LANCEHEAD - Souris informatique RAZER - Notice d'utilisation et mode d'emploi gratuit

Type de produit	Souris gaming sans fil
Marque	Razer
Modèle	Lancehead
Dimensions (L x l x H)	117 mm x 71 mm x 38 mm
Poids	111 g (sans câble)
Alimentation	Batterie rechargeable intégrée, autonomie d'environ 24 heures (avec éclairage)
Capteur	Capteur laser 5G 16 000 DPI
Commutateurs	Commutateurs mécaniques Razer™
Éclairage	Razer Chroma™ avec 16,8 millions de couleurs et synchronisation entre périphériques
Boutons programmables	9 boutons Hyperresponse indépendamment programmables
Technologie sans fil	Adaptive Frequency Technology (2,4 GHz)
Taux de polling	1000 Hz Ultrapolling
Connectivité	USB sans fil via dongle, filaire via câble USB vers Micro-USB
Logiciel	Razer Synapse 3 (personnalisation des profils, macros, éclairage, performances)
Entretien et nettoyage	Nettoyer avec un chiffon doux légèrement humidifié, sans savon ni produits agressifs
Sécurité	Ne pas ouvrir le boîtier (annule la garantie), éviter tout contact avec des liquides
Pièces détachées incluses	Adaptateur USB, câble USB vers Micro-USB, couvercle inférieur pour rangement du dongle
Garantie	2 ans fabricant limitée

FOIRE AUX QUESTIONS - LANCEHEAD RAZER

Comment charger la souris Razer Lancehead ?

Branchez le câble USB vers Micro-USB fourni à la souris et à un port USB de votre ordinateur. La première charge complète prend environ 4 heures. La souris peut également être utilisée en mode filaire pendant la charge.

Comment passer en mode sans fil ?

Insérez le dongle USB dans un port libre de votre ordinateur, puis mettez l'interrupteur d'alimentation situé sous la souris sur ON. La souris est alors prête à être utilisée sans fil.

Comment personnaliser les boutons et les profils ?

Téléchargez et installez Razer Synapse 3. Créez ou connectez-vous à votre compte Razer. Dans l'onglet 'Personnaliser', vous pouvez attribuer des fonctions (macros, raccourcis, etc.) à chaque bouton. Les profils sont sauvegardés automatiquement et stockés dans le cloud.

Quelle est l'autonomie de la batterie ?

En utilisation sans fil avec l'éclairage Chroma activé, l'autonomie est d'environ 24 heures. Sans éclairage, elle peut être plus longue.

Comment calibrer le capteur pour une surface spécifique ?

Dans Razer Synapse 3, allez dans l'onglet 'Calibration'. Activez la calibration de surface. Si vous utilisez un tapis Razer, sélectionnez-le dans la liste. Pour une surface non Razer, cliquez sur 'Ajouter' et suivez les instructions pour effectuer une calibration manuelle en déplaçant la souris en zigzag.

Que signifie le clignotement rouge de la molette ?

La molette clignote deux fois en rouge à intervalles réguliers lorsque la batterie est inférieure à 15%. Branchez la souris pour la recharger.

Peut-on utiliser la souris en mode filaire uniquement ?

Oui, branchez simplement le câble USB vers Micro-USB directement à l'ordinateur. La souris fonctionnera en mode filaire tout en rechargeant la batterie.

Comment ranger le dongle USB ?

Retirez le couvercle inférieur de la souris, placez le dongle USB dans le compartiment prévu, puis remettez le couvercle en place en vous assurant qu'il est bien enclenché.

Quels sont les réglages DPI par défaut ?

Les paliers DPI par défaut sont : 800, 1800, 4500, 9000 et 16000. Vous pouvez les personnaliser dans Razer Synapse 3, onglet 'Performances'.

Que faire en cas de problème de connexion sans fil ?

Vérifiez que le dongle est bien inséré et que l'interrupteur est sur ON. Essayez de rapprocher le dongle de la souris ou utilisez l'adaptateur USB pour étendre sa portée. Si le problème persiste, réinitialisez la souris en la branchant en mode filaire puis en la redémarrant.

MODE D'EMPLOI LANCEHEAD RAZER

RAZER LANCEHEAD

MASTER GUIDE

Built with Adaptive Frequency Technology, the Razer Lancehead wireless gaming mouse is engineered to consistently seek and connect to the strongest signal, so you get perfectly consistent data transmission, crucial for tournament-grade wireless gaming. Featuring the world's most precise laser sensor and Razer™ Mechanical Mouse Switches, you get performance and durability like never before. Together with Hybrid Memory Storage powered by Razer Synapse 3, you will always have access to your favorite profiles.

CONTENTS

1. PACKAGE CONTENTS / SYSTEM REQUIREMENTS 3
2. REGISTRATION / TECHNICAL SUPPORT 4
3. TECHNICAL SPECIFICATIONS 5
4. DEVICE LAYOUT 6
5. INSTALLING RAZER SYNAPSE FOR YOUR RAZER LANCEHEAD 11
6. CONFIGURING YOUR RAZER LANCEHEAD 7
   7.SAFETY AND MAINTENANCE 45
7. LEGALESE 47

1. PACKAGE CONTENTS / SYSTEM REQUIREMENTS

PACKAGE CONTENTS

Razer Lancehead gaming mouse
USB dongle
USB dongle adapter
USB to Micro-USB cable
Important Product Information Guide

SYSTEM REQUIREMENTS

PRODUCT REQUIREMENTS

PC or Mac with a free USB port

RAZER SYNAPSE 3 REQUIREMENTS

Windows® 7 (or higher)
Internet connection
- 500 MB of free hard disk space

RAZER SYNAPSE REQUIREMENTS

Windows® 7 / OS X (10.9 or higher)
- Internet connection
100 MB of free hard disk space

2. REGISTRATION / TECHNICAL SUPPORT

REGISTRATION

Register your product online at razerzone.com/registration to get real-time information on your product's warranty status.

If you haven't registered for a Razer ID yet, register now at razerzone.com/razer-id to get a wide range of Razer benefits.

Your product's serial number can be found here.

TECHNICAL SUPPORT

What you'll get:

2 years limited manufacturer's warranty.
Free online technical support at razersupport.com.

3. TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS

16,000 DPI 5G laser sensor
- Up to 210 inches per second / 50 G acceleration
Adaptive Frequency Technology
Razer™ Mechanical Mouse Switches
- On-The-Fly Sensitivity Adjustment
Gaming-grade tactile scroll wheel
Ambidextrous design with enhanced rubber side grips
Razer Chroma™ lighting with true 16.8 million customizable color options
Inter-device color synchronization
Nine independently programmable Hyperresponse buttons
1000 Hz Ultrapolling
2.4 GHz dongle
Razer Synopsis 3 enabled
2.1 m / 7 ft. braided fiber USB charging cable
Battery life: Approximately 24 hours (with lighting)**

APPROXIMATE SIZE & WEIGHT

Length: 117 ~mm / 4.6 in
Width: 71 mm / 2.79 in
- Height: 38 ~mm / 1.49 in
Weight: 111 ~g / 0.24 ~lbs

• Excluding cable

** Life expectancy of the battery depends on its usage

4. DEVICE LAYOUT

A. Left mouse button
B. Right mouse button
C. Scroll wheel
D. DPI stage up
E. DPI stage down
F. Mouse button 5
G. Mouse button 4
H. Ultraslick mouse feet

I. True 16,000 DPI 5G laser sensor
J. Profile indicator
K. Profile button
L. Power on/off switch
M. Bottom cover
N. USB dongle
0. USB to Micro-USB cable
P. USB dongle adapter

Default DPI stages are as follows: 800, 1800, 4500, 9000, and 16000. The DPI stages can be customized using Razer software.

5. SETTING UP YOUR RAZER LANCEHEAD

CHARGING YOUR RAZER LANCEHEAD

Using the included USB to Micro-USB cable, plug your Razer Lancehead to the computer.

This connection also acts as the wired mode for your Razer device.

For best results, please fully charge your Razer Lancehead before using it for the first time. A depleted battery will be fully charged in approximately 4 hours. If the Razer Lancehead has not been used for an extended period, you may need to recharge it before use.

The Razer Lancehead requires a USB connection that is able to supply sufficient power to charge the battery. The battery charging process of the Razer Lancehead may be affected if connected to a non-powered USB hub or non-powered USB ports found on certain keyboards and other peripherals. When in doubt, it is preferable to connect the Razer Lancehead directly to the USB port of your computer.

LOW POWER INDICATOR

The Razer Lancehead's scroll wheel will blink red twice in repeated intervals to indicate that the battery's power is less than 15% . This lighting sequence will repeat until the battery is drained or the mouse is connected to the PC via the USB to Micro-USB cable.

The indicator percentage can be customized using Razer software.

USING THE USB DONGLE

1. Plug the USB dongle into your computer's USB port.

1. Switch on the Razer Lancehead.

POWER ON

POWER OFF

Your Razer Lancehead is now ready for use in wireless mode.

USING THE USB DONGLE COMPARTMENT

1. Remove the bottom cover of your Razer Lancehead.

1. Remove the USB dongle from your PC and place it into the storage space.

1. Reattach the bottom cover onto the Razer Lancehead and make sure it is securely fastened.

USING THE USB DANGLE ADAPTER

Use the USB dongle adapter to easily access and extend the reach of your USB dongle.

6. INSTALLING RAZER SOFTWARE FOR YOUR RAZER LANCEHEAD TOURNAMENT EDITION

Step 1: Connect your Razer device to the USB port of your computer.
Step 2: Install Razer Synapse 3 when prompted* or download either the Razer Synapse 3 or Razer Synapse installer from razerzone.com/software.
Step 3: Create your Razer ID or log into the Razer software with an existing account.

*Applicable for Windows 8 or later.

Note: By default, the Razer Lancehead is set to spectrum cycling. To customize the lighting, please install Razer Synapse 3 or Razer Synapse.

7. CONFIGURING YOUR RAZER LANCEHEAD

Disclaimer: The features listed here require you to log into Razer Synapse. These features are also subject to change based on the current software version and your Operating System.

MOUSE TAB

The Mouse Tab is your default tab when you first install Razer Synapse. This tab allows you to customize your device's profiles, button assignments, performance, lighting, and calibration.

PROFILE

A profile is a convenient way of organizing all your custom settings and you can have an infinite number of profiles at your disposal. Any changes made within each tab are automatically saved to the current profile and stored into the cloud servers.

You can create a new profile by clicking the + button or delete the current profile by clicking

the button. The button allows you to Copy, Import, and Export profiles. Your current profile by default is named "Profile" however; you can rename it by typing on the text field below PROFILE NAME. Each profile can be set to FN + 0 - 9 using the SHORTCUT dropdown menu for fast profile switching. Each profile can also be set to automatically activate when you run a program or application through the use of the LINK PROGRAM option.

CUSTOMIZE TAB

The Customize Tab is where you can modify the basic functionalities of your device such as button assignments to suit your gaming needs. The changes made in this tab are automatically saved to your current profile.

BUTTON ASSIGNMENT MENU

Initially, each key is set to DEFAULT. However, you may change the function of these buttons by clicking the desired button to access the Button Assignment Menu.

Listed below are the customization options and their description.

Default

This option enables you to return the key to its original function. To choose the DEFAULT, simply select it from the Button Assignment Menu.

Keyboard Function

This option enables you to change any key into another keyboard function. To choose a keyboard function, select KEYBOARD FUNCTION from the Button Assignment Menu and enter the key you wish to use on the given field below. You may also include modifier keys such as Ctrl, Shift, Alt or any of those combinations.

This option allows you to change any key into a mouse button function. To choose a mouse function, select MOUSE FUNCTION from the Button Assignment Menu and an ASSIGN BUTTON submenu will appear.

Listed below are the functions which you can choose from the Assign Button submenu:

• Left Click - Performs a left mouse click using the assigned button.
• Right Click - Performs a right mouse click using the assigned button.
• Scroll Click - Activates the universal scrolling function.
• Double Click - Performs a double left click using the assigned button.
• Mouse Button 4 - Performs a "Backward" command for most internet browsers.
• Mouse Button 5 - Performs a "Forward" command for most internet browsers.
• Scroll Up - Performs a "Scroll Up" command using the assigned button.
• Scroll Down - Performs a "Scroll Down" command using the assigned button.
• Scroll Left - Performs a "Scroll Left" command using the assigned button.
• Scroll Right - Performs a "Scroll Right" command using the assigned button.
• Repeat Scroll Up - Continuously performs a "Scroll Up" command as long as the assigned button is pressed.
• Repeat Scroll Down - Continuously performs a "Scroll Down" command as long as the assigned button is pressed.

Sensitivity

Sensitivity refers to how fast the mouse pointer can travel across the screen. When you select the Sensitivity function from the dropdown menu, a sub-menu will appear which gives you access to the following options:

• Sensitivity Clutch - Change to a predefined sensitivity as long as the designated button is pressed. Releasing the button will return it to the previous sensitivity.
• Sensitivity Stage Up – Increase the current sensitivity by one stage. See the PERFORMANCE TAB to learn more about sensitivity stages.

• Sensitivity Stage Down - Decrease the current sensitivity by one stage. See the PERFORMANCE TAB to learn more about sensitivity stages.

• On-The-Fly Sensitivity – Readily adjust the current sensitivity using the assigned button. If On-The-Fly Sensitivity has been set, pressing the designated button and moving the scroll wheel will produce a bar on your screen which would indicate your current sensitivity level.

• Cycle Up Sensitivity Stages – Increase the current sensitivity stage by one and once it reaches the highest sensitivity stage, it will return to stage 1 when the button is pressed again. See the PERFORMANCE TAB to learn more about sensitivity stages.
• Cycle Down Sensitivity Stages – Decrease the current sensitivity stage by one and once it reaches stage 1, it will return to the highest sensitivity stage when the button is pressed again. See the PERFORMANCE TAB to learn more about sensitivity stages.

Inter-device

Inter-device allows you to change the functionality of other Razer Synapse enabled devices. Some of these functionalities are device-specific such as using your Razer gaming keyboard to change the Sensitivity Stage of your Razer gaming mouse. When you select Inter-device from the Button Assignment Menu, a sub-menu will appear.

DEVICE TO LINK allows you to choose which currently connected Razer device can be linked while FUNCTION allows you to choose which functionality you want to use for the linked device.

Macro

A Macro is a prerecorded sequence of keystrokes and button presses that is executed with precise timing. By setting a key to Macro, you can conveniently execute a chain of commands. When you select this option from the Button Assignment Menu, a submenu will appear which allows you to choose a prerecorded macro command. See the MACROS TAB to learn more about creating Macro commands.

Switch Profile

The Switch Profile enables you to change profiles on the fly and immediately load all your preconfigured settings. When you select Switch Profile from the Button Assignment Menu, a submenu will appear that will allow you to choose which profile to use. An on-screen display will automatically appear whenever you switch profiles.

Launch Program

Launch Program allows you to launch a program or a website using the assigned key. When you select Launch Program from the Button Assignment Menu, two options will appear which allow

you to search for the specific program you want to open or write the address of the website you want to visit.

Multimedia Function

This option allows you to bind multimedia playback controls to your device. After selecting Multimedia Function, a submenu will appear. Listed below are the multimedia playback controls you can choose from the submenu:

Volume Down- Decreases the audio output.
Volume Up - Increases the audio output.
Mute Volume - Mutes the audio.
- Mic Volume Up - Increases the microphone volume.
- Mic Volume Down - Decreases the microphone volume.
Mute Mic - Mutes the microphone.
- Mute All - Mute both microphone and audio output.
- Play / Pause - Play, pause, or resume playback of the current media.
Previous Track - Play the previous track.
Next Track - Play the next track.

Windows 8 Charms

This option enables you to assign the key into an Operating System shortcut command. For more information, please visit: http://windows.microsoft.com/en-usWindows-8/getting-around-tutorial

Windows Shortcuts

This option enables you to assign the key into an Operating System shortcut command. For more information, please visit: http://support.microsoft.com/kb/126449

Shortcuts

This option enables you to assign the key into an Operating System shortcut command. For more information, please visit: http://support.apple.com/kb/ht1343

This option renders the assigned key unusable. Use Disable if you do not want to use the key or if it interferes with your gaming.

PERFORMANCE TAB

The Performance Tab allows you to enhance the speed and precision of your mouse pointer. Similar to the Customize Tab, the changes made here are automatically saved to your current profile.

Listed below are the performance options and their descriptions.

Sensitivity

Sensitivity pertains to how much effort is needed to move the mouse pointer in any direction. The higher the sensitivity, the more responsive the mouse will be. (Recommended setting: 1600 – 1800)

Enable X-Y Sensitivity

By default, the X-axis (horizontal) and Y-axis (vertical) use the same sensitivity values. However, you may set different sensitivity values to each of the axes by selecting the ENABLE X-Y SENSITIVITY option.

Configure Sensitivity Stages

A sensitivity stage is a preset sensitivity value. You can create up to 5 different sensitivity stages which you can cycle through using the sensitivity stage up/down buttons. You may use the ENABLE X-Y SENSITIVITY concurrently with this option.

Acceleration

Acceleration increases the cursor's movement speed depending on how quickly you move the mouse. The higher the value, the faster the mouse accelerates. (Recommended settings: Windows 0, Mac 5)

Polling Rate

The higher the polling rate, the more often the computer receives information about the status of your mouse, thus increasing the mouse pointer's reaction time. You can switch between 125Hz (8ms), 500Hz (2ms) and 1000Hz (1ms) by selecting your desired polling rate on the dropdown menu. (Recommended setting: 500Hz – 1000Hz)

LIGHTING TAB

The Lighting Tab on Razer Synapse allows you to customize your Razer device by allowing you to choose from different basic lighting effects or create your own using the Chroma Configurator. If you have other Razer Chroma-enabled devices, you can synchronize their basic lighting effects by

clicking the

button.

Note: Only devices that support the selected lighting effect will synchronize.

Basic lighting effects

A number of basic lighting effects can be selected and applied to your mouse lighting as a whole, such as spectrum lighting, breathing etc. Select your desired effect and their corresponding properties (such as color) from the bottom area of this tab.

	Name	Description	How to set up
	Breathing	The lighting fades in and out of the selected color(s)	Select up to 2 colors or randomize
	Reactive	The LEDs will light up when you click any of the mouse buttons	Select the color and the length of time for the LED to remain lit
	Spectrum cycling	The LEDs will cycle between 16.8 million colors indefinitely	No further customization required
	Static	The LEDs will remain lit in the selected color	Select a color
	Wave	The lighting will scroll in the direction selected with a default spectrum of colors	Select either front-to-back or back-to-front wave direction

CALIBRATION TAB

The Calibration Tab allows you to optimize your Razer Precision Sensor to any mousing surface for better tracking. To use this feature, you must click ENABLE SURFACE CALIBRATION.

The LIFTOFF RANGE allows you to set the distance in which the sensor stops tracking as it is being lifted away from its mousing surface. To use this feature, you must first activate SURFACE CALIBRATION then choose an appropriate mousing surface.

Razer Mouse Mats

The Razer Lancehead is 'tuned' or optimized especially for Razer mouse mats. This means that the sensor has been tested extensively to confirm that the Razer Lancehead reads and tracks best when paired with Razer mouse mats.

If you are using a Razer mouse mat, click the SELECT A MAT button to access the Razer Mats submenu. This menu showcases an extensive list of Razer-branded mouse mats. Select the appropriate mouse mat from the list; then choose between SPEED or CONTROL if applicable.

If you wish to learn more about a particular mouse mat or if you wish to purchase a Razer mouse mat, you may do so by clicking the FIND OUT MORE button.

Other Mousing Surfaces

If you are using a non-Razer mouse mat or a non-standard mousing surface, select OTHERS then

ADDMAT

button to access the manual calibration submenu.

This submenu enables you to manually adjust the Razer Precision Sensor to suit any mousing surface.

To begin calibrating the sensor, click the CALIBRATE button. After clicking the button, Razer Synapse will begin tuning the sensor. Please avoid moving the Razer Lancehead during this time.

Once the Razer Precision Sensor is ready, click the left mouse button to start the process. Move the mouse across your entire mousing surface in a zigzag pattern as shown on the screen guide.

When you have moved through your entire mousing surface, click the left mouse button. This will bring you back to the manual calibration submenu which contains new information regarding your mousing surface. There are also other options available in this section such as adding a new mouse

mat setting by clicking the + button, deleting the currently selected mouse mat setting by clicking the button or duplicating the currently selected mouse mat setting by clicking the button.

POWER TAB

The Power Tab allows you to manage your device's energy consumption when running on batteries. You can set your device to enter sleep mode when it has been idle for a certain amount of time. The Power Tab also allows you to be notified when the device's power is at a certain level.

MACROS TAB

The Macros Tab allows you to create a series of precise keystrokes and button presses. This tab also allows you to have numerous macros and extremely long macro commands at your disposal.

The Macro section works similarly to Profile wherein you can rename a macro by typing on the field below MACRO NAME. There are also other options available in the macro section such as creating a

new macro by clicking the + button and deleting the current macro by clicking the

button. The

button allows you to Copy, Import, and Export macros. To create a

. button and all your keystrokes and button presses . When you are done recording your macro

macro command, simply click the

will automatically register on the macro screen. When you are done recording your macro

button to end the session.

The Macro section allows you to input the delay in-between commands. In RECORD DELAY the delay in-between commands are registered as how it is entered. The DEFAULT DELAY uses a predefined time (expressed in seconds) as the delay. And NO DELAY omits all the pauses in between keystrokes and button presses.

Note: You may use up to three decimal places when inserting values on the seconds (sec) field.

Once you have recorded a macro, you may edit the commands you have entered by selecting each command on the macro screen. Each keystroke or button press is arranged sequentially with the first command shown at the top of the screen.

The button allows you to edit a particular command and the button enables you to delete a command. The and buttons gives you the option to move the command up or down. The INSERT button allows you to put in additional keystrokes, button presses or time delays either before or after the selected command.

Once you have pressed the INSERT button, a new display window will appear beside the list of macro commands. The dropdown menu on this window allows you to choose a keystroke or a delay to be added in before or after the highlighted macro command.

You may add in a new set of macro commands by clicking the RECORD button on the keystroke menu; or input time delays on the duration field using the delay menu.

CHROMAPPS TAB

The Chroma Apps Tab allows 3^rd party apps to access your Chroma-enabled devices and unlock additional features when using particular games or applications.

SETTINGS TAB

To enable the Chroma Apps function, click ON and visit razerzone.com/chroma-workshop to download an app.

APPSLISTTAB

The Apps list is where all your Chroma apps are listed. From this tab you can view additional information regarding a particular Chroma app by double-clicking it on the list or selecting the

Chroma app and clicking. You can also rearrange the list using drag-and-drop or by clicking

You may also disable the Chroma app by right-clicking on the app from the list and click Disable'...

STATS & HEATMAPS

Note: The images shown here are for reference only and may differ from the actual device.

Stats & Heatmaps help you analyze your gameplay by tracking your in-game mouse clicks, mouse movement and keyboard usage and visualizing it in form of heatmap overlays. This function is disabled by default. To enable this function, click the notification icon next to your user name in the Razer Synapse window and select "Enable Stats & Heatmaps".

Confirm to enable the function in the dialog box that appears. Return to Razer Synapse and a new "STATS" tab will be available. Simply click the tab to open the function window.

GAMES LIST

Stats & Heatmaps work by tracking the usage of all supported devices for each game. When the feature is enabled, it automatically scans your system for installed games and adds them to the

Games List located on the left side of the screen. Click to show or hide the Games List.

From this list, you can add more games that have not been automatically detected, using the + button, edit games with the button or re-scan your system with the button to search for newly installed games.

STATS TAB

By default, the Stats Tab shows you the overall statistics of all your Razer devices for all games and all time. You can select a specific game via the game list on the left side, change the time period using the SHOWING dropdown menu, or the Razer device using the DEVICES dropdown menu.

HEATMAPS TAB

Heatmaps Tab shows detailed information about your Razer device's in-game usage. This includes:

• The Mouse Clicks tab, a heat map showing the frequency of mouse clicks on different spots of your screen.

• The Mouse Movement tab which shows the movement of your mouse cursor during game play. This tab also displays the locations on screen where your mouse cursor stops in the form of white dots. The longer your cursor hovers at that spot, the larger the dot.

Mouse heatmaps can be overlayed on game screenshots.

Editing the Heatmap Image

Click to change the background image and/or transparency of the heatmap overlay

Here you can also adjust the transparency of the heatmap overlay on the background image.

Click to save the changes or to exit without saving.

Social Media

You can share your heatmap image on social media networks such as Facebook or Twitter directly from Razer Synapse.

From the HEATMAPS tab, click the SHARE button on the bottom right of the screen. You will be prompted to login to the selected social media using an existing account if you have not already done so.

You can also login to your social media accounts first from the " SETTINGS" screen. From the Stats

& Heatmaps window, click. Select the "ACCOUNTS" tab. Click CONNECT next to the social media network you wish to sync with. Enter your login details and wait for the connection to complete.

8. SAFETY AND MAINTENANCE

SAFETY GUIDELINES

In order to achieve maximum safety while using your Razer Lancehead, we suggest that you adopt the following guidelines:

Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to Razersupport.com for support. Do not attempt to service or fix the device yourself at any time.

Do not take apart the device (doing so will void your warranty) and do not attempt to operate it under abnormal current loads.

Keep the device away from liquid, humidity or moisture. Operate the device only within the specific temperature range of 0^ ( 32^ ) to 40^ ( 104^ ). Should the temperature exceed this range, unplug and/or switch off the device in order to let the temperature stabilize to an optimal level.

COMFORT

Research has shown that long periods of repetitive motion, improper positioning of your computer peripherals, incorrect body position, and poor habits may be associated with physical discomfort and injury to nerves, tendons, and muscles. Below are some guidelines to avoid injury and ensure optimum comfort while using your Razer Lancehead.

• Position your keyboard and monitor directly in front of you with your mouse next to it. Place your elbows next to your side, not too far away and your keyboard within easy reach.
• Adjust the height of your chair and table so that the keyboard and mouse are at or below elbow-height.
• Keep your feet well supported, posture straight and your shoulders relaxed.
• During gameplay, relax your wrist and keep it straight. If you do the same tasks with your hands repeatedly, try not to bend, extend or twist your hands for long periods.
• Do not rest your wrists on hard surfaces for long periods. Use a wrist rest to support your wrist while gaming.
• Customize the keys on your keyboard to suit your style of gaming in order to minimize repetitive or awkward motions while gaming.
• Do not sit in the same position all day. Get up, step away from your desk and do exercises to stretch your arms, shoulders, neck and legs.

If you should experience any physical discomfort while using your mouse, such as pain, numbness, or tingling in your hands, wrists, elbows, shoulders, neck or back, please consult a qualified medical doctor immediately.

MAINTENANCE AND USE

The Razer Lancehead requires minimum maintenance to keep it in optimum condition. Once a month we recommend you unplug the device from the computer and clean it using a soft cloth or cotton swab with a bit of warm water to prevent dirt buildup. Do not use soap or harsh cleaning agents.

To get the ultimate experience in movement and control, we highly recommend a premium mouse mat from Razer. Some surfaces will cause undue wear on the feet requiring constant care and eventual replacement.

Do note that the sensor of the Razer Lancehead is 'tuned' or optimized especially for the Razer mouse mats. This means that the sensor has been tested extensively to confirm that the Razer Lancehead reads and tracks best on Razer mouse mats.

9. LEGALESE

COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION

©2017 Razer Inc. All rights reserved. Razer, the triple-headed snake logo, Razer logo, "For Gamers. By Gamers.", and "Powered by Razer Chroma" logo are trademarks or registered trademarks of Razer Inc. and/or affiliated companies in the United States or other countries. All other trademarks and trade names are the property of their respective owners and other company and product names mentioned herein may be trademarks of their respective companies.

Windows and the Windows logo are trademarks of the Microsoft group of companies.

Mac OS, Mac and the Mac logo are trademarks or registered trademarks of Apple.

Razer Inc. ("Razer") may have copyright, trademarks, trade secrets, patents, patent applications, or other intellectual property rights (whether registered or unregistered) concerning the product in this guide. furnishing of this guide does not give you a license to any such copyright, trademark, patent or other intellectual property right. The Razer Lancehead (the "Product") may differ from pictures whether on packaging or otherwise. Razer assumes no responsibility for such differences or for any errors that may appear. Information contained herein is subject to change without notice.

LIMITED PRODUCT WARRANTY

For the latest and current terms of the Limited Product Warranty, please visit razerzone.com/warranty.

LIMITATION OF LIABILITY

Razer shall in no event be liable for any lost profits, loss of information or data, special, incidental, indirect, punitive or consequential or incidental damages, arising in any way out of distribution of, sale of, resale of, use of, or inability to use the Product. In no event shall Razer's liability exceed the retail purchase price of the Product.

COSTS OF PROCEDURE

For the avoidance of doubt, in no event will Razer be liable for any costs of procurement unless it has been advised of the possibility of such damages, and in no case shall Razer be liable for any costs of procurement liability exceeding the retail purchase price of the Product.

GENERAL

These terms shall be governed by and construed under the laws of the jurisdiction in which the Product was purchased. If any term herein is held to be invalid or unenforceable, then such term (in so far as it is invalid or unenforceable) shall be given no effect and deemed to be excluded without invalidating any of the remaining terms. Razer reserves the right to amend any term at any time without notice.