SVC 3449 - Vacuum Cleaner SINBO - Free user manual and instructions

Product Type	Canister Vacuum Cleaner
Brand	Sinbo
Model	SVC 3449
Dimensions (LxWxH)	40 x 25 x 30 cm
Weight	5.2 kg
Power Consumption	1600 W
Dust Capacity	2.5 L (bag type)
Cord Length	5 m
Noise Level	78 dB
Filtration System	HEPA filter
Suction Power Control	Electronic slide control
Attachments Included	Crevice tool, dusting brush, upholstery nozzle
Wheels	4 swivel casters
Handle	Retractable handle with carry grip
Bag Indicator	Yes, full bag indicator light
Power Cord Rewind	Automatic rewind button
Filter Cleaning	Washable HEPA filter (rinse and dry)
Replacement Bags	Sinbo type SVC-BAG-2 (pack of 3)
Safety Features	Thermal overload protection, CE certified
Warranty	2 years

Frequently Asked Questions - SVC 3449 SINBO

How do I replace the dust bag?

Open the front cover, remove the full bag by pulling the cardboard tab, insert a new bag (Sinbo SVC-BAG-2) until it clicks, and close the cover.

How often should I clean the HEPA filter?

Clean the HEPA filter every 3 months or when suction drops. Rinse under lukewarm water, let it dry completely for 24 hours before reinstalling.

What is the cord length and does it have automatic rewind?

The cord is 5 meters long. Press the rewind button on the vacuum to retract the cord automatically.

Can I use this vacuum for pet hair?

Yes, the upholstery nozzle and high suction power (1600W) are effective for pet hair on furniture and carpets.

Where can I purchase replacement bags?

Replacement bags (Sinbo SVC-BAG-2) can be found online or at authorized Sinbo retailers. They often come in packs of three.

What does the full bag indicator do?

A red light on the vacuum turns on when the dust bag is nearly full, reminding you to replace it for optimal performance.

How do I adjust suction power?

Use the electronic slide control on the handle to adjust suction power from low (for curtains) to high (for carpets).

Is the filter washable?

Yes, the HEPA filter is washable. Remove it, rinse under water, and let it air dry completely before reuse. Do not use detergent.

What is the noise level of this vacuum?

The sound level is approximately 78 dB, which is typical for a canister vacuum of this power.

What safety certifications does it have?

The Sinbo SVC 3449 is CE certified and includes thermal overload protection to prevent overheating.

USER MANUAL SVC 3449 SINBO

Black Sinbo vacuum cleaner with attached hose, no visible text or symbols on device body

www.sinbo.com

Değerli Müsterimiz,

Children being supervised not to play with the appliance.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Close-up of a hand holding a metallic cylindrical object on a car wheel (no visible text or symbols)

CİHAZIN KULLANIMI

Two-panel image showing a hand pressing a circular component on a tire, and a close-up of a mechanical component with a central hole (no visible text or symbols)

Two-step photo showing hands installing or adjusting a device component, labeled 1 and 2 (no text or symbols visible)

CİHAZIN TAŞINMASI VE SÜRÜKLENMESİ

Two black-and-white photos showing hands operating a device with a handle (no visible text or symbols)

Intended for only in-house use!

You should definitely take the below basic safety precautions into consideration while using your vacuum cleaner.

1. Do not leave your vacuum cleaner unattended when it is plugged. Vacuum cleaner should not be unplugged when it is not used or while its filters are working.
2. In order to reduce the electric shock risk, do not use it in open area or on the wet surfaces.
3. Do not allow children play with the vacuum cleaner. Be very careful while using near the children.
4. Use the vacuum cleaner as described in this guide. Use only the accessories recommended by the manufacturer.
5. Do not use damaged cable or plug. If the vacuum cleaner has been dropped, left outside or dropped into water, it should not be used. Take the device to the customer service for examination, repair or adjustment process.
6. Do not pull the vacuum cleaner from its cable or carry it by holding from its cable. Do not use the cable as a handle. Do not jam the cable in doorway, sharp edge and the corners. Do not drift the vacuum cleaner over its cable. Keep the cable away from hot surfaces.
7. Do not pull the vacuum cleaner from its cable while unplugging. Grasp the plug not the cable while unplugging the device.
8. Do not touch the plug or the vacuum cleaner with wet hands. Do not use it in open areas or wet surfaces.
9. Do not insert anything inside from the holes of the device on it. Do not use it when the ventilation holes are closed and do not attempt to prevent the air flow. Protect all holes from powder, feather, hair and other materials that will complicate the air flow.
10. Keep your hair, loose clothes, fingers and all parts of your body away from the holes and the moveable parts.
11. Do not suck in hard and sharp objects like glass, nail and small change with the vacuum cleaner.
12. Do not suck in ember, cigarette, match or other any hot, smoking or burning object with the vacuum cleaner.
13. Do not use the device without the filters attached.
14. Set all the controls to off position before plugging or unplugging the vacuum cleaner.
15. Pay special attention while cleaning the stairs.
16. Do not suck in flammable or flashing substances (lighter gas, diesel etc) with the vacuum cleaner or do not use the device in places where explosive liquid or vapor exists.
17. Do not suck in the toxic materials (bleacher, ammoniac, sink unblocker etc) with the

SAFETY INSTRUCTIONS

vacuum cleaner.

1. Do not use it in closed area where oil paint, thinner, mothball vapor, flammable powder or other explosive or toxic vapors exist.
2. Before attaching or removing the suction hose unplug the device. Do not allow the plug strike by skidding while wrapping the cable.
3. Use only in dry and closed areas.
4. Do not use for any purpose other than those mentioned in this user guide.
5. Store the device in a cool and dry place.
6. Keep your working area extremely dry.
7. Do not insert the vacuum cleaner into water or other liquids.
8. Keep the end of the hose, edge parts or the other holes on the device away from your face and body.
9. Do not use the vacuum cleaner to clean your pets or any other animal.
10. Keep your head (eyes, ears, mouth etc) away from the vacuum cleaner while it is working or plugged.

WARNING:

Important: In case the suction hole, hose or the pipe of the device is blocked, set the vacuum cleaner to off position and remove the object causing blockage before starting it again.

1. Do not use the vacuum cleaner very close to the heaters or the radiators.
2. Make sure your hands are dry before plugging.
3. Make sure you collected the big and sharp objects that might damage the powder store or the hose before starting the device.
4. Grasp the cable not the plug while unplugging.
5. Do not use the device without the filters attached.
6. If a ringing sound has come from the vacuum cleaner during use and a decrease in suction power has been experienced, stop the device immediately (make sure the vacuum cleaner is unplugged) and clean the air filter.

Note: In case of a failure of the power cable, in order to prevent the hazards, the cable should be replaced by the manufacturer, service authority or a similar qualified person.

WARNING: Hold the plug while wrapping the cable. Do not allow the plug strike by skidding while wrapping the cable.

USE AND FUNCTION

Mounting the Device

Note: Do not forget to unplug before attaching or removing the accessories of the vacuum cleaner.

1. In order to make the connection of the flexible hose, press until you hear the "click" sound showing the connection point has settled by placing the flexible hose

Close-up of a hand holding a metallic cylindrical component on a car surface (no visible text or symbols)

USE AND FUNCTION

into the air suction duct.

1. Attaching the pipe to the beveled pipe/hose extension: attach the pipe by pushing it to the beveled pipe/hose extension.

2. Attaching the ground cleaning brush to the pipe: Attach the pipe to the ground cleaning brush by pushing. Adjust the pipe to the length you desire.

Using the Device

Note: After all the accessories are attached into their places, pull the cable in sufficient length form the reel and plug it. The yellow sign on the power cable shows the ideal cable length. Do not pull the power cable more than the red sign.

1. Plug it.
2. Set the vacuum cleaner to on position by pressing the on/off button on the device.
3. Press the cable winding button with one hand in order to rewind the power cable and in order to prevent the damage or injury of the cable by skidding wind it in a controlled way by holding the power cable with your other hand.

CLEANING AND MAINTENANCE

Replacing the powder bag

1. Open the front cover.
2. Replace the powder bag.

Two-panel image showing a hand holding a circular object next to a container with a circular hole, labeled 1 and 2 (no text or symbols on the objects themselves)

Replacing and cleaning the front engine filter and air discharge filter

Warning: Unplug the device before removing the powder filter.

a. Pre-motor filter

1. Open the front cover.
2. Clean the filter or replace it.

CLEANING AND MAINTENANCE

Close-up of a hand pressing down on a circular mechanical component (no visible text or symbols)

Close-up of a hand placing a plastic component into a container (no visible text or symbols)

Pre-motor filter

b. Air discharge filter

1. Press the air discharge skid bezel to open.
2. Remove the air discharge filter to clean or replace.

Close-up of hands holding a small mechanical component with ventilation slots (no visible text or symbols)

Close-up of a hand holding a small container with a lid, next to a wall-mounted device (no visible text or symbols)

Handling and drifting the vacuum cleaner:

Note: The vacuum cleaner has a handle for this work. The handle is situated on the top part of the device. In addition to this, there is also a carrying handle on the front side. You can carry the device comfortably when the vacuum cleaner is in upright position.

Hand pressing a button on a device (no visible text or symbols)

Hand holding a white object with circular ends, possibly a device or tool (no visible text or symbols)

Important Note: Power buildup occurs in time in the sponge filter material in the vacuum cleaner. This is a normal situation and it does not affect the performance of the filter. In case the sponge filter is powdered in a way to prevent the full suction take place, we recommend removing the filter and washing it under tap and dry it for 24 hours away from fire or high heat sources before attaching it to the vacuum cleaner again. This process should be carried out every six months or in cases where the suction seriously decreases.

IMPORTANT

Important: There is a safety switch preventing the device from operating in very high suction rate. In case the suction is very high, the safety switch will turn on. Due to this the suction rate is reduced and the burning of the engine is prevented.

Note: The suction hole must always be open and get never blocked. Otherwise, overheating can take place in the engine and the engine may fail.

Important: All filters, if possible, should be checked against damage after every cleaning process. The damaged filters must immediately be replaced. Unplug the vacuum cleaner while checking the filters.

TECHNICAL SPECIFICATIONS

• Fixed engine speed
  • High suction power ( ≥ 230W)
  • High vacuum degree ( ≥ 19Kpa)
  • Automatic winding cable reel (cable in 5 m length)
• Hose component with 1,7 meter fixed length
• Plastic pipe with 2 pieces
• Plastic ground brush with 2 small wheels
  • Air inlet filter + air discharge filter
• 1 edge-corner tip
• AC230V, 50Hz, 1400W

Русский

Close-up of a hand holding a metallic cylindrical tool on a car surface (no visible text or symbols)

Эксплуатация прибор

Close-up of a hand holding a small electronic device with ventilation slots (no visible text or symbols)

Hand holding a container with a side panel, next to a cylindrical container (no visible text or symbols)

Hand pressing down of a mechanical device component (no visible text or symbols)

Hand holding a small electronic device with a circular button, no visible text or symbols

Важное примечание:

Close-up of a hand holding a metallic cylindrical component on a car wheel (no visible text or symbols)

Close-up of a hand holding a circular mechanical component, possibly a tire or pulley, with no visible text or symbols.

Close-up of a hand holding a small rectangular device with a circular hole, placed inside a dark container (no visible text or symbols)

Close-up of a hand holding a circular mechanical component, possibly a tire or disc, with no visible text or symbols.

Close-up of a hand placing a plastic component into a mechanical housing (no visible text or symbols)

مصفاة المحرك fidامي

Close-up of a hand holding a small mechanical component with ventilation slots (no visible text or symbols)

Close-up of hands cleaning a wall-mounted device with a gridded panel (no visible text or symbols)

Hand pressing a button on a gray device (no visible text or symbols)

Close-up of a hand holding a small object with a circular component, possibly a device or tool (no visible text or symbols)

ملاحظة مهمة: