3LVF-638IT - Dishwasher FAGOR - Free user manual and instructions
Find the device manual for free 3LVF-638IT FAGOR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Brand | Fagor |
| Model | 3LVF-638IT |
| Capacity | 14 Place Settings |
| Energy Efficiency Class | A+ |
| Annual Energy Consumption | 294 kWh |
| Water Consumption per Cycle | 10 L |
| Noise Level | 44 dB(A) |
| Number of Programs | 6 |
| Programs | Eco, Intensive, Normal, Quick, Glass, Pre-wash |
| Delay Start | Up to 24 Hours |
| Dimensions (H x W x D) | 85 x 45 x 60 cm |
| Cut-out Dimensions (H x W x D) | 82-87 x 46-48 x 57 cm |
| Weight | 38 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Water Connection | Cold water only |
| Salt and Rinse Aid Indicator | Yes |
| Self-Cleaning Filter | Yes |
| Flood Protection | AquaStop |
| Electronic Controls | Digital display with buttons |
| Removable Cutlery Basket | Yes |
| Adjustable Upper Rack | Yes |
| Safety Child Lock | Yes |
| Accessories Included | Salt funnel, installation kit |
| Warranty | 2 years |
Frequently Asked Questions - 3LVF-638IT FAGOR
How do I install the dishwasher?
Ensure the cut-out dimensions match (H 82-87 cm, W 46-48 cm, D 57 cm). Connect cold water supply (3/4 inch hose) and drain hose to a siphon. Plug into a grounded outlet (220-240 V). Adjust feet for stability. Level the appliance using a spirit level.
What detergents should I use?
Use only dishwasher detergent (powder, gel, or tablets). For best results, use a rinse aid to improve drying. Always add salt if your water hardness is above 7 dH to prevent limescale.
How do I start a wash cycle?
Load the dishwasher, add detergent, select a program (e.g., Eco for normal soil), close the door, and press the Start button. The display will show remaining time.
Why is my dishwasher not draining?
Check the drain hose for kinks or clogs. Clean the filter under the bottom spray arm. Ensure the sink siphon is not blocked. If issue persists, the drain pump may need service.
How often should I clean the filter?
Clean the filter after every 10-15 cycles. Remove larger particles, rinse under running water, and reinstall. A clogged filter reduces cleaning performance.
What does the salt indicator light mean?
It indicates low salt levels. Refill the salt reservoir (use dishwasher salt) to prevent limescale buildup. After refilling, run a quick rinse program.
Can I use regular dish soap?
No. Regular dish soap creates excessive foam, causing leaks and poor cleaning. Always use dishwasher-specific detergent.
How do I reset the dishwasher?
Press and hold the Start/Reset button for 3 seconds. The display will clear and the appliance will reset. If unresponsive, unplug for 1 minute and plug back in.
What is the maximum load capacity?
The dishwasher holds up to 14 place settings. Load plates facing the spray arms, and ensure items do not block the detergent dispenser.
How do I activate the child lock?
Press and hold the Child Lock button for 3 seconds until the lock symbol appears. Door and buttons are locked. Repeat to deactivate.
User questions about 3LVF-638IT FAGOR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual 3LVF-638IT - FAGOR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 3LVF-638IT by FAGOR.