MLC 104 IP Plus L - Remote control Extron - Free user manual and instructions
Find the device manual for free MLC 104 IP Plus L Extron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Remote Control |
| Brand | Extron |
| Model | MLC 104 IP Plus L |
| Dimensions (H x W x D) | 4.5 x 2.5 x 1.0 inches (114 x 64 x 25 mm) |
| Weight | 5.6 oz (160 g) with batteries |
| Power Source | 2 x AAA batteries (included) |
| Battery Life | Approximately 12 months under normal use |
| Display | 128x64 pixel LCD with backlight |
| Connectivity | IR (infrared), Ethernet (IP control), RS-232 |
| Maximum Range | 30 feet (10 m) line-of-sight IR; IP range limited by network |
| Functions | Control of audio/video sources, lighting, shades, thermostats, and more |
| Mounting | Desktop or wall-mountable (bracket included) |
| Compatible Devices | Extron and third-party AV equipment, IP-enabled devices |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Storage Temperature | -4 to 140°F (-20 to 60°C) |
| Relative Humidity | 10% to 90% non-condensing |
| Color | Black with silver accents |
| Material | High-impact ABS plastic |
| Certifications | CE, FCC, RoHS |
| Warranty | 2 years limited |
| Included Accessories | AAA batteries (2), IR emitter cable, wall mount bracket, user manual |
Frequently Asked Questions - MLC 104 IP Plus L Extron
How do I replace the batteries in the Extron MLC 104 IP Plus L?
Slide the battery cover off the back, remove the old batteries, and insert two new AAA batteries observing correct polarity. Reattach the cover.
Can I control devices using IP instead of IR?
Yes, the MLC 104 IP Plus L supports Ethernet (IP) control. Connect it to your network and configure using the Extron software.
How do I reset the remote control to factory settings?
Press and hold the Reset button on the back using a paperclip for 5 seconds until the display shows 'Factory Reset'.
What is the range of the IR control?
The IR range is up to 30 feet (10 meters) line-of-sight. Obstacles may reduce range.
Can I program the MLC 104 to control custom devices?
Yes, use the Extron Global Configurator software to assign commands for nearly any IR, RS-232, or IP-controlled device.
How do I clean the remote control?
Wipe the surface with a soft, damp cloth. Do not use harsh chemicals or immerse in water.
What does the backlit LCD display show?
The display shows current device status, source selection, volume levels, and configuration menus.
How do I connect the MLC 104 to my network?
Connect an Ethernet cable from your router to the RJ-45 port on the remote. Assign an IP address via the menu or DHCP.
Is the MLC 104 IP Plus L compatible with third-party automation systems?
Yes, it can integrate with control systems via IP, IR, or RS-232. Check Extron compatibility guides for specific systems.
What should I do if the remote is not responding?
First, replace the batteries. If still unresponsive, perform a factory reset. If problem persists, contact Extron support.
User questions about MLC 104 IP Plus L Extron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Remote control in PDF format for free! Find your manual MLC 104 IP Plus L - Extron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MLC 104 IP Plus L by Extron.
