Question 1

How many kilometers can you drive on reserve in a Nissan Pixo when the warning light is flashing?

Accepted Answer

When the reserve light is flashing on your Nissan Pixo, the tank contains very little fuel. Depending on your vehicle's specifications, you still have a limited range before running out of fuel.

Estimated range on reserve

The Nissan Pixo has a 35-liter tank. Depending on your transmission, the combined fuel consumption varies:

5-speed manual transmission: 4.4 L/100 km - you can drive approximately 50 to 80 km on reserve
4-speed automatic transmission: 5.2 L/100 km - you can drive approximately 40 to 65 km on reserve

Practical tips

These figures are theoretical and heavily depend on your driving style (accelerations, braking), the type of road (urban, highway), and weather conditions. In the city, fuel consumption increases, reducing your reserve range. To avoid running out of fuel, go to the gas station as soon as the light flashes and do not delay.

Remember: you must use unleaded gasoline RON 95 for your Pixo. Prolonged driving on reserve can damage the fuel pump.

Question 2

Where can I find the engine fuse box diagram for the 2018 Nissan Versa Sedan?

Accepted Answer

The engine fuse box diagram for the 2018 Nissan Versa Sedan is located on the cover of the fuse box itself, situated in the engine compartment on the right side panel. Your vehicle has three distinct fuse boxes: one main engine fuse box and an additional fuse box in the engine compartment, plus a third one in the cabin. The complete fuse diagram is engraved or printed directly on the removable cover of each box.

To locate and access the diagram:

Open the hood of your 2018 Versa
Locate the right side panel of the engine compartment (passenger side)
You will find the main fuse box with its black or gray cover
Gently lift or remove the cover: the complete diagram is displayed there with the amperage and function of each fuse

The main engine fuse box contains fuses protecting essential circuits such as the alternator, cooling fan, fuel pump, engine control system, headlights, and other critical components. Each fuse is identified by its amperage (for example, 10 A, 15 A, 20 A) and its function is clearly indicated on the cover diagram.

An additional fuse box, also located in the engine compartment, contains relays and additional fuses for the charging system, CVT system, ignition relay, and other accessories. Its cover also features a diagram for quickly identifying each component.

If the diagram on the cover is hard to read or damaged, you can refer to the complete owner's manual for the 2018 Nissan Versa or reliable online sources that provide high-resolution photos of the fuse diagram. These sources clearly display the location of each fuse and its specific function to facilitate replacements or electrical troubleshooting.

Question 3

Where is the horn fuse located on a Nissan Pixo?

Accepted Answer

The horn fuse on a Nissan Pixo is located in the interior fuse box, under the dashboard on the driver's side, in position 17. It is a MINI type fuse with a capacity of 15 amps (15A). This fuse protects both the horn circuit and the hazard lights.

How to locate and access the fuse:

Sit in the driver's seat and look under the dashboard, on the left side of the steering wheel.
You will find a black plastic box with a transparent or opaque cover.
Open the cover by gently pulling it or unscrewing it depending on the model (usually easy to grip).
Refer to the diagram engraved or printed inside the cover to identify position 17 corresponding to the horn.
The fuse has a rectangular shape with two metal pins.

Replacing the fuse:

If the fuse is blown (the internal filament will be blackened or broken), carefully remove it by pulling it horizontally.
Replace it with an identical fuse of 15A to avoid any damage to the electrical system.
Reinsert the new fuse by pushing it firmly into its slot.
Close the cover of the fuse box.
Test the horn by pressing the center of the steering wheel.

Important note: If the horn still does not work after replacing the fuse, the problem may be due to the horn relay, the steering wheel switch, or the electrical circuit itself. In this case, consult a Nissan dealer or an automotive electrician.

Question 4

What is the key receiver on a Nissan Pixo and how does it work?

Accepted Answer

The key receiver on a Nissan Pixo is an essential electronic component of the vehicle's access and starting system. It receives the radio signal emitted by the remote key (key fob) to allow for unlocking the doors and starting the engine.

How the key receiver works

Signal reception: When you press a button on the key, it sends a coded signal to the receiver, which is usually located in the dashboard or near the ignition switch.
Validation: The receiver checks that the signal matches the one registered for your vehicle, thus ensuring security against unauthorized access.
Action: Once the signal is validated, the system allows for the unlocking of the doors or the starting of the engine.

Common issues related to the key receiver

The vehicle does not detect the remote key.
Unable to unlock the doors with the remote.
The engine does not start despite the presence of the key.

What to do in case of malfunction?

First, check the condition of the remote key's battery.
If the problem persists, an electronic diagnosis is often necessary to check the receiver and the anti-theft system.
Contact a professional or a Nissan dealer for expertise and possible repair.

Question 5

What should I do if the key for my Nissan Pixo is not working?

Accepted Answer

If your Nissan Pixo key is not working, several causes may be behind this issue. Here are the steps to follow to identify and resolve the situation:

1. Check the key battery

If your key is a remote, the battery may be dead. Replace the battery with a new compatible one and test the key again.

2. Resynchronize the key with the vehicle

It is possible that the key has lost its synchronization with the car's system. To resynchronize:

Insert the key into the ignition and turn it to the "ON" position without starting the engine.
Press the lock/unlock button on the key several times according to the specific instructions for your model.
Turn off the ignition and remove the key, then test the remote.

Note: The exact steps may vary, but this procedure is generally effective.

3. Inspect the key for damage

Examine the key for signs of wear, breakage, or moisture. A damaged key may not function properly and may need to be replaced.

4. Test another key

If you have a second key, try using it. If it works, the problem is likely with the first key.

5. Check the vehicle's receiver

If no key works, the problem may be with the electronic receiver in the car. In this case, technical intervention is necessary.

By following these steps, you can often resolve the issue of a non-functional key for your Nissan Pixo.

User manual NISSAN : user manuals and guides in PDF

Models NISSAN most viewed

Browse manuals NISSAN by appliance type

Recent questions about devices NISSAN