WGCT2RJ6NM - Network Socket HAGER - Free user manual and instructions

Product Type	RJ45/RJ11 Data Outlet (Uncategorized)
Brand	Hager
Model	WGCT2RJ6NM
Application	Data transmission in local area networks and telephone/data applications
Installation	Flush-mounted in standard wall boxes (recommended depth ≥ 35 mm), indoor use only
Environmental Protection	Indoor areas with no drip or spray water
RJ45 Voltage Proof (Contact-to-Contact)	1000 V DC or AC peak
RJ45 Current Rating	0.75 A
RJ45 Insulation Resistance	≥ 500 MΩ at 100 V DC
RJ45 Signal Contact Resistance	≤ 20 mΩ
RJ45 Connection Type	IDC terminals
RJ45 Design Standard	IEC 60603-7
RJ45 Color Code	TIA/EIA 568-B.2 (A and B)
RJ45 Cat.5e Bandwidth	Max. 100 MHz
RJ45 Cat.5e Conductor Diameter	0.51 ... 0.64 mm (AWG 24-22), solid
RJ45 Cat.5e Standard	ISO/IEC 11801 (UTP)
RJ45 Cat.6 Bandwidth	Max. 250 MHz
RJ45 Cat.6 Conductor Diameter	0.51 ... 0.64 mm (AWG 24-22), solid
RJ45 Cat.6 Standard	ISO/IEC 11801, 2nd edition (UTP)
RJ45 Cat.6A Bandwidth	Max. 500 MHz
RJ45 Cat.6A Conductor Diameter	0.41 ... 0.64 mm (AWG 26-22), solid
RJ45 Cat.6A Standard	ISO/IEC 11801, edition 2.2 (UTP)
RJ11 Compliance	YD/T 577
Safety Installation	Must be installed by qualified electrician according to local standards

Frequently Asked Questions - WGCT2RJ6NM HAGER

What type of cable is compatible with the Hager WGCT2RJ6NM?

The device accepts solid copper conductors with diameters 0.51–0.64 mm (AWG 24-22) for Cat.5e and Cat.6, and 0.41–0.64 mm (AWG 26-22) for Cat.6A, unshielded twisted pair (UTP).

What is the maximum transmission bandwidth for the WGCT2RJ6NM?

It depends on the module: Cat.5e: 100 MHz, Cat.6: 250 MHz, Cat.6A: 500 MHz.

Can I install the Hager WGCT2RJ6NM outdoors?

No, it is only suitable for indoor use in areas with no drip or spray water.

What is the correct way to strip the cable for RJ45 termination?

Strip 30 mm of the cable jacket to expose the pairs for IDC termination.

Which colour code should I use for RJ45 wiring?

You can use either TIA/EIA 568A or TIA/EIA 568B. The pin assignment table is provided in the manual.

What tools are needed for installation?

You will need a flat-blade screwdriver to remove frames, and a punch-down tool for IDC terminals.

How many jacks does the WGCT2RJ6NM have?

The model WGCT2RJ6NM appears to be a combination of one RJ45 and one RJ11 outlet, as shown in the installation example.

Is the Hager WGCT2RJ6NM shielded?

The modules are unshielded (UTP) according to the standards listed.

Can I use this outlet for telephone connections?

Yes, the device includes an RJ11 module specifically designed for telephone and data applications.

What is the minimum wall box depth required?

A standard wall box with a depth of at least 35 mm is recommended for flush-mounted installation.

USER MANUAL WGCT2RJ6NM HAGER

Electrical equipment must only be installed and assembled by a qualified electrician in accordance with the relevant installation standards, regulations, directives and safety and accident prevention directives of the country.

Failure to comply with these installation instructions may result in damage to the device, fire or other hazards.

Function

The RJ45 outlets are used for data transmission in local area networks. The RJ11 outlets are designed for telephone and data applications. Each jack is equipped with a dust protection slider.

Correct use

• For the flush-mounted installation in standard wall boxes (recommended wall box depth ≥ 35 mm).
• Only suitable for use in indoor areas with no drip and no spray water.

Technical data

RJ45 outlets

Voltage proof (contact-to-contact): 1000 V DC or AC peak

Current rating: 0.75 A

Insulation resistance: ≥ 500 M at 100 V DC

Signal contact resistance: ≤ 20 m

Type of connection: IDC terminals

Design: according to IEC 60603-7

Colour code A and B: according to TIA/EIA 568-B.2

RJ45 Cat.5e modules

Transmission bandwidth: max. 100 MHz

Conductor ∅ (solid): 0.51 ... 0.64 mm (AWG 24-22)

Cat.5e, unshielded (UTP): according to ISO/IEC 11801

RJ45 Cat.6 modules

Transmission bandwidth: max. 250 MHz

Conductor ∅ (solid): 0.51 ... 0.64 mm (AWG 24-22)

Cat.6, unshielded (UTP): according to ISO/IEC 11801, 2nd edition

RJ45 Cat.6A modules

Transmission bandwidth: max. 500 MHz

Conductor ∅ (solid): 0.41 ... 0.64 mm (AWG 26-22)

Cat.6A, unshielded (UTP): according to ISO/IEC 11801, edition 2.2

RJ11 outlet

Compliance: YD/T 577

Information for electricians

Installation and electrical connection

Preparing the device for installation

(for example "RJ11 + RJ45 outlet")

1A

Hager Muse

Hager Inspire1B

• Carefully loosen the frame on the notches with a flat-blade screwdriver. Lift up and remove the frame (1A/1B).
  ■ Hager Inspire: Remove the cover plate also with a flat-blade screwdriver (1B).

Connecting the RJ45 data module

■ Remove the cover plate of the data module with a flat-blade screwdriver.

2A

• Strip 30 mm of cable jacket (2A).
  ■ Position and terminate first pair according to colour code A or B:

RJ45 pin assignment TIA/EIA 568B TIA/EIA 568A

	1 white/orange white/green
	2 orange green
	3 white/green white/orange
	4 blue blue
	5 white/blue white/blue
	6 green orange
	7 white/brown white/brown
	8 brown brown

As with the first pair position and terminate each subsequent pair one at a time until termination is complete.
- Fix the cover plate back to the module.

Connecting the RJ11 telephone module

3A

• Strip 10 mm of cable jacket (3A).
  ■ Position first pair according to colour code:

RJ11 pin assignment

	2 blue/white
	3 white/blue
	4 white/red
	5 red/white

- Fix the cover plate back to the module.

Checking of the installation:

A functional test of the installation should be made for each data or telephone outlet.

Installing the device into the wall box

(for example "RJ11 + RJ45 outlet")

4

Technical diagram of a mechanical assembly with a bracket and tool, showing no text or symbols

■ After wiring, fix the device with the two screws attached into the wall box (4).

Assembling the covers

(for example "RJ11 + RJ45 outlet")

5A

Hager Muse

5B

Hager Inspire

■ Hager Muse: Snap the frame onto the device (5A).
■ Hager Inspire: Place the cover plate in the correct position and fix with frame (5B).

2-5gang frames are available for multiple combinations.