Cylinda

Lara SF160SVB - Range hood Cylinda - Free user manual and instructions

Find the device manual for free Lara SF160SVB Cylinda in PDF.

📄 36 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Cylinda Lara SF160SVB - page 3
View the manual : Dansk DA English EN Suomi FI Norsk NO Svenska SV
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Range Hood
Brand Cylinda
Model Lara SF160SVB
Width 60 cm
Depth 50 cm
Height 15 cm (built-in)
Weight 10 kg
Power Supply 220-240 V, 50/60 Hz
Motor Power 200 W
Extraction Rate 600 m³/h
Noise Level (max) 65 dB
Number of Speeds 3
Lighting 2 x 1.5W LED
Grease Filter Aluminum, washable
Carbon Filter Optional, replaceable
Duct Diameter 150 mm
Installation Type Built-in or under cabinet
Control Type Push buttons
Maintenance Clean grease filter monthly; replace carbon filter every 3-6 months
Safety Features Overheat protection, anti-tilt bracket
Spare Parts Availability Available from authorized service centers
Energy Class A+ (estimated)

Frequently Asked Questions - Lara SF160SVB Cylinda

How do I install the Cylinda Lara SF160SVB range hood?
Follow the installation instructions in the user manual. Ensure proper ducting or recirculation setup. The hood should be mounted securely at the recommended height above the cooktop.
How do I clean the grease filter?
Remove the aluminum grease filter and wash it with warm soapy water or in the dishwasher. Allow it to dry completely before reinstalling. Clean every month for optimal performance.
How do I replace the carbon filter?
Remove the grease filter, then slide out the carbon filter. Insert a new one and reassemble. Replace every 3-6 months or when it no longer absorbs odors.
Why is my range hood making noise?
Check if the filters are clean and properly installed. Ensure the ductwork is not blocked or loose. If the noise persists, contact customer service.
Can I use the hood without ducting (recirculation)?
Yes, you need to install a carbon filter. The air will be filtered and recirculated back into the kitchen. Follow the manual for recirculation setup.
What type of light bulbs does the hood use?
It uses LED bulbs (1.5W each). Replacement should be done by a qualified technician to avoid electrical hazards.
Does the hood come with a remote control?
No, the Cylinda Lara SF160SVB is controlled via push buttons on the front panel.
How often should I replace the carbon filter?
Every 3-6 months depending on usage. If you notice odors returning, it's time to replace.
What is the warranty on this range hood?
Typically 2 years from date of purchase. Check your specific retailer or contact Cylinda customer support for details.
How do I operate the hood after power outage?
Simply press the power button again. The hood will resume operation in the previously selected speed if equipped with memory function; otherwise, set speed manually.

User questions about Lara SF160SVB Cylinda

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Range hood in PDF format for free! Find your manual Lara SF160SVB - Cylinda and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Lara SF160SVB by Cylinda.

USER MANUAL Lara SF160SVB Cylinda

natural_image Simple grayscale icon depicting a kitchen setup with oven, refrigerator, and washing machine (no text or symbols)

Lara SF160RFB

Lara SF160SVB

EN 3
NO 7
DA 11
FI 15
SV 19

EN

1. SAFETY INFORMATION

For your own safety and to ensure proper operation of the appliance, please read this manual carefully before installation and operation. Keep these instructions together with the appliance, even if it is sold or transferred to third parties. It is important that users know all the appliance's operating and safety characteristics.

The cables must be connected by a trained technician.

  • The manufacturer shall not be considered responsible for any injury or damage caused by improper installation or use.
  • The minimum safety distance between the hob and the suction hood is 650 mm (some models may be fitted at a lower height; please see the paragraph relating to working dimensions and installation).
  • If the instructions for installation of the gas hob specify a distance greater than the one indicated, this must be taken into account.
  • Check that the mains power supply corresponds to the one indicated on the data plate affixed inside the hood.
  • The cut-out devices must be installed in the fixed system according to wiring system regulations.

  • For Class I appliances, check that the domestic power supply is adequately earthed.

  • Connect the hood to the flue using a pipe with a minimum diameter of 120 mm. The fumes must travel the shortest distance possible.
  • All the air venting regulations must be complied with.
  • Do not connect the ducting hood to flues that also carry combustion fumes (e.g. boilers, chimneys, etc.).
  • If the hood is used in combination with non electric appliances (e.g. gas appliances), a sufficient level of ventilation must be guaranteed in the room to prevent any exhaust backflow. If the kitchen hood is used in combination with appliances that are not electrically powered, the negative pressure in the room must not exceed 0.04 mbar to avoid any risk of the fumes being sucked back into the room by the hood.
  • The air must not be extracted through a flue that is also used as an exhaust flue for fumes from gas or other fuel powered combustion devices.
  • If it is damaged, the power cable must be replaced by the manufacturer or by a service technician.
  • Connect the plug to a socket that complies with current regulations and is in an accessible position.

- As regards the technical and safety measures to be taken for exhausting of fumes, it is important that the regulations set by local authorities be complied with scrupulously.

Cylinda Lara SF160SVB - SAFETY INFORMATION - 1

CAUTION: remove the protective films before installing the hood.

- Only use screws and hardware of a sort suitable for the hood.

Cylinda Lara SF160SVB - SAFETY INFORMATION - 2

CAUTION: failure to install the screws or fixing devices as described in these instructions may mean there is a risk of electric shocks.

- Do not look directly at the light through optical devices (binoculars, magnifying glasses...).

- Do not flambé food under the hood: you might cause a fire.

- This appliance may be used by children over the age of 8 years and by persons with limited psycho-physical and sensory abilities or with insufficient experience and knowledge, provided they are carefully supervised and instructed on how to use the appliance safely and on the dangers that it involves. Make sure that children are not allowed to play with the appliance. Cleaning and maintenance to be performed by the user must not be carried out by children, unless they are under supervision.

- Supervise children, to make sure they do not play with the appliance.

- The appliance must not be used by persons (including children) with limited psycho-physical or sensory capacities or with insufficient experience and knowledge, unless they are carefully supervised and instructed.

Cylinda Lara SF160SVB - SAFETY INFORMATION - 3

Accessible parts may become extremely hot during the use of cooking appliances

- Clean and/or replace the fil- ters after the period of time in- dicated (danger of fire). See the paragraph on Mainten- ance and cleaning.

- The room must be adequately ventilated when the hood is used simultaneously with appliances that use gas or other fuels (not applicable to appliances that only discharge air into the room).

- The symbol ⚡ on the product or on its packaging indicates that the product must not be disposed of with the normal domestic waste. The product must be disposed of at a specialist re-cycling centre for electrical and electronic components. By making sure that this product is disposed of properly, you will help prevent possible negative consequences for the environment and for health that might result from its improper disposal. For more detailed in-

formation on how to re-cycle this product, please contact your local municipal offices, local waste disposal service or the shop in which the product was purchased.

- “In case of replacement with halogen lamp use only self-shielded tungsten halogen lamps or self-shielded metal halide lamps.”

2. USE

  • The suction hood has been designed exclusively for domestic use, to eliminate kitchen odours.
  • Never use the hood for purposes other than those for which it was designed.
  • Never leave high flames under the hood when it is in operation.
  • Adjust the intensity of the flame so that it is directed onto the bottom of the cooking pan, making sure it does not wrap around the sides.
  • Deep-fryers must be kept under constant supervision when in use: the oil may catch fire if it gets too hot.

3. CLEANING AND MAINTENANCE

- The activated carbon filter is neither washable nor regenerable and must be replaced approximately every 4 months of operation or more frequently in case of very intense use (W).

Cylinda Lara SF160SVB - CLEANING AND MAINTENANCE - 1

natural_image Technical diagram of a mechanical device with internal components and directional arrows, no readable text or symbols present.

- The grease filters must be cleaned every 2 months of operation or more frequently in case of very intense use and can be washed in a dishwasher (Z).

Cylinda Lara SF160SVB - CLEANING AND MAINTENANCE - 2

natural_image Illustration of a hand holding a smartphone with a finger pointing at it, inside a circular frame (no text or symbols)
  • Clean the hood using a damp cloth and a neutral liquid detergent.
  • For external and internal cleaning of the hood avoid alcoholic or silicone products.

If the product or one of its parts is made of stainless steel, use specific non-ab-rasive products for cleaning and follow the lines of the satin finish during cleaning.

4. CONTROLS

[X277][X4CK][8007][X2K4]
Key Function
T1Turns the suction motor on and off at the first speed.
T2Turns the motor on at the second speed.
T3Turns the motor on at the third speed.
LTurns the lighting system on and off at maximum intensity.

5. LIGHTING

Cylinda Lara SF160SVB - LIGHTING - 1
Lamp Power (W)Socket Voltage (V)Dimension (mm)ILCOS Code
Cylinda Lara SF160SVB - LIGHTING - 24 E14 220-240107x37 DRBB/F-4-220-240-E14-35/100

NO

1. SIKKERHETSINFORMA SJON

natural_image Technical diagram of a mechanical device with internal components and directional arrows, no readable text or symbols present.
natural_image Illustration of a hand holding a smartphone with a finger, featuring a stylized 'Z' logo (no text or symbols on the device itself)
natural_image Technical diagram of a mechanical device with internal components and directional arrows, no readable text or symbols present.
natural_image Illustration of a hand holding a smartphone with a finger, next to a stylized 'Z' logo (no text or symbols on the device itself)
natural_image Technical diagram of a mechanical device with internal components and directional arrows, no readable text or symbols present.
natural_image Illustration of a hand holding a smartphone with a Z symbol on the screen (no text or symbols present)
natural_image Technical diagram of a mechanical device with internal components and directional arrows, no readable text or symbols present.
natural_image Hand holding a tablet with a finger pointing at it, no text or symbols visible
natural_image Simple line drawing of a wrench and screwdriver (no text or symbols)

EN Warning! Before proceeding with installation, read the safety information in the User Manual.
NO Advarsel! Les sikkerhetsinstruksjonene i bruksveiledningen før apparatet installe-res.
DA Advarsel! Læs sikkerhedsreglerne i brugsanvisningen inden installation.
FI Varoitus! Ennen laitteen asentamista lue käyttöoppaassa olevat turvallisuustiedot.
SV Varning! Läs säkerhetsföreskrifterna i bruksanvisningen innan apparaten installeras.

L = 6x (4,2x44,4) I = 6x O1 = 2x M = 2x P1 = 4x (2,9x9,5) N1 N2

Warning sign with exclamation mark and two gloves, indicating hazardous or hazardous material

! OK!

1x Ø 120 mm Ø 150 mm

1x Ø 150 mm

Diagram showing a shopping cart, a house icon with a currency symbol, and two circular objects labeled 'W' with dashed lines.

Min. 500 mmMin. 650 mm 90°

Diagram illustrating a mechanical or architectural component with directional arrows and a 2° angle标注, accompanied by a house icon.

Cylinda Lara SF160SVB - SIKKERHETSINFORMA SJON - 9

natural_image Diagram of a kitchen chimney with directional arrows indicating airflow or movement (no text or symbols)

Cylinda Lara SF160SVB - SIKKERHETSINFORMA SJON - 10

402 Min. 420 Max. 685

169 167 402 Min. 515 Max. 795

25.5 598 471 200

1
Cylinda Lara SF160SVB - SIKKERHETSINFORMA SJON - 14

Cylinda Lara SF160SVB - SIKKERHETSINFORMA SJON - 15

Diagram showing a hand holding a pen writing on paper, with dimension lines and a grid of circular components below.

2
Cylinda Lara SF160SVB - SIKKERHETSINFORMA SJON - 17

Cylinda Lara SF160SVB - SIKKERHETSINFORMA SJON - 18

2 1-2 N1 4x Ø 8 mm 1 - 4x 2x Ø 8 mm 1 - 2x L - 2x 5 mm OK! 125125 140 Min. 650 mm Min. 500 mm

3 b €

4 5 mm OK! L 2x

Diagram illustrating airflow or heat transfer around a building structure with labeled angles and directional arrows

Diagram illustrating a kitchen ventilation system with directional arrows and a 32-pin package labeled '32'

5 M 2x L 4x

6 Ø150 Ø120 O O1 2x O1 2x O1

7 N1 N1

8 P1 4x N1

9 N1 N2

10 z

Cylinda Lara SF160SVB - SIKKERHETSINFORMA SJON - 30

natural_image Simple line drawing of a chimney with arrows indicating airflow or movement (no text or symbols)

5 M 2x L 4x

6 F F

7 N1

8 P1 4x

9 N1 N2

10 €

11 Z

Diagram illustrating a 3D object being rotated by a tool, with icons for home, car, wrench, and screen.

Diagram illustrating a mechanical assembly process with labeled parts W and z, showing tool path and component layout.

Diagram illustrating a 3D object being processed with tools, showing components like a wrench, wrench head, and tool path.

NO

Service: Nationwide service in

Sweden

Visit: www.cylinca.se

Call 0771-25 25 00

Declare: Model code, Serial number, Purchase date, Problem description, Name and address, Phone number

Contact us:

www.cylinda.se

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Cylinda

Model : Lara SF160SVB

Category : Range hood