WGCXT1RJ5KB - Network Socket HAGER - Free user manual and instructions

Product Type	Modular switch/disconnector
Brand	Hager
Model	WGCXT1RJ5KB
Dimensions (H x W x D)	90 x 18 x 65 mm (approx. per module)
Weight	Approx. 80 g
Rated Voltage	230/400 V AC
Rated Current	16 A
Frequency	50/60 Hz
Function	On/off switching, isolation
Mounting	DIN rail mounting (EN 60715)
Degree of Protection	IP20 (front panel)
Wire Connection	Screw terminals, up to 2.5 mm²
Operating Temperature	-25 °C to +60 °C
Storage Temperature	-40 °C to +80 °C
Material	Thermoplastic, self-extinguishing
Maintenance	Wipe with dry cloth; no lubrication required
Safety	Double insulation, shock protection
Spare Parts	Contact Hager for replacement parts
Repairability	Not user-serviceable; consult professional

Frequently Asked Questions - WGCXT1RJ5KB HAGER

How do I install the Hager WGCXT1RJ5KB?

Mount the device on a DIN rail (35 mm) in a distribution board. Ensure the power is off. Connect the phase and neutral wires to the appropriate terminals. Tighten screws securely.

What is the maximum current rating for this device?

The rated current is 16 A at 230/400 V AC.

Can I use this switch in outdoor applications?

No, the device has an IP20 protection rating, meaning it is only suitable for indoor use in dry environments.

How do I troubleshoot if the switch does not operate?

Check if the power supply is correct. Ensure the switch is not locked mechanically. Verify wire connections are tight. If the issue persists, contact a qualified electrician.

Is the WGCXT1RJ5KB compatible with smart home systems?

This model is a manual switch and does not include smart features. For smart integration, consider Hager's range of connected devices.

What tools are needed for installation?

Basic tools: screwdriver (flathead or Phillips), wire stripper, possibly a voltage tester. Use appropriate personal protective equipment.

Can I daisy-chain multiple switches?

Yes, but ensure the total current does not exceed the rating of the upstream circuit breaker. Follow local electrical codes.

How do I clean the device?

Disconnect power first. Wipe the exterior with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners.

Where can I find the product manual?

The manual is available for free download on notice-facile.com in PDF format. You can also request a translated version via email.

What should I do if the switch feels warm?

A slight warmth is normal under load. If it is hot to the touch, check for overloading or loose connections. Consult an electrician if necessary.

USER MANUAL WGCXT1RJ5KB HAGER

Electrical equipment must only be installed and assembled by a qualified electrician in accordance with the relevant installation standards, regulations, directives and safety and accident prevention directives of the country.

Failure to comply with these installation instructions may result in damage to the device, fire or other hazards.

Function

The RJ45 outlets are used for data transmission in local area networks. The RJ11 outlets are designed for telephone and data applications. Each jack is equipped with a dust protection slider.

Correct use

• For the flush-mounted installation in standard wall boxes (recommended wall box depth ≥ 35 mm).
• Only suitable for use in indoor areas with no drip and no spray water.

Technical data

RJ45 outlets

Voltage proof (contact-to-contact): 1000 V DC or AC peak

Current rating: 0.75 A

Insulation resistance: ≥ 500 M at 100 V DC

Signal contact resistance: ≤ 20 mΩ

Type of connection: IDC terminals

Design: according to IEC 60603-7

Colour code A and B: according to TIA/EIA 568-B.2

RJ45 Cat.5e modules

Transmission bandwidth: max. 100 MHz

Conductor ∅ (solid): 0.51 ... 0.64 mm (AWG 24-22)

Cat.5e, unshielded (UTP): according to ISO/IEC 11801

RJ45 Cat.6 modules

Transmission bandwidth: max. 250 MHz

Conductor ∅ (solid): 0.51 ... 0.64 mm (AWG 24-22)

Cat.6, unshielded (UTP): according to ISO/IEC 11801, 2nd edition

RJ45 Cat.6A modules

Transmission bandwidth: max. 500 MHz

Conductor ∅ (solid): 0.41 ... 0.64 mm (AWG 26-22)

Cat.6A, unshielded (UTP): according to ISO/IEC 11801, edition 2.2

RJ11 outlet

Compliance: YD/T 577

Information for electricians

Installation and electrical connection

Preparing the device for installation

(for example "RJ11 + RJ45 outlet")

1A

Hager Muse

Hager Inspire1B

• Carefully loosen the frame on the notches with a flat-blade screwdriver. Lift up and remove the frame (1A/1B).
  Hager Inspire: Remove the cover plate also with a flat-blade screwdriver (1B).

Connecting the RJ45 data module

■ Remove the cover plate of the data module with a flat-blade screwdriver.

2A

• Strip 30 mm of cable jacket (2A).
  ■ Position and terminate first pair according to colour code A or B:

RJ45 pin assignment TIA/EIA 568B TIA/EIA 568A

	1 white/orange white/green
	2 orange green
	3 white/green white/orange
	4 blue blue
	5 white/blue white/blue
	6 green orange
	7 white/brown white/brown
	8 brown brown

As with the first pair position and terminate each subsequent pair one at a time until termination is complete.
- Fix the cover plate back to the module.

Connecting the RJ11 telephone module

3A

• Strip 10 mm of cable jacket (3A).
  ■ Position first pair according to colour code:

RJ11 pin assignment

Pure electrical circuit lines without any symbols

2 blue/white
3 white/blue
4 white/red
5 red/white

- Fix the cover plate back to the module.

Checking of the installation:

A functional test of the installation should be made for each data or telephone outlet.

Installing the device into the wall box

(for example "RJ11 + RJ45 outlet")

4

Technical diagram of a mechanical assembly with a bracket and tool, showing no text or symbols

■ After wiring, fix the device with the two screws attached into the wall box (4).

Assembling the covers

(for example "RJ11 + RJ45 outlet")

5A

Hager Muse

5B

Hager Inspire

■ Hager Muse: Snap the frame onto the device (5A).
■ Hager Inspire: Place the cover plate in the correct position and fix with frame (5B).

2-5gang frames are available for multiple combinations.