KUS-100 - Uncategorized Sonel - Free user manual and instructions
Find the device manual for free KUS-100 Sonel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ultrasonic Thickness Gauge |
| Brand | Sonel |
| Model | KUS-100 |
| Measurement Range | 1.0 mm - 200.0 mm (steel) |
| Accuracy | ±0.1 mm |
| Material Velocity Range | 1000 - 9999 m/s |
| Probe Frequency | 5 MHz |
| Display | LCD with backlight |
| Power Supply | 2 x AA batteries |
| Battery Life | Approximately 20 hours |
| Dimensions | 150 x 80 x 30 mm |
| Weight | 250 g (including batteries) |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Standards | CE, RoHS |
| Accessories Included | Probe, couplant, manual, case |
| Functions | Thickness measurement, sound velocity calibration, data hold, auto power off |
| Maintenance | Clean probe and coupling surface, store in dry place |
| Safety | Use only approved batteries, do not use in explosive atmospheres |
| General Information | Portable ultrasonic thickness gauge for non-destructive testing of metals, plastics, and ceramics |
Frequently Asked Questions - KUS-100 Sonel
How to calibrate the KUS-100?
Calibration involves using a reference block of known thickness. Apply couplant, place probe on block, adjust velocity until reading matches known thickness.
What batteries does it use?
The KUS-100 uses 2 AA alkaline batteries.
Can it measure through paint?
Yes, but the surface must be clean and couplant applied for accurate readings.
What is the maximum thickness it can measure?
Up to 200 mm in steel, depending on the probe and material properties.
How to change the probe?
Disconnect the probe cable from the device, then connect the new probe securely.
Why is the device not turning on?
Check that the batteries are inserted correctly and have sufficient charge. Replace if necessary.
How to clean the probe?
Wipe the probe with a soft, dry cloth. Avoid using solvents or abrasive materials.
Is the device waterproof?
No, the KUS-100 is not waterproof. Avoid exposure to moisture and liquids.
What does the backlight do?
The backlight illuminates the LCD display for visibility in low-light conditions.
How to update firmware?
The KUS-100 does not have user-upgradable firmware. It comes pre-calibrated from the factory.
User questions about KUS-100 Sonel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual KUS-100 - Sonel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KUS-100 by Sonel.