PB-165 - Tripod Dörr - Free user manual and instructions

Product Type	Portable Tripod
Brand	Dörr
Model	PB-165
Material	Aluminum Alloy
Max Height	165 cm (65 in)
Min Height	45 cm (17.7 in)
Folded Length	55 cm (21.7 in)
Weight	1.2 kg (2.6 lbs)
Max Load	3 kg (6.6 lbs)
Leg Sections	3
Leg Lock Type	Flip Lock
Head Type	Pan-Tilt Head
Quick Release Plate	Yes, with 1/4" screw
Bubble Level	Yes
Center Column	Yes, reversible
Spikes	Retractable rubber feet
Grip	Foam grip on one leg
Power	No power required (manual)
Cleaning	Wipe with dry cloth, avoid solvents
Spare Parts	Replacement feet and plates available
Warranty	2 years

Frequently Asked Questions - PB-165 Dörr

How do I set up the Dörr PB-165 tripod?

Unfold the three legs and lock each section using the flip locks. Extend the center column if needed. Attach your camera via the quick release plate and tighten the screw.

What is the maximum load capacity of the PB-165?

The maximum load is 3 kg (6.6 lbs), suitable for DSLR cameras with standard lenses.

Can I use this tripod for video recording?

Yes, the pan-tilt head allows smooth horizontal and vertical movement, making it suitable for basic video work.

How do I clean the tripod?

Use a soft dry cloth to remove dust. For stubborn dirt, slightly dampen with water. Avoid abrasive cleaners or solvents.

Is the tripod compatible with all cameras?

It is compatible with any device that has a 1/4-inch tripod socket (standard for most cameras and camcorders).

How do I adjust the height of the center column?

Loosen the collar at the top of the legs, slide the column to desired height, and tighten the collar firmly.

What are the folded dimensions of the tripod?

When folded, the tripod measures approximately 55 cm (21.7 inches) in length.

Can I replace the rubber feet with spikes?

The feet are retractable; twist to expose metal spikes for soft ground, or keep rubber for smooth surfaces.

How do I attach the quick release plate?

Screw the plate onto your camera's tripod socket, then slide it into the head until it clicks. Remove by pressing the release button.

What should I do if a leg lock becomes loose?

Tighten the screw on the flip lock with a small screwdriver. If damaged, contact Dörr for replacement parts.

USER MANUAL PB-165 Dörr

Labeled diagram of a tripod with numbered parts for identification

Monopod:

Unscrew leg with foam coating (11)

Unscrew ball head (4)

Attach ball head to separated leg

Aluminum Tripod Pro Black PB-165

Art.-no. 372737

Remove quick-release-plate (1) by turning screw (2) left

Mount your camera to the plate by using the 14 " screw (3)

Attach camera to tripod via quick-release-plate

Adjust angle by moving the ball head (4) (turn screw (5) left to loosen and right to fasten)

Change horizontal direction by loosening screw (6)

Use the opening on ball head (7) for horizontal shots

Push switch (8) down to change angle of the legs

Turn screw (9) right to adjust height of center column

Open brackets (10) to adjust length of the leg. Close brackets to lock

Push all legs up and turn to use the tripod upside down (e.g. useful for macro photography)

Add weight to hook (12) for more stability (e.g. bag)

Fold legs and turn them upside down to carry tripod