KD-R407EE - Car stereo JVC - Free user manual and instructions
Find the device manual for free KD-R407EE JVC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Stereo |
| Brand | JVC |
| Model | KD-R407EE |
| Dimensions (W x H x D) | 178 x 50 x 160 mm (1-DIN) |
| Weight | 1.2 kg |
| Power Supply | 12V DC (negative ground) |
| Max Power Output | 50 W x 4 (max) |
| RMS Power Output | 22 W x 4 |
| Audio Formats Supported | CD, CD-R/RW, MP3, WMA, WAV |
| Radio Bands | FM (87.5 - 108 MHz), AM (MW/LW) |
| Preset Stations | 18 FM + 12 AM |
| Bluetooth | Yes, version 3.0 with A2DP, HFP, AVRCP |
| USB Port | 1 x USB 2.0 (front, supports up to 32 GB) |
| Auxiliary Input | 1 x 3.5 mm jack (front) |
| Preamp Outputs | 2 x RCA (2V) |
| Display | LCD with white illumination |
| Remote Control | Included (wireless) |
| Maintenance | Clean with a soft dry cloth; avoid solvents |
| Safety | Fuse protection (10A), secure mounting required |
| Spare Parts | Fuse, wiring harness, mounting sleeve |
Frequently Asked Questions - KD-R407EE JVC
How do I pair my phone via Bluetooth to the JVC KD-R407EE?
Press the Bluetooth button (or 'BT' on remote) and set your phone to search for devices. Select 'KD-R407EE' from the list and confirm if a PIN is requested (default 0000). The stereo will display 'PAIRED' on success.
Why is there no sound from the speakers?
Check that the volume is not muted (press MUTE button) and that the fader/balance settings are centered. Verify speaker wire connections and ensure the fuse (10A) is intact. If using Bluetooth, confirm audio streaming is selected as source.
How can I reset the unit?
Press the reset button located behind the faceplate using a pointed object (e.g., ballpoint pen). This restores factory settings. Note that presets will be lost.
Can I play music from a USB flash drive?
Yes, insert a USB drive (FAT32 format, up to 32 GB) into the front USB port. The stereo will read MP3, WMA, or WAV files. Use the source button to select USB.
How do I adjust the display brightness?
Press and hold the DISP (or brightness) button for a few seconds. Use the volume knob to adjust brightness level from 1 (dim) to 7 (bright). Confirm by pressing again.
Does the stereo support steering wheel controls?
Most aftermarket adapters are compatible. Connect a steering wheel control interface (e.g., PAC SWI) to the wired remote input on the rear of the unit. Program the buttons per the interface instructions.
What are the dimensions of the KD-R407EE?
It is a standard 1-DIN size: 178 mm (width) x 50 mm (height) x 160 mm (depth). Ensure your car's dashboard opening accommodates this.
How do I set the clock?
Press and hold the CLOCK button. The hour will flash; turn the volume knob to adjust. Press again to set minutes, then press CLOCK again to confirm.
Can I connect an external amplifier?
Yes, use the RCA preamp outputs (2 pairs, 2V) on the rear. Connect to your amplifier's inputs. Adjust front/rear fader accordingly.
Why does the display show 'ERROR 3'?
This indicates a CD mechanism error. Eject any disc, clean the lens (use a cleaning disc) and reinsert. If persists, reset the unit. If error continues, the laser may need service.
User questions about KD-R407EE JVC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Car stereo in PDF format for free! Find your manual KD-R407EE - JVC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KD-R407EE by JVC.