SFP-36A - Network Equipment ComNet - Free user manual and instructions
Find the device manual for free SFP-36A ComNet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | SFP Transceiver Module |
| Brand | ComNet |
| Model | SFP-36A |
| Form Factor | Small Form-factor Pluggable (SFP) |
| Connector Type | LC Duplex |
| Data Rate | 1.25 Gbps (Gigabit Ethernet) |
| Wavelength | 1310 nm (Multimode) or 1550 nm (Singlemode) - verify |
| Maximum Distance | 550 m (Multimode) or 10 km (Singlemode) - verify |
| Power Consumption | < 1 W (powered by host device) |
| Operating Temperature | 0°C to 70°C (commercial) or -40°C to 85°C (industrial) - verify |
| Dimensions (approx.) | 56.5 x 13.4 x 8.5 mm |
| Weight (approx.) | 20 g |
| Compliance | IEEE 802.3z, SFF-8472, RoHS |
| Digital Diagnostic Monitoring | Supported (DDM/DOM) |
| Hot Pluggable | Yes |
| Maintenance | No user-serviceable parts; clean fiber connectors with lint-free wipes |
| Safety | Class 1 Laser Product (IEC 60825-1) |
| Application | Gigabit Ethernet, Fiber Channel, Telecommunication |
| Warranty | See manufacturer documentation |
Frequently Asked Questions - SFP-36A ComNet
What is the ComNet SFP-36A?
The ComNet SFP-36A is a Gigabit Ethernet SFP transceiver module designed for network equipment such as switches, routers, and media converters.
What is the maximum data rate supported?
The SFP-36A supports a data rate of 1.25 Gbps, suitable for 1000BASE-X Gigabit Ethernet.
What type of fiber connector does it use?
It uses a LC duplex connector for single-mode or multimode fiber cables.
Is the SFP-36A hot-pluggable?
Yes, the SFP-36A is hot-pluggable, allowing installation or removal without powering off the host device.
What is the operating temperature range?
Typical operating temperature is 0°C to 70°C. For industrial variants, it may be -40°C to 85°C. Check the specific label.
Does it support Digital Diagnostic Monitoring (DDM)?
Yes, the SFP-36A supports DDM/DOM (Digital Optical Monitoring) for real-time monitoring of temperature, voltage, and optical power.
What is the maximum transmission distance?
Distance depends on fiber type: 550 m over multimode fiber (e.g., 50/125µm) or up to 10 km over single-mode fiber (e.g., 9/125µm). Verify with vendor.
Is the SFP-36A compatible with other brands?
ComNet SFP modules are generally MSA-compliant and should work with any brand that supports standard SFP interfaces, but compatibility testing is recommended.
How do I clean the optical connectors?
Use a lint-free cleaning wipe or special optic cleaning swab with isopropyl alcohol. Avoid touching the end face.
What should I do if the module is not recognized?
Check that the module is fully inserted, the host device supports the data rate and wavelength, and that DDM thresholds are not exceeded. Try reseating or testing in another port.
User questions about SFP-36A ComNet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network Equipment in PDF format for free! Find your manual SFP-36A - ComNet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SFP-36A by ComNet.