Question 1

What do the thermostat indications of the AMICA FK268.3 X AA refrigerator mean?

Accepted Answer

The thermostat of the AMICA FK268.3 X AA refrigerator has 7 adjustment positions plus an off position. By turning the selector, you directly control the temperature of the appliance. Here is the exact meaning of the positions:

Position OFF/0: The appliance is completely turned off.
Position 1: The least cold temperature (maximum heat inside).
Positions 2 to 6: Average temperature set in the appliance.
Position 7: The coldest temperature (maximum cooling).

Recommended setting: A temperature of 4°C is sufficient and optimal for food preservation. In practice, the average position (between 2 and 6) usually allows for this ideal setting. Do not unnecessarily turn up to position 7, which is reserved for exceptional periods requiring maximum cooling.

After starting the appliance, please allow a minimum of 4 hours before storing food inside. The temperature inside depends on several factors: ambient temperature, sunlight exposure, frequency of door openings, and the amount of food present. It is not necessary to adjust the thermostat according to the seasons, as an external probe detects changes in ambient temperature and automatically adjusts the compressor to maintain the desired temperature.

Important: The thermostat selector may have slightly different graduations depending on the manufacturing revision. However, the principle of operation remains the same: the more you turn towards the higher numbers, the more intense the cooling. Small temperature variations may occur after storing large quantities of fresh products or after prolonged door openings. This phenomenon is normal and does not affect food quality; the appliance will quickly return to its set temperature once closed.

Question 2

How to remove the tray located above the compressor on the AMICA FK2965.3GAA refrigerator?

Accepted Answer

To remove the tray located above the compressor on your AMICA FK2965.3GAA refrigerator, follow these simple steps:

Steps to remove the tray:

Unplug the appliance: Make sure the refrigerator is unplugged from the electrical outlet to ensure your safety.
Empty and prepare the space: Remove the food, shelves, and drawers located in the lower part to easily access the tray.
Locate the fasteners: Examine how the tray is secured. It may be held by screws or clips.
Loosen the fasteners: Use an appropriate screwdriver to remove the screws or gently unclip the clips holding the tray.
Remove the tray: Gently lift the tray by sliding or pulling it according to its fastening system. Be careful not to force it to avoid damaging the parts.
Clean if necessary: Take this opportunity to clean the area above the compressor and the tray itself before putting it back or replacing it.

By following these tips, you will be able to safely and easily remove the tray.

User manual AMICA Fridge : user manuals and guides in PDF

Models AMICA Fridge most viewed

Other categories AMICA

Recent questions about Fridge AMICA