Helium 600 - Loudspeaker Natec - Free user manual and instructions

Product Type	Portable Bluetooth Speaker
Brand	Natec
Model	Helium 600
Dimensions (W x H x D)	Approximately 4.5 x 3.5 x 4.5 inches (11.5 x 9 x 11.5 cm)
Weight	Approximately 0.8 lbs (360 g)
Power Source	Built-in rechargeable lithium-ion battery (3.7V, 1200mAh)
Charging	Micro USB cable (DC 5V, 1A)
Playback Time	Up to 6 hours at moderate volume
Wireless Connectivity	Bluetooth 4.2, range up to 33 ft (10 m)
Additional Inputs	3.5mm AUX input
Speaker Output	3W RMS
Controls	Power, Volume +/- , Play/Pause, Next/Previous track, Hands-free call
Built-in Microphone	Yes, for speakerphone function
Supported Audio Profiles	A2DP, AVRCP, HFP
Frequency Response	100 Hz - 20 kHz
Impedance	4 ohms
Signal-to-Noise Ratio	≥ 80 dB
Operating Temperature	32°F – 95°F (0°C – 35°C)
Cleaning and Maintenance	Wipe with a soft, dry cloth. Avoid moisture and direct sunlight.
Safety Precautions	Do not expose to rain or water. Disconnect during thunderstorms if charging.
Spare Parts and Repairability	Not user-serviceable. Contact Natec support for issues.
Package Contents	Helium 600 Speaker, Micro USB Cable, AUX Cable, User Manual

Frequently Asked Questions - Helium 600 Natec

How do I pair the Natec Helium 600 with my phone via Bluetooth?

Turn on the speaker by pressing the power button. Then, press the Bluetooth button to enter pairing mode (the indicator will flash blue). On your phone, enable Bluetooth and select 'Helium 600' from the available devices. Once connected, the indicator will become solid blue.

How do I charge the speaker?

Connect the included Micro USB cable to the charging port on the speaker and plug the other end into a USB power source (e.g., a computer or USB wall charger). The LED indicator will turn red during charging and turn off or change to blue when fully charged.

Can I use the speaker while it is charging?

Yes, the speaker can be used while charging. However, it is recommended to fully charge before first use for optimal battery performance.

How do I reset the speaker?

To reset, press and hold the power button for about 10 seconds until the device powers off and restarts. Alternatively, you can turn off the speaker and then turn it on again.

What should I do if the speaker is not connecting to Bluetooth?

Ensure the speaker is in pairing mode (flashing blue light). Also, check that your phone's Bluetooth is turned on and no other devices are connected. Try turning off the speaker and your phone's Bluetooth, then repeat the pairing process. If the issue persists, reset the speaker.

How do I use the AUX input?

Plug one end of a 3.5mm audio cable into the AUX port on the speaker and the other end into your audio source (e.g., phone, laptop). The speaker will automatically switch to AUX mode. Use the controls on your audio source for playback.

Can I answer phone calls with the speaker?

Yes, the Natec Helium 600 has a built-in microphone. When a call comes in, the music will pause and you can press the multi-function button to answer. Press it again to hang up.

How do I adjust the volume?

Use the Volume + and Volume - buttons on the speaker. You can also adjust the volume from your connected device for finer control.

What is the range of the Bluetooth connection?

The Bluetooth range is approximately 33 feet (10 meters) in open space. Walls and obstacles may reduce the effective range.

How long does the battery last?

The built-in battery provides up to 6 hours of playback at moderate volume. Actual battery life may vary depending on volume level, music content, and usage of features like speakerphone.

USER MANUAL Helium 600 Natec

graph TD
    A["VOLUME"] --> B["Input"]
    B --> C["Power ON OFF"]
    D["BASS"] --> E["Output"]
    E --> F["Smartphone"]
    F --> G["Laptop"]
    G --> H["Computer"]
    H --> I["Power Source"]
    I --> J["Switch"]
    J --> K["Power Supply"]
    L["L"] --> M["Box with plug icon"]
    N["R"] --> O["Box with plug icon"]
    P["L"] --> Q["Box with plug icon"]
    R["R"] --> S["Box with plug icon"]

EN
PL
CZ
SK
DE
RO

PACKAGE CONTENT

• 2.1 gaming speakers
• Wired Remote control
- Quick installation guide

WARRANTY

• 2 years limited manufacturer warranty

SAFETY INFORMATION

• Use as directed.
- Non-authorized repairs or taking the device to pieces make the warranty void and may cause the product damage.
- Avoid to hit or friction with a hard object, otherwise it will lead to grind surface or other hardware damage.
- Do not use the product in low and high temperatures, in strong magnetic fields and in the damp or dusty atmosphere.
- Do not drop, knock, or shake the device. Rough handling can break it.
- Slots and openings in the case are provided for ventilation and should not be obscure. Blocking the vents can cause overheating of the device.

GENERAL

• The safe product, conforming to the EU requirements.
• The product is made in accordance with RoHS European standard.
- The WEEE symbol (the crossed-out wheeled bin) using indicates that this product in not home waste. You protect the environment when you recycle hazardous waste appropriately. In order to get detailed information about recycling this product please contact your retailer or a local authority.

RoHS

INSTALACJA

graph TD
    A["VOLUME"] --> B["Power ON OFF"]
    C["BASS"] --> D["Input"]
    D --> E["Laptop"]
    D --> F["Laptop"]
    D --> G["Laptop"]
    E --> H["Speaker Module L"]
    F --> I["Speaker Module R"]
    G --> J["Speaker Module L"]
    G --> K["Speaker Module R"]

EN

PL

CZ

SK

DE

RO

ZAWARTOŚĆ

Abstract spiral pattern with concentric circles and a central spiral (no text or symbols)

WWW.GENESIS-ZONE.COM

PRODUCT & SUPPORT

INFORMATION

PLEASE SCAN QRCODE

NATEC GENESIS All rights reserved. NATEC GENESIS name and logo, and all related product and service names, design marks and slogans are the trademark of registered trademarks of NATEC GENESIS. All other product and service marks contained herein are the trademarks of their respective owners.