Blackview Crown - Smartphone iGET - Free user manual and instructions

Product Type	Smartphone
Brand	iGET
Model	Blackview Crown
Display Size	6.1 inches
Resolution	1560 x 720 pixels
Processor	Quad-core 1.3 GHz
RAM	2 GB
Internal Storage	16 GB
Expandable Storage	microSD up to 32 GB
Rear Camera	8 MP with flash
Front Camera	5 MP
Battery Capacity	4000 mAh
Operating System	Android 8.1 (Go edition)
Dimensions (H x W x D)	156.2 x 73.6 x 9.7 mm
Weight	168 g
Power Supply	Micro USB, 5V/1A charger
Connectivity	4G LTE, Wi-Fi 802.11 b/g/n, Bluetooth 4.2
Sensors	Accelerometer, proximity, light
Maintenance and Cleaning	Wipe with dry cloth; avoid liquids
Safety	Do not expose to water or extreme temperatures
Spare Parts and Repairability	Battery and screen replaceable by qualified technician
General Information	Dual SIM (Nano-SIM), FM radio

Frequently Asked Questions - Blackview Crown iGET

How do I insert the SIM card?

Locate the SIM tray on the side of the phone. Use the provided ejector tool to pop out the tray. Place the Nano-SIM cards in the slots and push the tray back in.

Can I expand the storage?

Yes, the device supports a microSD card up to 32 GB. Insert it into the shared SIM/microSD tray.

How do I take a screenshot?

Press and hold the Power button and Volume Down button simultaneously until you hear a shutter sound.

Why is my battery draining quickly?

Check for apps running in the background, reduce screen brightness, disable Wi-Fi or Bluetooth when not in use, or enable Battery Saver mode in Settings.

How to factory reset the phone?

Go to Settings > System > Reset > Factory data reset. Confirm with your PIN if required. Note: This erases all data.

What should I do if the phone gets wet?

Immediately turn it off, remove the battery if possible, and place the phone in a bag of uncooked rice for 24 hours. Do not use a hairdryer.

How to update the software?

Go to Settings > System > System update. The phone will check for updates. Follow on-screen instructions to install.

Can I use two WhatsApp accounts on this phone?

The phone runs Android Go, which may support app cloning. Check Settings > Dual apps or install a third-party app.

How to clean the charging port?

Use a soft, dry toothpick or a can of compressed air to gently remove dust. Avoid metal objects to prevent damage.

The phone does not turn on. What to do?

First, charge it for at least 30 minutes. Then press and hold the Power button for 10 seconds. If still off, try a Force restart by holding Power and Volume Up together.

USER MANUAL Blackview Crown iGET

Symbol of a trash bin crossed with two diagonal lines, no text or numbers present

Symbol of a trash bin crossed with two diagonal lines, no text or numbers present

Symbol of a trash bin crossed with two diagonal lines, no text or numbers present

Symbol of a trash bin crossed with two diagonal lines, no text or numbers present

DE

• Individual parameters, description by figures and design in the manual may differ depending on the version and updates.
• Printing errors reserved.
• Update your device as soon as a new version of software is available.

For the proper making of any complaint we advice to ask your dealer for filing up and confirming this warranty card including the statement of serial number of the product purchased, which must match the serial number, referred to as the proof of purchase and delivery note, as well as the purchased product. The warranty card is on the last pages of this manual.

Installing the SIM/micro card and battery

Switch your phone off before installing the card and the battery.

1. Remove the back cover.
2. Set up the SIM card as shown on the phone and slide it slightly into the slots of the SIM cards.
3. Insert the memory card into the slot as shown on your device.
4. Insert the battery with the contacts facing the contacts on the phone. Slide gently the battery in until it locks.
5. Replace carefully the back cover of the phone, until you hear, it snaps.

Charging the battery

Before putting your phone into service you must recharge its battery.

1. Connect the adapter into the charger. Make sure that the adapter is inserted in the correct position. Do not use the force when connecting a plug.
2. Connect the charger to the wall outlet.
3. If the battery is fully charged, disconnect the phone from the charger.

Switching the phone on / off / sleep mode

Make sure that the phone has a SIM card and the battery is fully charged.

• Press the ON button to switch on the phone.
• Switch off the phone by pressing ON and select OFF. Confirm it by pressing OK.
• Press shortly ON button to switch the phone over to the sleep mode.

Safety Precautions

• Do not use your phone while driving
• Do not use your phone at the petrol stations.
• Hold the phone at least 15 mm from your ear and body.
  •The phone produces a bright or flashing light.

EN

• The small parts of the phone can cause suffocation.
• Do not expose your phone to open fire.
  •The phone can produce a loud sound.
• Avoid exposure to magnetic fields.
• Keep the phone away from medical devices.
• Avoid extreme temperatures.
• On request, turn off your phone in hospitals and other medical facilities.
• Keep the phone dry.
• On request, turn off the phone at airports and on planes.
• Do not dismantle the phone.
• Turn off the phone in the vicinity of explosive materials and chemicals.
• Use the phone only with certified equipment.
• Do not reckon only upon your phone during emergency situations.
• The phone contains a label that detects moisture. In case of moisture inside phone this label becomes red. The manufacturer has the right to reject a warranty with such a damaged phone.

Damages requiring professional repair

If such cases may occur, please, contact the authorized service or your distributor:

• Moisture got into the phone.
• The phone is mechanically damaged.
• The phone is extremely overheated.

1) For household use: The given symbol (crossed-out wheeled bin) on the product or at accompanying documents means that used electrical and electronic products should not disposed of with household waste. To ensure proper disposal of the product, hand it over to a designated collection point, where it will be accepted free of charge. The correct disposal of this product will help to save valuable natural resources and prevent any potential negative impacts on the environment and human health, which could otherwise be caused by inappropriate disposal of wastes. For more details, please, contact your local authorities or the nearest collection point. The improper disposal of this waste can be penalized in accordance with national regulations. Information for users to disposal of electrical and electronic devices (corporate and business use): For proper disposal of electrical and electronic devices, ask for details from your dealer or distributor. Information for users to disposal of electrical and electronic devices in other countries outside EU: The above mentioned symbol (crossed-out wheeled bin) is valid only in the countries of EU. For proper disposal of electrical and electronic

Symbol of a trash bin crossed with two diagonal lines, no text or numbers present

EN

devices, ask for details from your authorities or dealer. All is expressed by the symbol of crossed-out wheeled bin on product, packaging or in printed materials.

2) Set up the claim for warranty repair of device at your dealer. If you have technical questions or problems, contact your dealer. Follow the rules for working with electrical equipment. The user may not dismantle the device or replace any part of this. Opening or removing the covers poses the risk of electric shock. In case of incorrect reassembly and subsequent connection you are also exposed to electric shock...

Declaration of Conformity:

Company Intelek spol. s.r.o. hereby declares that all JK450,JK890 devices are in compliance with essential requirements and other relevant provisions of Directive 2004/108/EC.

Company Intelek spol. s.r.o. hereby declares that all JK900, Crown devices are in compliance with essential requirements and other relevant provisions of Directive 2004/108/EC.

Company Intelek spol. s.r.o. hereby declares that all DM550 devices are in compliance with essential requirements and other relevant provisions of Directive 2004/108/EC.

Company Intelek spol. s.r.o. hereby declares that all V3 devices are in compliance with essential requirements and other relevant provisions of Directive 2004/108/EC.

CE 0700①

EN

The warranty period of the product is 24 months, unless stated otherwise. The Declaration of Conformity can be downloaded from the website - www.myblackview.eu

This device can be used in the following countries:

AT	BE	CY	CZ	DK	EE	FI	FR
MT	NL	PL	PT	SK	SI	ES	SE
DE	GR	HU	IE	IT	LV	LT	LU
GB	IS	LI	NO	CH	BG	RD	TR

Restrictions on WiFi use

France – for indoor application it can use the whole frequency band of 2,400 MHz to 2,483.5 MHz (channels 1 – 13) for indoor application. For outdoor application it is possible to use only 2,400-2,545 MHz (channels 1-6).

Italy – the terms of the use of WIFI network are described in the so-called Code of Electronic Communication.

The maximum EIRP of wireless LAN

Frequency ranges	Indoor use	Outdoor use
2400 - 2446.5 MHz	10 mW	Not allowed
2446.5 - 2483.5 MHz	100 mW	100 mW on private land approved by the Ministry of Defense

Exclusive importer of iGET products to EU:

INTELEK spol. s r.o., Vlárská 22, 627 00 Brno

web: http://www.myblackview.eu

SUPPORT: http://www.iget.eu/helpdesk

Copyright © 2014 Intelek spol. s r.o. All rights reserved.

Symbol of a trash bin crossed with two diagonal lines, no text or numbers present

Symbol of a trash bin crossed with a diagonal line, no text or numbers present

LT

Symbol of a trash bin crossed with two diagonal lines, representing no waste or discharge (no text or numbers present)

Symbol of a trash bin crossed with two diagonal lines, no text or numbers present

EIRP Wireless LAN Maxim

Symbol of a trash bin crossed with two diagonal lines, no text or numbers present

Serial / Batch number: (S/N)

Date of sale:

Warranty

Sale document number:

Seal of the store:

WARANTY CARD

Information for Customers about Warranty Terms and Conditions:

Warranty shall apply to defects of purchased product, found during its warranty period.

When purchasing a particular product, please consider carefully what properties and functions you expect your product to have.

The fact that purchased product shall not satisfy your later requirements shall not give any reason for complaint.

Please, prior to the first use of this product read carefully its operating instructions and follow these instructions consistently.

We recommend you to keep original product packing during the warranty period for possible transport of the product in such a way so as to prevent any product damage during its transport and handling.

For the purpose of due application of any complaint about the product we recommend you to ask Seller to fill-in and confirm this Warranty Card including identification of serial number of purchased product, which shall comply with the serial number specified both in the document proving product purchase and delivery note and purchased product.

In this connection Customer hereby takes into account that unless this Warranty Card specifies serial number of purchased product, i.e., comparison of such serial number identified in the product with the serial number identified in this Warranty Card and document of product purchase/or delivery note shall not allow to confirm that particular product has come from Seller, in case of any doubts about the origin of such particular product Seller shall be entitled to automatically and without any other acts to reject the complaint of such goods.

WARANTY CARD

Warranty shall not apply to:

-product damage suffered by unqualified installation of firmware or its modification;

-product damage by static electricity;

-product use for any other purposes than designed, described in attached operating instructions;

-damage to warranty seal of the producer, attached to the product;

-product damage inconsistent with the operating instructions, technical standards or safety regulations valid in the Czech Republic;

-product damage resulting from normal wear and tear;

-discharged batteries, decrease in battery capacity caused by its wear and tear;

-product defects caused by the use in dusty, polluted or in any other way dissatisfactory environment pursuant to attached operating instructions.

Wear and tear of the product and its components caused by their common use (discharged batteries, decreased capacity of accumulator, wear and tear of mechanical or displaying components, wear and tear of supply cables, headphones etc.) shall be subject neither to defect warranty nor quality warranty in the moment of take-over.

Furthermore, complaints about product parameters, not included in the operating instructions or in any commercial-technical documentation of Seller, related to the product, shall not be subject to quality warranty in the moment of take-over.

Proof of product purchase, or delivery note, shall constitute an integral part of this Warranty Card.