AirStation WCR-G300 - Router BUFFALO - Free user manual and instructions
Find the device manual for free AirStation WCR-G300 BUFFALO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Router |
| Model | AirStation WCR-G300 |
| Brand | Buffalo |
| Wireless Standard | 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Wireless Speed | 300 Mbps |
| LAN Ports | 4 x 10/100 Mbps |
| WAN Port | 1 x 10/100 Mbps |
| Antenna Type | Internal |
| Security | WPA/WPA2, WEP, MAC Filtering |
| Dimensions (W x D x H) | 118 x 146 x 22 mm |
| Weight | 200 g |
| Power Supply | DC 5V, 1A |
| Power Consumption | ~5 W |
| Operating Temperature | 0°C to 40°C |
| Humidity | 20% to 80% (non-condensing) |
| LED Indicators | Power, Internet, LAN, WLAN |
| Reset Button | Yes |
| Mounting | Desktop |
| Compliance | CE, FCC |
Frequently Asked Questions - AirStation WCR-G300 BUFFALO
What is the default IP address of the Buffalo AirStation WCR-G300?
The default IP address is 192.168.11.1 for access to the web-based setup page.
How do I reset the router to factory defaults?
Press and hold the Reset button on the back panel for about 5 seconds until the power LED flashes. Release the button; the router will reboot with factory settings.
What security modes does the WCR-G300 support?
It supports WEP, WPA-PSK, and WPA2-PSK for encryption. It also offers MAC address filtering.
Can I use the WCR-G300 as a wireless repeater?
Yes, it supports Wireless Repeater mode. Access the web interface and configure it under Wireless Settings > Bridge/Repeater.
What is the maximum wireless speed?
The maximum theoretical speed is 300 Mbps using 802.11n on the 2.4 GHz band.
How many wired LAN ports does it have?
It has 4 LAN ports (10/100 Mbps) and 1 WAN port for internet connection.
Does the router support IPv6?
Yes, it supports IPv6 pass-through and static IPv6 configuration in the advanced settings.
How do I update the firmware?
Download the latest firmware from Buffalo's support site. Log in to the web interface, go to System > Firmware Update, and upload the file.
What is the default SSID and password?
The default SSID is printed on the label (usually 'Buffalo-WCR-G300-xxxx'). The default password is also on the label, often referred to as Network Key.
Can I connect a USB printer or drive?
No, the WCR-G300 does not have any USB ports. It is a basic router with no USB functionality.
User questions about AirStation WCR-G300 BUFFALO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual AirStation WCR-G300 - BUFFALO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AirStation WCR-G300 by BUFFALO.
