BXA1-10000D - Receiver Soundstream - Free user manual and instructions
Find the device manual for free BXA1-10000D Soundstream in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio/Video Receiver |
| Brand | Soundstream |
| Model | BXA1-10000D |
| Number of Channels | 5.1 |
| Power Output per Channel | 100W RMS at 8 ohms (2 channels driven) |
| Total Harmonic Distortion | < 0.05% |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | 100 dB |
| Dimensions (W x H x D) | 17.1 x 6.5 x 15.2 inches |
| Weight | 22.5 lbs |
| Power Consumption | 550W (max), <0.5W standby |
| HDMI Inputs | 4 (HDMI 2.0, HDCP 2.2) |
| HDMI Output | 1 (ARC support) |
| Audio Inputs | Optical, Coaxial, Analog RCA, USB |
| Supported Audio Formats | Dolby Digital, DTS, PCM, MP3, FLAC |
| Tuner | AM/FM with 40 presets |
| Bluetooth | Yes, version 4.2 |
| Remote Control | Included (IR) |
| Speaker Impedance | 4-16 ohms |
| Warranty | 2 years limited |
Frequently Asked Questions - BXA1-10000D Soundstream
How do I connect the Soundstream BXA1-10000D to my TV?
Use an HDMI cable from your TV's HDMI ARC port to the receiver's HDMI ARC output. Alternatively, use optical or coaxial audio output from your TV to the corresponding input on the receiver.
Why is there no sound coming from my speakers?
Check that the receiver is powered on and the correct input is selected. Ensure speaker wires are securely connected to the correct terminals. Also verify that the volume is not muted or set too low.
Can I use Bluetooth to stream music?
Yes, the BXA1-10000D supports Bluetooth. Pair your device by pressing the Bluetooth button on the remote or front panel, then select 'Soundstream BXA1' from your device's Bluetooth list.
How do I set up the AM/FM tuner?
Connect the included AM and FM antennas. Press the 'Tuner' button on the remote to select AM or FM. Use the tuning knob or remote to scan for stations. Press and hold a preset number to save a station.
What speaker impedance is compatible?
The receiver is designed for speakers with an impedance between 4 and 16 ohms. Using speakers outside this range may cause damage or poor performance.
How do I reset the receiver to factory settings?
While the receiver is on, press and hold the 'Setup' button for 5 seconds until 'Clean' appears on the display. Then release. Alternatively, unplug the power cord for 30 seconds.
Can I connect a subwoofer?
Yes, use the subwoofer pre-out (SUB) on the receiver to connect an active subwoofer using a single RCA cable.
Why does the receiver shut off automatically?
This may be due to overheating or a short circuit. Check that ventilation is not blocked and speaker wires are not touching. The receiver may also have an auto-standby feature; you can disable it in the setup menu.
How do I update the firmware?
Firmware updates are done via USB. Download the latest firmware from the Soundstream website to a USB drive, insert it into the USB port on the receiver, and follow the on-screen instructions.
What is the maximum power output of this receiver?
The BXA1-10000D delivers 100W RMS per channel at 8 ohms with 2 channels driven. Dynamic power can reach up to 140W per channel for brief peaks.
User questions about BXA1-10000D Soundstream
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual BXA1-10000D - Soundstream and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BXA1-10000D by Soundstream.