WM - Microphone Lectrosonics - Free user manual and instructions
Find the device manual for free WM Lectrosonics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Microphone System Transmitter |
| Model | WM |
| Brand | Lectrosonics |
| Dimensions (HxWxD) | 3.4 x 2.5 x 0.9 inches (86 x 64 x 23 mm) |
| Weight (with battery) | 5.3 oz (150 g) |
| Power Supply | 2 x AA alkaline batteries |
| Battery Life | Up to 15 hours |
| Frequency Range | UHF 470-614 MHz (varies by region) |
| RF Output Power | 50 mW (selectable low/high) |
| Modulation Type | FM |
| Frequency Stability | ±0.005% |
| Audio Input | TA5M 5-pin mini-XLR (servo bias compatible) |
| Antenna | Removable flexible whip (SMA connector) |
| Operating Temperature | -20°C to +60°C (-4°F to +140°F) |
| Material | Machined aluminum chassis, polycarbonate cover |
| Color | Black or Silver |
| Warranty | 2 years (limited) |
| Included Accessories | Belt clip, antenna, TA5F to TA5F cable |
| Cleaning Instructions | Wipe with dry cloth; do not use solvents |
| Safety Certification | FCC, CE, IC |
Frequently Asked Questions - WM Lectrosonics
How do I turn on the WM transmitter?
Press and hold the Power/Menu button for 2 seconds until the display lights up.
What batteries does the WM use?
It uses two AA alkaline batteries. For longer life, use lithium primary batteries.
How do I adjust the audio gain?
Use the Up/Down buttons to select GAIN in the menu, then adjust between 0 and 44 dB.
Can I use the WM with a lavalier microphone?
Yes, connect a lavalier mic with a TA5F connector to the input jack. The transmitter automatically detects the mic type.
How do I change the frequency?
Go to FREQ in the menu, then use the arrow keys to select a new frequency. Press ENTER to confirm.
What is the range of the WM system?
Typical range is 300 feet (91 meters) line-of-sight, but can vary with environment.
How do I clean the WM transmitter?
Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasives.
What does the 'RF' LED indicate?
The RF LED lights green when transmitting, red when the battery is low, and flashes if there's no audio input.
How do I replace the antenna?
Screw the antenna onto the SMA connector on top of the transmitter. Finger-tighten only.
Why is the audio distorted?
Check the gain setting: if it's too high, reduce it. Also ensure the microphone capsule is not overloading.
User questions about WM Lectrosonics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual WM - Lectrosonics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WM by Lectrosonics.