CleanView 1332 - Vacuum Cleaner BISSELL - Free user manual and instructions
Find the device manual for free CleanView 1332 BISSELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Upright Vacuum Cleaner |
| Model | CleanView 1332 |
| Brand | Bissell |
| Color | Blue/White (common) |
| Dimensions (LxWxH) | 12.5 x 12.6 x 43 inches |
| Weight | 13.5 lbs |
| Power Supply | 120V, 60Hz, 12 Amps |
| Cord Length | 25 feet |
| Dirt Capacity | 2.8 Liters (bagless) |
| Filtration | Cyclonic with washable foam filter |
| Brush Roll | On/Off switch, multi-surface |
| Attachments Included | Crevice tool, dusting brush, stretch hose |
| Cleaning Path Width | 13.5 inches |
| Suction Control | No (fixed suction) |
| Maintenance | Wash filter every 3 months, replace belt annually |
| Safety Features | Thermal overload protection, loose hair caution |
| Warranty | 1 year limited warranty |
| Manual Languages | English only (original) |
Frequently Asked Questions - CleanView 1332 BISSELL
How do I clean or replace the filter?
Turn off and unplug the vacuum. Remove the dirt tank, take out the foam filter, and rinse it under cold water. Let it dry completely before reinserting. Replace every 6 months or as needed.
What should I do if the brush roll stops spinning?
Check for hair or debris wrapped around the brush roll. Clean it with scissors or a seam ripper. Also ensure the belt is intact; if broken, replace it. Refer to the manual for belt replacement.
How do I empty the dirt tank?
Press the release button on the dirt tank, pull it out, and hold it over a trash can. Press the bottom latch to empty. Rinse the tank with water occasionally, but dry thoroughly before reattaching.
Why does the vacuum lose suction?
Common causes: full dirt tank, clogged filter, or blockage in the hose. Empty the tank, clean or replace the filter, and check the hose for obstructions by detaching it and looking through.
Can I use the vacuum on hardwood floors?
Yes, the CleanView 1332 has a brush roll on/off switch. For hardwood, turn the brush roll off to avoid scratching. Use the bare floor setting if available.
How often should I change the belt?
Replace the belt every 6-12 months or if you notice the brush roll not spinning effectively. A worn belt can cause poor performance.
The vacuum is overheating and shuts off. What now?
This indicates thermal protection activation. Turn off and unplug, then check for blockages. Clean the filter and let the vacuum cool for at least 30 minutes before restarting.
How do I use the attachments?
Detach the hose from the back of the vacuum. Attach the desired tool (crevice, dusting brush, etc.) directly to the hose handle. Use for above-floor cleaning like stairs, upholstery, or corners.
My vacuum makes a loud noise. What's wrong?
Loud noises often come from a jammed brush roll or a foreign object in the motor. Turn off and inspect the brush roll for debris. Also check the dirt tank for large objects.
Where can I buy replacement parts?
Visit Bissell's official website or authorized retailers. Common parts: filters, belts, brush rolls. Use the model number CleanView 1332 to ensure compatibility.
User questions about CleanView 1332 BISSELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual CleanView 1332 - BISSELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CleanView 1332 by BISSELL.