FZ160 - Freezer Khind - Free user manual and instructions

Product Type	Chest Freezer
Brand	Khind
Model	FZ160
Net Capacity	160 Liters
Energy Class	F (EU 2019)
Annual Energy Consumption	220 kWh
Climate Class	N/ST (16°C - 38°C)
Temperature Range	-18°C to -24°C
Defrost Type	Manual Defrost
Refrigerant	R600a
Noise Level	41 dB(A)
Power Supply	220-240 V, 50 Hz
Rated Current	0.7 A
Dimensions (H x W x D)	850 x 550 x 560 mm
Net Weight	28 kg
Adjustable Thermostat	Yes (mechanical knob)
Door Features	Reversible door (user installable)
Interior Light	No
Lock	No (not included)
Wheels / Castors	No (leveling feet)
Freezing Capacity	12 kg per 24 hours
Storage Time during Power Failure	Approx. 12 hours
Cleaning	Unplug, defrost, wipe with mild detergent
Spare Parts Availability	Thermostat, door gasket, handles, hinges (contact Khind support)
Repairability Index	7.2 / 10 (estimation)

Frequently Asked Questions - FZ160 Khind

What is the recommended temperature setting for the Khind FZ160 freezer?

The ideal temperature for long-term food storage is -18°C. The thermostat knob allows adjustment from low to high; set it to medium for -18°C.

How often should I defrost my Khind FZ160 freezer?

Defrost when ice buildup reaches 5-10 mm thickness. Depending on humidity and usage, this may be every 6-12 months. Manual defrost is required—unplug and remove food first.

Why is my Khind FZ160 making loud noises?

Normal operation includes sounds like gurgling (refrigerant flow) and clicking (compressor start/stop). If excessive, check that the freezer is level and not touching walls or cabinets.

How do I install or reverse the door on the FZ160?

The door is reversible. Tools required: screwdriver. Instructions: unplug, remove hinge covers, unscrew hinges, move door to opposite side, and reattach hinges. Detailed steps are in the user manual.

What is the energy consumption of the Khind FZ160?

It consumes approximately 220 kWh per year (energy class F). Actual consumption depends on ambient temperature, door openings, and load.

Can I store hot food in the freezer?

No, always allow food to cool to room temperature before freezing. Placing hot food can raise the internal temperature, risking spoilage of other items and overworking the compressor.

How do I clean the Khind FZ160?

Unplug the freezer, remove all food, and defrost. Wipe interior with a solution of warm water and mild detergent. Rinse and dry thoroughly before plugging back in. Do not use abrasive cleaners.

What should I do if the freezer stops cooling?

Check power supply, thermostat setting, and if the compressor is running. If the red alarm light is on (if equipped), contact Khind service. Do not attempt to repair refrigerant circuit yourself.

Is the Khind FZ160 suitable for garage or outdoor use?

It is designed for indoor use with ambient temperatures between 16°C and 38°C. Do not use in unheated garages below 10°C, as freezing conditions may affect performance.

How long does food stay frozen during a power failure?

The freezer can maintain freezing temperature for approximately 12 hours if fully loaded and the door remains closed. Avoid opening during outages.

USER MANUAL FZ160 Khind

Abstract graphic with teal and white geometric shapes resembling a globe and Earth (no text or symbols)

- Chest Freezer / 冷冻柜 / Peti Dingin Beku

Instruction Manual / 说明指示书/Buku Panduan

Please read this manual carefully before operating this product. Keep this manual handy for further reference. 谓在使用此产品前，详读此说明书。并将之收藏以作日后参考。

This manual is also available online

Cara Kerja

Note : Specifications are subject to change without prior notice.

Part Identification

1. Power Indicator Light - Red
2. Compressor Running Indicator Light - Green
3. Thermostat Control Knob
4. Ventilation Panel
5. Handle with Key Lock
6. Basket
7. Freezer Door
8. Castors

General Information

1) The refrigerating system for this freezer is mainly composed of fully-closed refrigerating compressor, an interior evaporator, closely compacted, properly processed with a good cooling result, it is convenient for use, quiet and saves on electricity.
2) The hard Polyaminlester foam (made from spot high-pressured foaming) is used for the thermal insulation which result in good performance and durability.
3) The interior door case is non-poisonous and odourless and formed by easy to clean ABS plastic. It is made of a specially treated embossed aluminium sheet, which result in a generally good clean looking and durable unit.
4) The cabinet and door are made of imported cold-rolled sheets which have been bonderized and
electrostatic-painted, is consistent in thickness, corrosion resistant, flexible and scratch resistant.

Cautions

Safety and warning information

1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
   Children should be supervised to ensure that they do not play with the appliance.
2. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
3. Must use separate, well-earthed and 3 core cable & plug top.
4. Do not squeeze, fold, knot or damage the cord.
5. Keep children away from package and its parts. Danger of suffocation from folding cartons and plastic film.
6. Do not climb, sit, stand or lean on the unit.
7. When repairing or cleaning the appliance, pull out the plug.
8. When pulling out the plug, do not pull cord to avoid cord damage.
9. The appliance should be recycled by appointed institutions. Personal handling may cause danger.
   Please follow according to local regulations regarding the disposal of the appliance for its flammable blowing gas.
10. This appliance is intended for household used only, do not use outdoors.

1. Do not put inside flammable & explosive material (e.g. alcohol, gasoline etc). Risk of explosion and fire!
2. Do not store bottled or canned drinks (especially carbonated drinks) in the freezer compartment. Risk of explosion!
3. Do not touch food or metal container in the freezer compartment with wet hands. Do not put frozen food straight from the freezer compartment into your mouth. Risk of low-temperature burns!

WARNING

1. Do not damage the refrigerant circuit. Refrigerant leakage may ignite or cause eye injuries. Wash the eyes at once and see a doctor.
2. Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. (e.g. heaters, electric ice maker, etc.) Do not use microwave oven, rice cooker and voltage regulator on the top of the appliance.
3. Keep ventilation holes, in the appliance enclosure or in the built-in structure, clear of obstruction.
4. To avoid hazard due to instability of the appliance, it must be fixed in accordance with the instructions.

Reminder Before Use

1) Keep as upright as possible during handling, tilt <45°, never upside down or horizontally and do not roll unit on an uneven surface at high speed.
2) The freezer should be placed in ventilation area avoiding direct sunlight. Heat source and rain. There should be no corrosive gases in surrounding air.
3) Keep stable placing and adjusting the four castors when necessary.
4) All packaging material should be removed. Do not use bottom foam as vibrator proof material.

Installation

The freezer should be placed on the even floor, preferably in a well ventilated room and as far away as possible from any source heat. Any side of the freezer should be at least 4" from the wall so that the warm air from the compressor motor and the mild heat from the cabinet's exterior are all circulate freely.

Diagram 2

Electrical Connection

Connect this appliance to the electricity supply using a 13A three pin plug (single receptacle power source) WARNING - this appliance must be earthed. The wires in this mains lead are colored in accordance with the following code:

Green	-	Earth
Blue	-	Neutral
Brown	-	Live

Ensure that all connections are tight and that there are no loose strands or wire left free or insulations on the leads trapped under the terminal in the plug, also that the cord clamp on the plug grips the outer sheath of the cord.

Thermostat

The inside temperature can be adjusted through the thermostat control knob.

1. The higher means the lower temperature
2. 3 level freezing zone: cold - freezing - deep

Zone	Position
Cold	1 & 2	The refrigeration point & storagetemperature inside cabinet is about 0°C
Freezing	3 & 45	For normal workingQuick frozen
Deep	Deep	Frozen Interval Max < -25°C
OFF	OFF	Forced shutdown point

Alert:

1) The temperature will be affected by:

- Room temperature

- How often the door is opened

• How much food is stored

• Position of the appliance

2) Please remember each time the lid is opened, cold air escapes and the internal temperature rises. Therefore, never leave the lid open and ensure it is closed immediately after food is put in or removed.
3) DO NOT frequently power ON / OFF the freezer.
4) If there is an electricity cut-off, please wait for 5 minutes before operating the appliance again to avoid damage to the compressor.

Operation

1) Before using the freezer it must be cleaned thoroughly with lukewarm or clean water to remove away dust or dirt at the interior surface of the freezer. This is to avoid contamination of food.
2) After cleaning switch on the freezer and set the thermostat control knob at position 3\~4, without putting any food for at least 2-3 hours. This is to ensure that the cold air in the freezer has reached a suitable temperature for freezing food. As a result, frozen food can preserve its freshness and taste for a longer period.
3) After stabilising the temperature, the thermostat control is set to the appropriate setting according to the food load.
1) During start up (i.e. 3-5 hours) DO NOT BE ALARMED by the heat on the external cabinet. This is normal as the condenser is concealed around the internal surface of the cabinet.
2) After installing the appliance, wait for at least 2 hours and max 12 hours BEFORE switching on the appliance. (Alert: During transportation, the oil in the compressor may have flowed into the refrigeration system)

ALERT:

Sambungan Elektrik

Complete defrosting will in course of time become necessary. This should be carried out if the frost built up cannot be scraped away or if it begins to interfere with frozen food storage.

Procedures:

1. Take out the frozen food, turn the freezer off at the main supply and leave the lid open.
2. Scrape away as much frost as possible, thawing of the reminder can be accelerated by placing a bowl of hot water inside the cabinet. As the solid frost loosens, scrape it away with a plastic scraper (not provided) and then wipe over the cabinet and the lid and dry thoroughly.
3. When the cabinet is completely dry and clean, close the lid, switch on main supply. Proceed as for instruction on "OPERATION OF THE FREEZER".

ALERT:

This appliance should not be left unused for a long period. To stop using the appliance, disconnect the main power, clean the interior & dry it completely. Open the door for 2-3 days to ensure it is dry completely.

Storage / Usage

• Do not put large amount of food into the unit at one time.
• Let the compressor run for 2 - 3 hours for the first time.
• Warm food must be cooled down to normal temperature before put into the unit.
• Make sure that there is enough space around food
• Keep the food in same or similar sort area.
• Raw food can be put into the basket provided for freezing at any one time.
• Always cover the frozen food with plastic sheet before putting into the freezer. This prevent difficulty of taking frozen food out later from the freezer.
• Do not keep carbonated, cans drinks / stuffs and bottle inside the freezer.

ALERT:

In case of failure in door opening in the usual manner, due to the internal vacuum effect, use a screw driver or any similar shape but NOT SHARP item to lift up a portion of the gasket to flow air into the unit then try to open the door again.

Cleaning and Maintenance

1. Always ensure that the electrical mains is turned off and unplug before cleaning the appliance.
2. Do not open the door frequently and too long to save energy. Opening the door for prolonged period may cause the freezer unable to perform optimum cooling.
3. Do not use chemical, steel, wooden or abrasive cleaners to clean the appliance.
4. Never use sharp instruments to scrape off frost or ice.
5. After cleaning, wipe the appliance until it is completely dry.
6. Use warm water to clean the oil and stains on the door gasket in order to keeps its elasticity.
7. This product should be service by authorised service agent.
8. Under no circumstances should you attempt to repair the appliance by yourself.
9. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning.

Normal Phenomenon & Troubleshooting

1. If hearing the sound of water flowing in the unit, this is the refrigerant flowing sound inside the pipe.
2. If there is some dew on the surface of the unit, please wipe with dry cloth.
3. The temperature on the compressor surface can reach about 70°C\~90°C during its working time.
4. Should you find that your freezer does not work properly, please check and test as per the following table, before contacting your Service Center.

PROBLEM	POSSIBLE CAUSE
The unit does not operate	- Not plugged in.- The circuit breaker tripped or blown fuse.- The thermostat control knob is set too warm.
The unit is not cold enough	- Ensure the temperature control setting is at proper value.- External environment may require a lower-value setting.- The door is opened too often.- The door is not closed completely.- The door gasket does not be sealed properly.- The unit does not have the correct clearances.
Compressor turns on and off frequently	- The room temperature is hotter than normal.- A large amount of contents has been added in the unit.- The door is opened too often.- The door is not closed completely.- The thermostat control knob is not set correctly.- The door gasket does not be sealed properly.- The unit does not have the correct clearances.
Vibrations	- Check to assure that the unit is levelled.
The unit seems to make too much noise	- The rattling noise may come from the flow of the refrigerant which is normal.- As each cycle ends, you may hear gurgling sounds caused by the flow- of refrigerant in your unit.- Contraction of the inside walls may cause popping and crackling noises.- The refrigeration showcase is not levelled.
The door will not close properly	- The unit is not levelled.- The gasket is dirty.- The shelves are out of position.

Pengenalan Bahagian

Maklumat Umum

Circuit Diagram for FZ360

• A green light and red light are installed on the thermostat control panel.
• The red light is power indicator which is on when power is connected to the freezer.
• The green light is used for the compressor which is on when the compressor is running, or is off when compressor is not running.
• This makes it convenient to determine if there is power or not and if the refrigerating system is working or not.

The following conditions are not considered troubles to the unit:

1) The refrigerating system runs for a long time when the freezer is used for the first time or more articles are put into it.
2) Condensation is normal when ambient humidity is high, drops of water appear on the exterior wall of cabinet.
3) Sound of running water. This is merely the sound of running refrigerants.

Correct Disposal of The Product

This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life. In order to prevent any possible harm to the environment or human health from the uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where purchasing this product from or their local government office for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

规格

一般信息