14-5371 - Bicycle Biltema - Free user manual and instructions

Product Type	Bicycle
Brand	Biltema
Model	14-5371
Color	Black
Frame Material	Steel
Wheel Size	26 inches
Brake Type	V-brakes
Gear System	21-speed
Recommended Age	Adult
Max Rider Weight	100 kg
Weight	16 kg
Assembly Required	Yes
Tools Included	Allen keys
Seat Adjustment	Quick-release lever
Tire Pressure Range	2.8-4.5 bar / 40-65 psi
Chain Type	Single speed chain
Pedals	Resin platform pedals
Reflectors	Front, rear, wheel
Warranty	2 years

Frequently Asked Questions - 14-5371 Biltema

How do I adjust the brakes on my Biltema 14-5371?

Loosen the brake cable bolt, pull the cable tighter, and retighten. Ensure the brake pads contact the rim evenly. Refer to the manual for specific adjustments.

What is the recommended tire pressure?

The recommended tire pressure is 2.8 to 4.5 bar (40-65 psi). Check the sidewall of your tires for exact specifications.

How do I assemble the bike?

Attach the front wheel, handlebars, seat, and pedals. Use the included Allen keys. Tighten all bolts securely. Refer to the assembly guide in the manual.

How do I lubricate the chain?

Apply bicycle chain lubricant to the chain while pedaling backward. Wipe off excess lubricant. Lubricate every 100 km or after riding in wet conditions.

What tools are needed for basic maintenance?

Basic tools include Allen keys (4, 5, 6 mm), a tire pump, a chain lubricant, and a Phillips screwdriver. The bike comes with some Allen keys.

How do I adjust the seat height?

Loosen the quick-release lever under the seat, raise or lower the seatpost, and tighten the lever until secure. Do not exceed the maximum height mark.

What should I do if the gears skip?

Check the derailleur alignment and cable tension. Turn the barrel adjuster on the shifter to fine-tune. If the issue persists, take the bike to a professional.

How do I fix a flat tire?

Remove the wheel, use tire levers to remove the tire, patch or replace the inner tube, reinstall the tire, and inflate to recommended pressure.

What safety checks should I do before riding?

Check brakes, tire pressure, chain condition, and quick-release levers. Ensure reflectors and lights are clean and functional. Wear a helmet.

Where can I get spare parts?

Spare parts are available at Biltema stores or online. Common parts include inner tubes, brake pads, and cables. Check the manual for part numbers.

USER MANUAL 14-5371 Biltema

Black BILTEMA exercise bike with curved body and side railings (no visible text or symbols)

TRÄNINGSCYKEL

TEKNISKA DATA

DELAR

Technical line drawing of a mechanical assembly with rollers and supports (no text or symbols)

Technical line drawing of a mechanical component with mounting base and support structure (no text or symbols)

Technical line drawing of a mechanical device with attached components (no text or symbols)

Diagram of a mobility device mounted on a curved bridge, with no visible text or symbols

Line drawing of a stationary bike with curved pipes and a mounted device (no text or symbols)

Technical line drawing of a mechanical device with wheels and attached brackets (no text or symbols)

Exterior view of a stationary exercise bike (no visible text or symbols)

Technical line drawing of a device casing with internal components and mounting holes (no text or symbols)

Kontrollpanelens funktioner

DELER

Technical line drawing of a mechanical assembly with rollers and supports (no text or symbols)

Technical line drawing of a mechanical component with mounting bracket and base plate (no text or symbols)

Technical line drawing of a mechanical device with no visible text or symbols

Diagram of a mobility device mounted on a curved bridge, with no visible text or symbols

Plasser kontrollpanelet i holderen på styret.

Koble til kontrollpanelet

Line drawing of a stationary bike with curved pipes and a mounted device (no text or symbols)

Koble til kontrollpanelet ved å koble til kontakten på baksiden av det. Kontakten er plassert på en ledning som kommer ut av rammerøret.

Montere pedalene

Technical line drawing of a robotic device with articulated limbs and wheels (no text or symbols)

Exterior view of a black stationary exercise bike with adjustable arms and legs (no visible text or symbols)

Technical line drawing of an electronic device casing with internal components and mounting holes (no text or symbols)

OSAT

Technical line drawing of a mechanical assembly with rollers and supports (no text or symbols)

Technical line drawing of a mechanical component with mounting base and support structure (no text or symbols)

Technical line drawing of a mechanical linkage system with no visible text or symbols

Diagram of a mobility device mounted on a curved bridge, with no visible text or symbols

Line drawing of a stationary bike with curved pipes and a digital display (no text or symbols)

Technical line drawing of a robotic device with articulated limbs and wheels (no text or symbols)

Exterior view of a black exercise bike with adjustable arms and legs (no visible text or symbols)

Technical line drawing of an electronic device casing with internal components and mounting holes (no text or symbols)

DELE

Technical line drawing of a mechanical assembly with rollers and supports (no text or symbols)

Technical line drawing of a mechanical component with mounting base and support bracket (no text or symbols)

Technical line drawing of a mechanical device with no visible text or symbols

Diagram of a mobility device with three curved pipes and a control panel (no text or symbols)

Anbring betjeningspanelet i holderen på styret.

Line drawing of a stationary bike with curved pipes and a digital display (no text or symbols)

Technical line drawing of a mechanical exercise device with wheels and suspension rings (no text or symbols)

Exterior view of a black exercise bike with adjustable arms and legs (no visible text or symbols)

Technical line drawing of an electronic device casing with internal components and mounting holes (no text or symbols)

Betjeningspanelets funktioner