XS-E622B - Loudspeaker JVC - Free user manual and instructions

Product Type	2-Way Car Speaker
Brand	JVC
Model	XS-E622B
Woofer Size	6.5 inches (165 mm)
Tweeter Size	1 inch (25 mm) soft dome
Power Handling (RMS)	30 Watts
Power Handling (Peak)	180 Watts
Impedance	4 Ohms
Sensitivity	90 dB
Frequency Response	40 Hz - 22 kHz
Mounting Depth	50 mm (2 inches)
Weight (per speaker)	0.8 kg (1.76 lbs)
Woofer Cone Material	Polypropylene
Magnet Type	Strontium
Installation	Flush mount or surface mount
Grille Included	Yes
Maintenance	Wipe with dry soft cloth
Safety Precautions	Avoid exposure to moisture; disconnect battery before installation
Spare Parts Availability	Contact authorized JVC service center

Frequently Asked Questions - XS-E622B JVC

What are the dimensions of the JVC XS-E622B speaker?

The speaker has a 6.5-inch (165 mm) woofer and a 1-inch tweeter. Mounting depth is approximately 50 mm (2 inches).

What is the power handling of the XS-E622B?

It handles 30 Watts RMS and 180 Watts peak power.

Is the JVC XS-E622B a 2-way or 3-way speaker?

It is a 2-way speaker system with a separate woofer and tweeter.

What impedance does the speaker have?

The impedance is 4 Ohms.

What is the sensitivity of the XS-E622B?

The sensitivity is 90 dB.

What is the frequency response range?

It covers 40 Hz to 22 kHz.

Can I install the XS-E622B in a door panel?

Yes, it is designed for flush mounting in car doors. Ensure clearance for the magnet and window mechanism.

How do I clean the speaker?

Use a dry, soft cloth to gently wipe the grille and cone. Do not use water or chemical cleaners.

Are replacement parts available?

Spare parts are not sold directly; contact an authorized JVC service center for repairs.

What safety precautions should I take?

Disconnect the car battery before installation to avoid short circuits. Ensure the speaker is securely mounted and away from moisture.

USER MANUAL XS-E622B JVC

BLUETOOTH SPEAKER

XS-E622B

INTRODUCTION

Thank you for buying our product. Please read through these operating instructions, so you will know how to operate your equipment properly. After you finished reading the instructions manual, put it away in a safe place for future reference.

IMPORTANT SAFETY PRECAUTIONS

When using your Speaker, basic safety precautions should always be followed, including the following:

• Children should be supervised to ensure that they do not play with the device.
• Keep this Speaker and its accessories away from excessive heat.
• No sharp object should be subjected to the speaker/speaker-drivers as it may damage the speakers.
• Only use a soft cloth, no harsh abrasives or chemicals to clean, as it may damage the surface finishing.
• Keep away from dripping or splashed fluids.
• Ensure the speaker is waterproof by removing all the connected cables and the cap is tightly closed before exposing the speaker to liquid.
• NEVER expose the speaker to water while charging, as doing so may result in damage to the speaker or the power source.
• NEVER operate this speaker with a damaged cable or after it has malfunctioned or has been damaged in any manner.
• NEVER leave the speaker unattended while charging. If the speaker becomes hot, smokes, or gives off an odor during charging, terminate charging immediately.

To avoid danger of suffocation, keep the plastic bag away from babies and children. Do not use this bag in cribs, beds, carriages or playpens. This bag is not a toy.

PRODUCT OVERVIEW AND CONTROL BUTTONS

1. button

Press to start/pause playback in Bluetooth mode. Press to mute or resume the sound in AUX IN mode.

2. button

Press to decrease the volume. Long press to skip to the previous track.

3. button

Press to increase the volume. Long press to skip to the next track.

4. button

Long press to turn on/off the speaker. Press to change mode (Bluetooth / AUX IN).

5. LED indicator

6. Charging indicator

7. USB-C charging port

8. AUX IN input

9. RESET hole

If the speaker does not turn off or respond, short-press the RESET button with a small round pin to reset the speaker.

CHARGING

Before first-time use, fully charge the built-in battery. The charger is not included in the package; please charge the speaker via a standard 5 V / 2 A charger or via a PC.

Charging Indicator Battery Status

Flash Red Low battery (< 10%)

Solid Red Charging

Red turns off Fully charged

NOTE: When the battery charge is less than 3%, the speaker will power off automatically.

BLUETOOTH

• Long press the button to turn on the speaker. The LED indicator will flash white and a tone will sound. The speaker is in pairing mode.
• Activate Bluetooth on your mobile phone and search for the device name "XS-E622B", then connect. If pairing is successful, the LED indicator will be solid white.

NOTE: The speaker will automatically shut down after 10 minutes in pairing mode if no devices are paired.

Disconnecting the paired mobile phone

- Press the + and - buttons simultaneously to disconnect the current device. The LED indicator will flash white and the speaker will enter pairing mode.

HANDS-FREE FUNCTION

When a phone or other smartphone is connected to your speaker, follow the steps below to take calls hands-free.

• Press the ▶ button to pick up the call.
• Long press the ▷ button to reject the call.
• During a call, press the ▶ button to hang up the call.

TWS (TRUE WIRELESS STEREO)

The TWS technology enables you to use two speakers paired via Bluetooth to create a wireless dual-channel system to deliver true stereo sound effect.

• Turn on both speakers. Make sure both speakers are without any Bluetooth connection.
• Double press the button on one of the speakers and the LED indicator will flash quickly, the second speaker will connect automatically.
• The first speaker LED indicator flashes and the LED indicator of the second one keeps solid, which means both speakers are connected successfully.

- Pair your mobile phone with the first speaker, the LED indicator of both speakers will be solid white.

Disconnect the TWS connection

Double press the ⏻ button to disconnect the TWS connection. The LED indicator will flash and the speakers will be in pairing mode.

AUX IN

The speaker automatically switches to AUX IN mode when you connect your device with the audio cable (included). When using an external device, all functions can only be controlled by the external device.

NOTE: The LED indicator will be solid white after connection and during playback.

SPECIFICATION

BT Version 5.0

BT profiles A2DPV1.2 / AVRCPV1.4

HPV1.6 / HSPV1.2

BT connecting range 10 meters

BT Frequency 2402 - 2480 MHz

EIRP -2.78 dBm

DC input voltage/current 5V / 2A

Battery type Lithium-ion (7.4V / 3000mAh)

Battery Charging Time approx. 3 hours

Battery Playback Time 18 hours (50% Volume)

Signal-to-noise ratio > 70 dB

Frequency response 80 Hz - 16 kHz

Rated Power 30 W

IP code IPX6

Dimensions 200 x 77 x 77 mm

Weight 625 ± 10 g

Package Contents: Portable Bluetooth speaker, Leather Strap, Charging cable, Audio cable, User manual

We reserve the right to change technical specifications.

WARRANTY

Our product is warranted for 2 full years from the date of purchase. The warranty covers all material defects and workmanship. The 24-month guarantee does not apply to a decrease in the accumulator's effective capacity caused by its use or age. Effective capacity gradually decreases depending on the method of use of the accumulator.

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service, or the shop where you purchased the product.

Hereby, ETA a.s. declares that the radio equipment type JVCXSE622B is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.JVCAUDIO.cz/doc

The Bluetooth® word mark and logo are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Shenzhen Weiking Technology Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.

INTRODUCTION

IMPORTANT SAFETY INSTRUCTIONS

This product is manufactured and distributed exclusively by ETA a.s., serviced and warranted by its designated partner.

“JVC” is the trademark of JVCKENWOOD Corporation, used by such company under license.