Q: Why does the Power button blink when turning on?

The blinking of the Power button when turning on is a normal behavior of the UNOLD LUIGI 68816 oven. Here is what happens during startup: A brief beep sounds All indicators light up, then turn off The Power button blinks for a few seconds This is the standard initialization sequence of the device. Once this blinking phase is complete, press the Power button to select a program. The indicator for the chosen program will light up and the display will show the temperature and time settings. If the Power button continues to blink indefinitely without responding to presses, check that the device is not in standby mode after a prolonged period of inactivity.

Q: What is the noise level of the UNOLD Cooler Fresh 86990 fan?

The noise level of the UNOLD Cooler Fresh 86990 fan is 67.27 dB(A) . To give you a point of reference, this noise level is comparable to that of a normal conversation or a vacuum cleaner. It is a relatively discreet level for a cooling device, making it suitable for continuous use in a living room or bedroom, especially thanks to its 3 operating modes (Standard, Natural, Sleep) and its 3 adjustable speeds that allow you to adapt the noise to your needs.

Q: What should I do if the Sofie 48950 leaks from the faucet's drainage hole?

Leak at the ice outlet: diagnosis and solutions Symptom: Liquid continuously escapes from the small drainage hole under the faucet, even when it is closed. This type of leak generally indicates a sealing problem at the piston (also called the control column) of the faucet. Here’s how to proceed: Diagnosis and repair Check the position of the white piston: According to the manual, if the faucet is difficult to operate or leaks, the piston must be properly positioned. Ensure it slides smoothly and is not twisted. Cleaning the mechanism: Remove the piston and clean it thoroughly with warm water. Ice or food residues can prevent proper sealing. Allow it to dry completely before reinserting. Check for wear: Inspect the sealing rings of the piston. A worn or damaged ring causes the observed leaks. Replacement of parts If cleaning does not eliminate the leak, the following parts may be defective and require replacement: Piston (Kolben) Sealing rings Complete outlet unit (Auslasseinheit) You can order the parts directly from UNOLD service: Phone: +49 (0) 6205/9418-27 Email: service@unold.de Website: www.unold.de The manual contains an order form (pages dedicated to spare parts). Provide the model number Sofie 48950 and describe your problem. If possible, attach photos to expedite the processing of your request.

Question 1

Why does the Power button blink when turning on?

Accepted Answer

The blinking of the Power button when turning on is a normal behavior of the UNOLD LUIGI 68816 oven.

Here is what happens during startup:

A brief beep sounds
All indicators light up, then turn off
The Power button blinks for a few seconds

This is the standard initialization sequence of the device. Once this blinking phase is complete, press the Power button to select a program. The indicator for the chosen program will light up and the display will show the temperature and time settings.

If the Power button continues to blink indefinitely without responding to presses, check that the device is not in standby mode after a prolonged period of inactivity.

Question 2

What is the noise level of the Nebula Touch Digital 86930 fan?

Accepted Answer

The official manual for the Nebula Touch Digital 86930 fan does not specify the noise level in decibels (dB).

The technical manual provided by UNOLD documents the following specifications:

Dimensions: approximately 40 x 40 x 120 cm
Weight: approximately 5.6 kg
Blade diameter: approximately 38 cm
Power supply: 220-240 V~, 50 Hz
Water tank: 3 liters
Speeds: 3 adjustable levels (low, medium, high)
Humidification: 3 adjustable power levels

The manufacturer has not included acoustic data in this documentation. To obtain the exact noise level, we recommend contacting UNOLD customer service directly who can provide you with this technical information.

Question 3

What is the noise level of the UNOLD Cooler Fresh 86990 fan?

Accepted Answer

The noise level of the UNOLD Cooler Fresh 86990 fan is 67.27 dB(A).

To give you a point of reference, this noise level is comparable to that of a normal conversation or a vacuum cleaner. It is a relatively discreet level for a cooling device, making it suitable for continuous use in a living room or bedroom, especially thanks to its 3 operating modes (Standard, Natural, Sleep) and its 3 adjustable speeds that allow you to adapt the noise to your needs.

Question 4

What should I do if the Sofie 48950 leaks from the faucet's drainage hole?

Accepted Answer

Leak at the ice outlet: diagnosis and solutions

Symptom: Liquid continuously escapes from the small drainage hole under the faucet, even when it is closed.

This type of leak generally indicates a sealing problem at the piston (also called the control column) of the faucet. Here’s how to proceed:

Diagnosis and repair

Check the position of the white piston: According to the manual, if the faucet is difficult to operate or leaks, the piston must be properly positioned. Ensure it slides smoothly and is not twisted.
Cleaning the mechanism: Remove the piston and clean it thoroughly with warm water. Ice or food residues can prevent proper sealing. Allow it to dry completely before reinserting.
Check for wear: Inspect the sealing rings of the piston. A worn or damaged ring causes the observed leaks.

Replacement of parts

If cleaning does not eliminate the leak, the following parts may be defective and require replacement:

Piston (Kolben)
Sealing rings
Complete outlet unit (Auslasseinheit)

You can order the parts directly from UNOLD service:

Phone: +49 (0) 6205/9418-27
Email: service@unold.de
Website: www.unold.de

The manual contains an order form (pages dedicated to spare parts). Provide the model number Sofie 48950 and describe your problem. If possible, attach photos to expedite the processing of your request.

Question 5

Can you bake a 500 g loaf with the UNOLD Backmeister Big 68520 bread machine?

Accepted Answer

Yes, the UNOLD Backmeister Big 68520 bread machine allows you to bake a 500 g loaf. It is designed to accommodate different sizes of bread, generally ranging from 500 g to larger volumes.

Tips for baking a 500 g loaf:

Use a suitable recipe: Choose a recipe specifically intended for a 500 g loaf to ensure the proportions of the ingredients are correct.
Set the machine: Select the program corresponding to the size of the loaf (500 g) if your machine offers this option.
Follow the steps: Add the ingredients in the order recommended by the manual and make sure the dough has enough time to rise.

By following these tips, you will achieve a well-baked and tasty loaf with your UNOLD Backmeister Big 68520.

Question 6

Can you bake a 500 g cake in the UNOLD Backmeister Big 68520 bread machine?

Accepted Answer

Yes, you can definitely bake a 500 g cake in the UNOLD Backmeister Big 68520 bread machine. This machine has a capacity of 1.5 kg and 15 programs, several of which are suitable for cakes. A 500 g cake represents about one third of the total capacity, which is ideal for even baking.

Recommended program: Use the program 8 “CAKES/LOW CARB”, specifically designed for preparing cakes with baking powder or cream of tartar. This program lasts about 1 hour 30 to 1 hour 40 minutes depending on the size of the cake. Simply pour your cake batter into the pan and start the program.

Alternative with separate baking: You can also prepare your cake batter using program 9 “KNEAD” (only 10 minutes of kneading, without baking), then use program 14 “BAKING” (about 1 hour) to bake your batter. This method gives you more control over the batter before baking.

Practical tips: Follow the proportions of your specific recipe adapted to the machine and do not exceed the maximum level indicated in the pan. If you use program 8, you can adjust the browning degree of the crust (light, medium, or dark) according to your preferences. Let the cake cool for at least 15 minutes after baking before unmolding.

User manual UNOLD : user manuals and guides in PDF

Models UNOLD most viewed

Browse manuals UNOLD by appliance type

Recent questions about devices UNOLD