Question 1

What do the thermostat indications of the AMICA FK268.3 X AA refrigerator mean?

Accepted Answer

The thermostat of the AMICA FK268.3 X AA refrigerator has 7 adjustment positions plus an off position. By turning the selector, you directly control the temperature of the appliance. Here is the exact meaning of the positions:

Position OFF/0: The appliance is completely turned off.
Position 1: The least cold temperature (maximum heat inside).
Positions 2 to 6: Average temperature set in the appliance.
Position 7: The coldest temperature (maximum cooling).

Recommended setting: A temperature of 4°C is sufficient and optimal for food preservation. In practice, the average position (between 2 and 6) usually allows for this ideal setting. Do not unnecessarily turn up to position 7, which is reserved for exceptional periods requiring maximum cooling.

After starting the appliance, please allow a minimum of 4 hours before storing food inside. The temperature inside depends on several factors: ambient temperature, sunlight exposure, frequency of door openings, and the amount of food present. It is not necessary to adjust the thermostat according to the seasons, as an external probe detects changes in ambient temperature and automatically adjusts the compressor to maintain the desired temperature.

Important: The thermostat selector may have slightly different graduations depending on the manufacturing revision. However, the principle of operation remains the same: the more you turn towards the higher numbers, the more intense the cooling. Small temperature variations may occur after storing large quantities of fresh products or after prolonged door openings. This phenomenon is normal and does not affect food quality; the appliance will quickly return to its set temperature once closed.

Question 2

How to remove the tray located above the compressor on the AMICA FK2965.3GAA refrigerator?

Accepted Answer

To remove the tray located above the compressor on your AMICA FK2965.3GAA refrigerator, follow these simple steps:

Steps to remove the tray:

Unplug the appliance: Make sure the refrigerator is unplugged from the electrical outlet to ensure your safety.
Empty and prepare the space: Remove the food, shelves, and drawers located in the lower part to easily access the tray.
Locate the fasteners: Examine how the tray is secured. It may be held by screws or clips.
Loosen the fasteners: Use an appropriate screwdriver to remove the screws or gently unclip the clips holding the tray.
Remove the tray: Gently lift the tray by sliding or pulling it according to its fastening system. Be careful not to force it to avoid damaging the parts.
Clean if necessary: Take this opportunity to clean the area above the compressor and the tray itself before putting it back or replacing it.

By following these tips, you will be able to safely and easily remove the tray.

Question 3

What is the best temperature setting for the AMICA KGCL 386 160 W refrigerator-freezer?

Accepted Answer

To ensure optimal food preservation in your AMICA KGCL 386 160 W refrigerator-freezer, it is essential to adhere to the temperature settings specified by the manufacturer. According to the official manual, the optimal temperature for the refrigerator should be between 6 and 8°C to keep food fresh while effectively limiting bacterial growth. This temperature range ensures proper preservation of dairy products, meats, and other fresh foods.

The temperature of the freezer should be maintained at -18°C or lower to ensure long-term preservation of frozen foods and allow for the freezing of new provisions. This temperature is the minimum standard to prevent the formation of ice crystals and preserve the nutritional quality of your food.

Your AMICA KGCL 386 160 W is equipped with a dial thermostat located inside the refrigerator. A lower setting on the dial indicates a colder temperature. Gradually adjust the thermostat until you reach the target temperatures, then wait a few hours before checking with a thermometer to ensure the temperatures have stabilized.

Temperature checking: Regularly use a thermometer placed in the refrigerator compartment and in the freezer to ensure that temperatures remain within the recommended ranges. This check is particularly important during the first few days after installation or after adjusting the thermostat.

Avoid overloading the compartments, as this hinders the circulation of cold air necessary to maintain uniform temperatures
Gradually adjust the settings based on the amount of food stored and the ambient room temperature (between 16°C and 32°C for optimal operation according to technical specifications)
Do not place food directly against the back walls of the refrigerator where cold air circulates intensely, as this could freeze them
Allow cooled air to circulate freely by ensuring that internal ventilation grilles are not obstructed

By adhering to these precise temperature settings, you will optimize the performance of your AMICA KGCL 386 160 W, reduce its energy consumption (250 kWh annually according to specifications), and significantly prolong the freshness and nutritional quality of your food.

User manual AMICA : user manuals and guides in PDF

Models AMICA most viewed

Browse manuals AMICA by appliance type

Recent questions about devices AMICA