110S-UE - Subwoofer James - Free user manual and instructions
Find the device manual for free 110S-UE James in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | James |
| Model | 110S-UE |
| Woofer Size | 10 inches |
| Amplifier Power (RMS) | 150 W |
| Frequency Response | 20 Hz - 200 Hz |
| Impedance | 4 ohms |
| Cabinet Type | Bass reflex (ported) |
| Connectivity | Wired (speaker level and line level) |
| Controls | Volume, phase switch (0/180°), adjustable crossover |
| Power Supply | AC 110-240V, 50/60 Hz |
| Dimensions (H x W x D) | 14.2 x 13.0 x 15.0 in (36 x 33 x 38 cm) |
| Weight | 25 lbs (11.3 kg) |
| Finish | Black vinyl or matte paint |
| Placement | Floor standing |
| Protection Features | Short circuit, overheat, and overload protection |
| Cleaning | Wipe with a soft, dry cloth. Do not use solvents. |
| Safety | Keep away from moisture and direct sunlight. |
| Spare Parts Availability | Contact James customer support for replacement parts. |
| Repairability | Repairs should be carried out by qualified personnel. |
Frequently Asked Questions - 110S-UE James
How do I connect the James 110S-UE subwoofer to my receiver?
Use a subwoofer cable (RCA) from the receiver's subwoofer output to the line level input on the subwoofer. Alternatively, connect speaker wires from the receiver to the speaker level inputs if your receiver lacks a dedicated sub out.
What is the best placement for the subwoofer?
Place the subwoofer in a corner or along a wall for deeper bass. Experiment with placement to avoid standing waves and ensure a flat frequency response. Keep at least a few inches from walls.
How do I set the phase switch?
Play music with bass and switch between 0° and 180°. Choose the setting that produces the fullest, most articulate bass at your listening position. Adjust while seated in the main listening area.
What crossover frequency should I set?
Set the crossover on the subwoofer to match your main speakers. Start at 80 Hz (THX standard) and adjust up or down depending on your speakers' low-end capabilities. Use the receiver's bass management if available.
Why is my subwoofer making a humming noise?
A ground loop often causes hum. Check all cable connections and try using a ground loop isolator on the RCA cable. Also ensure the subwoofer and receiver are plugged into the same power strip.
What should I do if the subwoofer distorts at high volume?
Distortion at high levels indicates the subwoofer is overdriven. Turn down the volume on the subwoofer or receiver, or reduce the crossover frequency to limit low frequencies. Ensure the subwoofer is not placed in a way that causes port noise.
How do I clean the subwoofer?
Unplug the subwoofer and wipe the exterior with a soft, dry cloth. Do not use any chemical cleaners or water. Vacuum the grille gently if needed.
Can I use the subwoofer with a powered soundbar?
Yes, if the soundbar has a subwoofer output (RCA or wired). If not, some soundbars have wireless subwoofer outputs but the James 110S-UE is wired only. You may need an adapter or a different connection method.
What are the power requirements for the subwoofer?
The subwoofer requires AC 110-240V, 50/60 Hz power. Check the voltage rating on the back panel to match your region. It has a standard IEC power cord.
How do I know if the subwoofer is working?
When powered on, the LED indicator on the front or back should light up (usually green). If not, check the power cord and fuse. You can also test by playing content with low bass frequencies.
User questions about 110S-UE James
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual 110S-UE - James and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 110S-UE by James.