BLUETOOTH HEADSET BH-301 - Accessoire audio NOKIA - Notice d'utilisation et mode d'emploi gratuit

Type de produit	Casque Bluetooth mono-écouteur
Marque	Nokia
Modèle	BH-301
Technologie Bluetooth	Bluetooth 2.0 + EDR
Profils Bluetooth	Profil casque 1.1, Profil mains-libres 1.5
Portée maximale	Jusqu'à 10 mètres
Autonomie en conversation	Jusqu'à 7 heures
Autonomie en veille	Jusqu'à 200 heures
Temps de charge	Environ 2 heures
Type de batterie	Batterie rechargeable intégrée non amovible
Chargeurs compatibles	AC-3, AC-4, DC-4
Poids	Environ 20 g
Dimensions	Environ 50 x 20 x 10 mm
Couleur	Noir (standard)
Indicateur lumineux	Rouge (charge), vert (allumé)
Touches	Volume +/-, Répondre/Fin, Marche/Arrêt
Microphone	Intégré
Fixation	Crochet d'oreille
Entretien et nettoyage	Garder au sec, éviter poussière et solvants, ne pas ouvrir
Sécurité	Pièces magnétiques, ne pas exposer à la chaleur, ne pas jeter au feu
Pièces détachées et réparabilité	Batterie non remplaçable, service agréé pour réparation
Informations générales	Homologation CE, fabriqué par Nokia

FOIRE AUX QUESTIONS - BLUETOOTH HEADSET BH-301 NOKIA

Comment associer le casque Nokia BH-301 avec mon téléphone ?

Allumez le casque (maintenez la touche Marche/Arrêt jusqu'à ce que le voyant vert clignote). Activez le Bluetooth de votre téléphone et recherchez les appareils. Sélectionnez 'Nokia BH-301' dans la liste et entrez le code 0000 pour associer.

Comment recharger le casque BH-301 ?

Branchez le chargeur compatible (AC-3, AC-4 ou DC-4) sur une prise secteur, puis connectez le câble au connecteur du casque. Le voyant rouge s'allume pendant la charge et s'éteint quand la batterie est pleine (environ 2 heures).

Quelle est l'autonomie du casque ?

L'autonomie en conversation est jusqu'à 7 heures et en veille jusqu'à 200 heures. Les performances peuvent varier selon le téléphone et l'utilisation.

Comment régler le volume du casque ?

Utilisez les touches de volume situées sur le côté du casque (haut pour augmenter, bas pour diminuer) pendant un appel.

Le casque ne s'allume pas, que faire ?

Assurez-vous que la batterie est chargée. Si le voyant ne s'allume pas, branchez le chargeur. Si le problème persiste, réinitialisez le casque : branchez-le au chargeur, puis appuyez brièvement simultanément sur la touche Marche/Arrêt et la touche Répondre/Fin.

Comment réinitialiser le casque Nokia BH-301 ?

Pour effacer les réglages, maintenez enfoncées la touche Marche/Arrêt et la touche Répondre/Fin pendant plus de 10 secondes. Pour réinitialiser en cas de dysfonctionnement, branchez le chargeur et appuyez brièvement sur les deux touches en même temps.

Puis-je utiliser le casque avec n'importe quel téléphone ?

Le casque est compatible avec les téléphones supportant le Bluetooth et les profils casque ou mains-libres. Vérifiez la compatibilité auprès du fabricant de votre téléphone. La portée est d'environ 10 mètres sans obstacle.

Comment basculer un appel du téléphone au casque ?

Pendant un appel, maintenez enfoncée la touche Répondre/Fin pour transférer le son entre le casque et le téléphone (avec un téléphone Nokia compatible).

Que faire si le casque sonne plusieurs fois et que la batterie est faible ?

Lorsque la batterie est faible, le casque émet une série de bips et le voyant rouge clignote. Rechargez la batterie dès que possible.

Comment nettoyer le casque Nokia BH-301 ?

Utilisez un chiffon doux et sec. N'utilisez pas de produits chimiques, de solvants ou de détergents agressifs. Évitez l'humidité et la poussière.

MODE D'EMPLOI BLUETOOTH HEADSET BH-301 NOKIA

Nokia Bluetooth Headset

BH-301

9253916/Issue1

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares that this HS-51W product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/ declaration_of_conformity/.

C€0434

© 2006 Nokia. All rights reserved.

Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.

Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.

To the maximum extent permitted by applicable law, under no circumstances shall Nokia or any of its licensors be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.

The availability of particular products may vary by region. Please check with your Nokia dealer for details. Unauthorized changes or modifications to this device may void the user's authority to operate the equipment.

Introduction

The Nokia Bluetooth Headset BH-301 allows you to make and receive calls while on the move. You can use the headset with compatible phones that support Bluetooth wireless technology. Read this user guide carefully before using the headset. Also read the user guide for your phone, which provides important safety and maintenance information. Keep all accessories and enhancements out of reach of small children.

Export Controls

This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.

Bluetooth wireless technology

Bluetooth wireless technology allows you to connect compatible devices without cables. A Bluetooth connection does not require that the phone and the headset be in line of sight, but both devices should be within 10 meters (30 feet) of each other.

Connections may be subject to interference from obstructions, such as walls, or other electronic devices.

The headset complies with the Bluetooth Specification 2.0 + EDR that supports the Headset Profile 1.1 and Hands-Free Profile 1.5. Check with the manufacturers of

other devices to determine their compatibility with this headset. There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.

Get started

The headset contains the following parts shown on the title page: volume key (1), answer/end key (2), charger connector (3), power key (4), microphone (5), indicator light (6), and earhook (7).

Before using the headset, you must charge the battery and pair the headset with a compatible phone.

Parts of the headset are magnetic. Metallic materials may be attracted to the headset. Do not place credit cards or other magnetic storage media near

the headset, because information stored on them may be erased.

Chargers

Check the model number of any charger before using it with this headset. The headset is intended for use with the AC-3, AC-4, and DC-4 chargers.

Warning: Use only chargers approved by Nokia for use with this particular headset. The use of any other types may invalidate any approval

or warranty and may be dangerous.

For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

Charge the battery

The headset has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the headset, as you may damage the headset.

1. Connect the charger to a wall outlet.
2. Connect the charger cable to the charger connector on the headset. The red indicator light is on while charging. It may take a while before charging starts. If charging does not

start, connect the charger again and retry. Charging the battery fully may take up to 2 hours.

1. When the battery is fully charged, the red indicator light turns off. Disconnect the charger from the headset and the wall outlet.

The fully charged battery has power for up to 7 hours of talk-time or up to 200 hours of standby time. However, the talk and standby times may vary when the headset is used with different mobile phones or other compatible Bluetooth devices, usage settings, usage styles, and environments.

When battery power is low, the headset sounds a series of beeps and the red indicator light starts to flash.

Switch the headset on or off

To switch on, press and hold the power key until the green indicator light starts to flash.

To switch off, press and hold the power key until the red indicator light is displayed briefly.

Pair the headset

1. Switch on your phone and the headset.
2. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices.
3. Select the headset from the list of found devices.
4. Enter the passcode 0000 to pair and connect the headset to your

phone. In some phones you may need to make the connection separately after pairing. You only need to pair the headset with your phone once.

If the pairing is successful, the headset beeps and appears in the phone menu where you can view the currently paired Bluetooth devices.

To disconnect the headset from your phone, switch off the headset or disconnect it in the Bluetooth menu of your phone.

To connect the headset to your phone, make the connection in the Bluetooth menu of your phone.

Wear the headset

Slide the headset around your ear, and point it toward your mouth (8).

Change the cover

To remove the current cover, lift it from the headset starting from the microphone end (9). To attach a new cover, carefully press it into place (10).

Call handling

To make a call, use your phone in the normal way when the headset is connected to your phone.

If your phone supports last number redialing with the headset, press

the answer/end key twice briefly while no call is in progress.

If your phone supports voice dialing with the headset, press and hold the answer/end key when no call in progress, and proceed as described in the user guide of your phone.

To answer or end a call, press the answer/end key. To reject the call, briefly press the answer/end key twice.

To switch the call between the headset and a compatible Nokia phone, press and hold the answer/end key.

To adjust the headset volume, press the volume key up or down.

Clear the settings or reset the headset

To clear the settings, press and hold the power key and the answer/end key over 10 seconds.

To reset the headset if it does not function properly, although it is charged, plug the headset into a charger, and briefly press the power key and the answer/end key at the same time.

4s16u3

Battery information

Your headset is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this headset.

Unplug the charger from the electrical plug and the headset when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.

Never use any charger that is damaged.

Leaving the headset in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15^ and 25^ (59°F and 77°F). A headset with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.

Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local

regulations. Please recycle when possible. Do not dispose as household waste.

Care and maintenance

Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage.

• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely.
• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.
• Do not store the device in hot areas. High temperatures can

shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.
• Do not attempt to open the device.
• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.

• Do not paint the device. Paint can clog the moving parts and prevent proper operation.

All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.