NTC-140-02 - Router Netcomm - Free user manual and instructions
Find the device manual for free NTC-140-02 Netcomm in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Router |
| Brand | Netcomm |
| Model | NTC-140-02 |
| Dimensions (approx.) | 200 x 150 x 30 mm |
| Weight (approx.) | 300 g |
| Power Supply | 12V DC, 1A |
| Wireless Standard | IEEE 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| LAN Ports | 4 x 10/100 Mbps |
| WAN Port | 1 x 10/100 Mbps |
| Firewall | NAT, SPI, Access Control |
| Security | WPA2-PSK, WPA-PSK, WEP |
| DHCP | Server, Client, Relay |
| QoS | Yes |
| VPN Pass-through | PPTP, L2TP, IPSec |
| Number of Antennas | 2 (internal or external) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% non-condensing |
| Installation | Desktop or wall mount |
| Maintenance & Cleaning | Clean with dry cloth; avoid liquids |
| Safety | Use only provided power adapter; keep away from water |
| Spare Parts & Repairability | No user-serviceable parts; contact Netcomm support |
| Warranty | 1 year limited |
Frequently Asked Questions - NTC-140-02 Netcomm
How do I set up the Netcomm NTC-140-02 router?
Connect the router to your modem via the WAN port, power it on, and access the web interface at 192.168.1.1. Follow the quick setup wizard to configure your internet connection.
What is the default username and password for this router?
The default credentials are admin for both username and password. It is recommended to change these on first login.
How can I reset the NTC-140-02 to factory settings?
Press and hold the Reset button on the back panel for about 10 seconds using a paperclip until the lights flash. The router will reboot with factory defaults.
How do I update the firmware on this router?
Download the latest firmware from the Netcomm support website. Log into the router, go to Administration > Firmware Upgrade, and upload the file. Do not power off during upgrade.
What is the maximum wireless range of the NTC-140-02?
Under typical conditions, the range is up to 100 meters indoors and 300 meters outdoors. Actual range depends on obstacles and interference.
How can I improve the wireless signal strength?
Place the router in a central, elevated location away from walls and electronic devices. Consider adjusting antennas or adding a wireless repeater.
Does the router support WPA3 security?
No, the NTC-140-02 supports up to WPA2. For better security, ensure WPA2 is enabled with AES encryption.
Why is my internet connection dropping frequently?
Check cable connections, ensure the router is not overheating, and try changing the wireless channel. Also, update the firmware and check for ISP issues.
Can I use this router with a VPN service?
Yes, the router supports PPTP, L2TP, and IPSec pass-through. For VPN client support, you may need to flash custom firmware.
What is the default IP address to access the router settings?
The default IP is 192.168.1.1. If you have changed it, reset the router to restore the default.
User questions about NTC-140-02 Netcomm
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual NTC-140-02 - Netcomm and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NTC-140-02 by Netcomm.