FELLOWES

Partition Additions 77032 - Office accessory FELLOWES - Free user manual and instructions

Find the device manual for free Partition Additions 77032 FELLOWES in PDF.

📄 2 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice FELLOWES Partition Additions 77032 - page 1
1 / 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Office Partition / Screen
Model Partition Additions 77032
Brand Fellowes
Dimensions (H x W) 15 x 48 inches (38 x 122 cm)
Weight 5.5 lbs (2.5 kg)
Material Fabric-covered fiberboard with aluminum frame
Color Charcoal Gray
Mounting Type Clamp-on or freestanding base
Compatibility Designed for Fellowes Workstation systems
Purpose Reduces noise, provides visual privacy
Maintenance Wipe with a damp cloth; mild soap if needed
Cleaning Avoid bleach or harsh chemicals
Safety Do not exceed maximum load; secure to prevent tipping
Spare Parts Replacement clamps and bases available
Repairability Modular design; fabric can be replaced
Warranty Limited lifetime warranty

Frequently Asked Questions - Partition Additions 77032 FELLOWES

How do I install the Fellowes Partition Additions 77032?
Installation is straightforward. If using a clamp, attach it to the edge of your desk and tighten. If using a freestanding base, snap the partition onto the upright. Ensure the partition is level and secure before use.
Can this partition be used with any desk?
It is designed for desks with a thickness up to 2 inches (5 cm) for clamp mounting. For freestanding use, it works on any flat surface. Always check weight capacity.
What are the dimensions of the partition?
The partition measures 15 inches high by 48 inches wide (38 cm x 122 cm). This standard size provides adequate privacy for most office cubicles.
How do I clean the fabric surface?
Use a vacuum with a soft brush attachment to remove dust. For stains, wipe with a damp cloth and mild soap. Do not use bleach or abrasive cleaners.
Is this partition compatible with other Fellowes models?
Yes, it is designed to integrate with Fellowes workstation systems, particularly the 7000 series. It can also be used as a standalone accessory.
Can I adjust the height or angle?
The partition is fixed in height but can be tilted slightly if using a clamp with articulation. It cannot be raised or lowered beyond its design.
Does it reduce noise?
The fabric cover and core provide sound-dampening properties, reducing ambient noise by up to 20% in typical office environments.
What spare parts are available?
Replacement clamps, bases, and fabric panels are available. Contact Fellowes customer service or visit their website for part numbers.
How do I mount the partition securely?
Ensure the clamp is tightened enough to prevent movement but not so tight as to damage the desk. For freestanding, make sure the base is fully seated.
Is assembly required?
Minimal assembly is needed. Attach either the clamp or the base to the partition. Tools are included; follow the included instruction sheet.

User questions about Partition Additions 77032 FELLOWES

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Office accessory in PDF format for free! Find your manual Partition Additions 77032 - FELLOWES and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Partition Additions 77032 by FELLOWES.

USER MANUAL Partition Additions 77032 FELLOWES

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : FELLOWES

Model : Partition Additions 77032

Category : Office accessory