BD8200 (84-118) - Uncategorized Biltema - Free user manual and instructions
Find the device manual for free BD8200 (84-118) Biltema in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Corded Oscillating Multi-Tool |
| Brand / Model | Biltema / BD8200 (84-118) |
| Power Supply | 230 V AC, 50 Hz |
| Power Consumption | 300 W |
| Oscillation Angle | 3.2° (left and right) |
| Variable Speed Range | 10,000 - 20,000 rpm |
| Tool Dimensions | 32.5 × 7.5 × 8.5 cm |
| Tool Weight | 1.4 kg |
| Power Cord | 2.5 m rubberized cable |
| Included Accessories | 2 sanding pads (60/120 grit), 2 plunge-cut saw blades, 1 segment saw blade, 1 scraper, 1 hex wrench |
| Quick-Change System | Toolless accessory change via lever |
| Dust Extraction | 35 mm dust extraction port for vacuum |
| Soft Grip | Multi-zone ergonomic handle |
| Safety Certification | CE, double insulated (Class II) |
| Overload Protection | Thermal cut-out |
| Maintenance | Clean vents with cloth, brush; add grease to gearbox every 25 hours |
| Spare Parts | Available from Biltema service centres (blades, pads, brushes) |
| Repairability | Modular housing, replaceable motor brushes |
| Warranty | 2 years, when used according to manual |
| Country of Origin | CE designed; manufactured in PRC |
Frequently Asked Questions - BD8200 (84-118) Biltema
How do I change accessories on the BD8200?
Turn the machine off and unplug it. Lift the accessory release lever, insert the new accessory, and release the lever. The spring-loaded clamp secures it. Ensure it snaps into place.
What is the oscillation angle and speed?
The tool oscillates at 3.2° (1.6° each way) to allow precise cutting, sanding, and scraping. Speed is adjustable from 10,000 to 20,000 rpm using the variable-speed dial.
Can I cut metal with this tool?
Yes, but only use the appropriate metal-cutting blade (not included). Set speed to a lower setting and apply light pressure. Use lubricating paste for better performance.
How do I maintain the motor and gearbox?
Clean the air vents after each use. Every 25 hours of operation, open the gearbox lid and add a small amount of lithium grease. Replace carbon brushes when they are worn.
What safety gear should I use?
Always wear safety glasses, a dust mask, and ear protection. Ensure the workpiece is clamped, never hold it by hand.
Is a dust bag or vacuum adapter included?
No dust bag is included, but the built-in 35 mm adapter connects to most standard vacuums. Insert the vacuum hose into the port and clamp it securely.
Why does the tool overheat?
Overheating usually occurs from dirty vents or excessive pressure. Turn off the tool, allow it to cool, and clean the vents. Reduce working load and lower speed if needed.
Can I use this tool for sanding curved surfaces?
Yes, the triangular sanding pad reaches corners and curves for detail work. Use a speed of 12,000-15,000 rpm and hook-and-loop backed sandpaper.
How do I store the tool safely?
Store in a dry place, with the power cable wrapped loosely. Remove accessories and store them in the included case. Keep out of reach of children.
What does the warranty cover?
The 2-year warranty covers manufacturing defects and workmanship. It does not cover wear parts like sandpaper, blades, or brushes. Keep your purchase receipt.
User questions about BD8200 (84-118) Biltema
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual BD8200 (84-118) - Biltema and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BD8200 (84-118) by Biltema.
USER MANUAL BD8200 (84-118) Biltema
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Biltema
Model : BD8200 (84-118)
Category : Uncategorized