How to remove and clean the filter of the Pet Hair Eraser Turbo 2454F?

Question

Accepted Answer

The Pet Hair Eraser Turbo 2454F has two filters that require regular maintenance:

Pre-motor filter (washable)

Located in the dustbin
To be cleaned every 3 to 6 months depending on usage
Rinse with cold water only (no hot water)
Allow to dry completely in the open air before reinstalling - do not force it into the wet device

Post-motor filter (to be replaced)

To be replaced every 12 to 18 months
This part is not washable

Removal steps

To access the filters: turn off the device, remove the dustbin by pressing the side latches, then release each filter according to its location. Refer to the disassembly diagram in your user manual for the exact markers on your model.

User manual BISSELL Vacuum Cleaner : user manuals and guides in PDF

Models BISSELL Vacuum Cleaner most viewed

Other categories BISSELL

Recent questions about Vacuum Cleaner BISSELL