (1) and remove paper. Reduce paper quantity to an acceptable amount and refeed into paper entry.

Door Open Indicator: The shredder will not run if the cabinet door is open. When illuminated, close the door to resume shredding.

Straight Feed Indicator: When illuminated, remove paper and feed straight into paper entry.

Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.

LIMITED PRODUCT WARRANTY

Limited Warranty: Fellowes, Inc. ("Fellowes") warrants the parts of the machine to be free of defects in material and workmanship and provides service and support for 2 years from the date of purchase by the original consumer. Fellowes warrants the cutting blades of the machine to be free from defects in material and workmanship for the lifetime of the shredder. If any part is found to be defective during the warranty period, your sole and exclusive remedy will be repair or replacement, at Fellowes' option and expense, of the defective part. This warranty does not apply in cases of abuse, mishandling, failure to comply with product usage standards, shredder operation using an improper power supply (other than listed on the label), or unauthorized repair. Fellowes reserves the right to charge the consumers for any additional costs incurred by Fellowes to provide parts or services outside of the country where the shredder is initially sold by an authorized reseller. ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for any consequential or incidental damages attributable to this product. This warranty gives you specific legal rights. The duration, terms, and conditions of this warranty are valid worldwide, except where different limitations, restrictions, or conditions may be required by local law. For more details or to obtain service under this warranty, please contact us or your dealer.

Questions or Concerns?

www.fellowes.com	Customer Service & Support
Troubleshooting	Troubleshooting
Registration	Replacement parts
Manuals	General questions

Canada [phone]

Mexico +001-800-514-9057

United States [phone]