JV5-160S - Printer Mimaki - Free user manual and instructions
Find the device manual for free JV5-160S Mimaki in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Large Format Printer |
| Brand | Mimaki |
| Model | JV5-160S |
| Printing Technology | Eco-Solvent Inkjet |
| Max Print Width | 161.5 cm (63.6 in) |
| Max Print Resolution | 1440 x 1440 dpi |
| Ink Type | Solvent Ink (SS21 series) |
| Ink Colors | 4-8 colors (CMYK + optional Light Cyan, Light Magenta, etc.) |
| Media Compatibility | Roll media, vinyl, banner, mesh, etc. |
| Media Handling | Roll-to-roll, automatic take-up system |
| Dimensions (W x D x H) | Approx. 2860 x 750 x 1390 mm (112.6 x 29.5 x 54.7 in) |
| Weight | Approx. 150 kg (330 lbs) |
| Power Requirements | AC 100-240 V, 50/60 Hz, 1200 W |
| Power Consumption | 1200 W (max) |
| Operating Temperature | 20-30°C (68-86°F) |
| Operating Humidity | 40-60% RH |
| Print Head | Piezoelectric inkjet head |
| RIP Software Compatibility | RasterLink, Onyx, Caldera, etc. |
| Interface | Ethernet (100Base-TX) |
| Maintenance | Automatic cleaning cycle, manual head cleaning, cap station |
| Safety Features | Emergency stop, cover interlock, overheat protection |
| Spare Parts / Reparability | User-replaceable print heads, ink cartridges, dampers, waster bottle |
| General Information | Eco-solvent printer for outdoor signage, banners, vehicle wraps |
Frequently Asked Questions - JV5-160S Mimaki
What type of ink does the Mimaki JV5-160S use?
The Mimaki JV5-160S uses eco-solvent SS21 series ink, available in CMYK plus optional light colors.
What is the maximum print width of the JV5-160S?
The maximum print width is 161.5 cm (63.6 inches), allowing printing on standard roll media up to 64 inches.
Can the JV5-160S print on banner material?
Yes, it is compatible with various media including vinyl, banner, mesh, and polyester fabrics suitable for outdoor use.
What resolution can I expect from this printer?
The printer supports resolutions up to 1440 x 1440 dpi, delivering sharp text and vibrant colors.
How do I perform a nozzle check?
You can perform a nozzle check from the printer's control panel or via the RIP software to ensure all nozzles are firing correctly.
What is the recommended environmental condition for operation?
Operate the printer in a temperature range of 20-30°C (68-86°F) and humidity between 40-60% RH for best results.
Does the JV5-160S have an automatic take-up system?
Yes, it is equipped with an automatic take-up system for rolled media, allowing continuous unattended printing.
What safety features are included?
Safety features include emergency stop button, cover interlock switches, and overheat protection on the print heads.
How often should I clean the print heads?
The printer performs automatic cleaning cycles as needed. Manual cleaning is recommended if nozzle clogs occur, typically every few days or after long idle periods.
Can I use third-party inks with this printer?
Using third-party ink may void the warranty and can cause damage. It is recommended to use genuine Mimaki SS21 ink for optimal performance and reliability.
User questions about JV5-160S Mimaki
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual JV5-160S - Mimaki and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JV5-160S by Mimaki.