Question 1

How to back up my computer to the LACIE Cloudbox 2TB using rsync?

Accepted Answer

To back up your computer to the LACIE Cloudbox 2TB via rsync, you first need to set up SSH access on your NAS, then use rsync from the command line on your computer.

Main Steps:

Check network connectivity: ensure that your Cloudbox 2TB and your computer are on the same local network (or accessible via the network).
Enable SSH: log in to the web interface of the Cloudbox (usually via http://cloudbox.local or its IP address), then enable SSH in the network/security settings.
Note the credentials: you will need the username (usually "admin" or your created user), the password, and the IP address or hostname of the Cloudbox.
Use rsync: on your computer (Mac, Linux, or Windows with WSL), run a command like:
rsync -avz --delete /path/to/folder/ user@cloudbox_ip_address:/destination/path/
Replace "/path/to/folder/" with the folder to back up, "user" with your username, "cloudbox_ip_address" with the NAS's IP, and "/destination/path/" with the destination path on the Cloudbox.

To automate regular backups, you can add this rsync command to a scheduled task (cron on Linux/Mac, Task Scheduler on Windows).

Question 2

How can I know the storage capacity of my Lacie D2 Quadra without connecting it to the computer?

Accepted Answer

The PDF manual does not mention any physical markings to identify the capacity directly on the drive. Here are reliable methods to determine the capacity without a computer connection:

The original packaging - The capacity (1 TB, 2 TB, 4 TB, or 10 TB) is clearly indicated on the box. This is the most direct method.
Your receipt or order confirmation - The volume is mentioned in the name of the purchased product.
The serial number - The D2 Quadra has a serial number (visible on the back or side). You can contact LaCie support with this number or visit lacie.com to look up your model.
Commercial documentation - Any invoice or delivery label accompanying the product.

Note: Contrary to what you mentioned, the D2 Quadra has other ports in addition to USB-C. According to the manual, it has USB 2.0, FireWire 400, FireWire 800, and eSATA connectors. If you have access to any of these cables, you can connect the drive without a USB-C adapter.

User manual LACIE : user manuals and guides in PDF

Models LACIE most viewed

Browse manuals LACIE by appliance type

Recent questions about devices LACIE