BACKUP AND RECOVERY 10 SERVER FOR LINUX - Sauvegarde et Récupération ACRONIS - Notice d'utilisation et mode d'emploi gratuit

Type de produit	Logiciel de sauvegarde et de récupération pour serveurs Linux
Caractéristiques techniques principales	Sauvegarde à chaud, sauvegarde incrémentielle, restauration complète ou granulaire
Compatibilités	Compatible avec diverses distributions Linux, y compris Red Hat, SUSE, et Debian
Fonctions principales	Sauvegarde des données, récupération après sinistre, gestion centralisée des sauvegardes
Utilisation	Installation sur serveur Linux pour gérer les sauvegardes et les restaurations de données
Entretien et nettoyage	Vérification régulière des sauvegardes et mise à jour du logiciel
Pièces détachées et réparabilité	Pas de pièces détachées, logiciel uniquement
Sécurité	Chiffrement des données, authentification des utilisateurs, sauvegardes sécurisées
Informations générales utiles	Licence requise pour l'utilisation, support technique disponible

FOIRE AUX QUESTIONS - BACKUP AND RECOVERY 10 SERVER FOR LINUX ACRONIS

Comment installer ACRONIS Backup and Recovery 10 Server for Linux ?

Pour installer ACRONIS Backup and Recovery 10, téléchargez le fichier d'installation depuis le site officiel, puis exécutez le script d'installation en tant qu'utilisateur root. Suivez les instructions à l'écran pour compléter l'installation.

Comment créer une tâche de sauvegarde ?

Ouvrez l'interface de gestion d'ACRONIS, sélectionnez 'Créer une tâche de sauvegarde', choisissez les fichiers ou partitions à sauvegarder, spécifiez l'emplacement de stockage et configurez les options de planification selon vos besoins.

Que faire si la sauvegarde échoue ?

Vérifiez les journaux d'erreur pour identifier le problème. Assurez-vous que l'emplacement de stockage est accessible, que vous avez suffisamment d'espace disque et que les permissions sont correctement configurées.

Comment restaurer des fichiers à partir d'une sauvegarde ?

Accédez à l'interface de gestion, sélectionnez 'Restaurer', choisissez la sauvegarde souhaitée, puis sélectionnez les fichiers ou dossiers à restaurer. Suivez les instructions pour compléter le processus de restauration.

Comment planifier des sauvegardes automatiques ?

Lors de la création d'une tâche de sauvegarde, sélectionnez l'option de planification. Vous pouvez définir la fréquence (quotidienne, hebdomadaire, etc.) et l'heure à laquelle la sauvegarde doit être exécutée.

Comment vérifier l'intégrité des sauvegardes ?

ACRONIS Backup and Recovery permet de vérifier l'intégrité des sauvegardes via l'option 'Vérifier la sauvegarde' dans l'interface utilisateur. Cela garantit que les fichiers sont accessibles et non corrompus.

Est-ce que ACRONIS Backup and Recovery 10 prend en charge la sauvegarde sur le cloud ?

Oui, ACRONIS Backup and Recovery 10 prend en charge la sauvegarde vers des solutions de stockage cloud compatibles. Assurez-vous de configurer correctement les paramètres de connexion au cloud dans l'interface.

Comment mettre à jour ACRONIS Backup and Recovery ?

Pour mettre à jour ACRONIS, vérifiez les mises à jour disponibles via l'interface utilisateur. Suivez les instructions pour télécharger et appliquer la mise à jour. Assurez-vous de sauvegarder vos données avant de procéder.

Comment obtenir de l'aide technique pour ACRONIS ?

Vous pouvez contacter le support technique d'ACRONIS via leur site web ou consulter la base de connaissances en ligne pour des guides et des solutions aux problèmes courants.

MODE D'EMPLOI BACKUP AND RECOVERY 10 SERVER FOR LINUX ACRONIS

Acronis® Backup & Recovery™ 10 Server for Linux

Quick Start Guide

Table of contents

1 Supported operating systems. 3
2 What you need to get started. 3
3 Installing and starting to use the product. 3

3.1 Installation 4
3.2 Starting Acronis Backup & Recovery 10. 4
3.3 Backing up a volume 4
3.4 Recovering files from a volume backup 5

4 What to read next. 5

This document describes how to install and start using Acronis Backup & Recovery 10 Server for Linux.

1 Supported operating systems

Linux with kernel 2.4.18 or later (including 2.6.x kernels) and glibc 2.3.2 or later
Various Linux distributions, including:

Red Hat Enterprise Linux 4 and 5
CentOS 4 and 5
- Fedora 9 and 10
- Ubuntu 8.10 (Intrepid Ibex), 9.04 (Jaunty Jackalope) and 9.10 (Karmic Koala)
Debian 4 (Lenny) and 5 (Etch)
SUSE Linux Enterprise Server 10
openSUSE
Asianux

• x64 versions of the above Linux distributions and other Linux distributions are also supported. The agent for Linux is in fact a 32-bit executable. For authentication, the agent uses system libraries, 32-bit versions of which are not always installed by default with 64-bit distributions. When using the agent on a 64-bit RedHat based distribution, such as RHEL, CentOS, Fedora or Scientific Linux, make sure that the following 32-bit packages are installed in the system:

pam.i386

libselinux.i386

libsepol.i386

These packages should be available in the repository of your Linux distribution.

2 What you need to get started

Make sure that you have:

A machine running one of the supported Linux distributions, with at least 512 MB of physical memory.
A license key for the product.
- The installation file, which you can download from the product download Web page http://www.acronis.com/enterprise/download/. To download the installation file, sign in to your Acronis account (create it if you do not have one). Use this link regardless of whether you have a trial or a full license key.

3 Installing and starting to use the product

The following steps will guide you through the installation and basic use of Acronis Backup & Recovery 10.

3.1 Installation

In this step, you will install two main components of Acronis Backup & Recovery 10: the agent to back up and recover data, and the management console to create and manage the tasks that the agent should perform.

Before the installation, assign the attribute Executable to the setup file.

You can choose between the interactive and unattended installation modes. In the unattended mode the installation will proceed without asking for interaction, such as typing the license key or selecting the Next buttons.

Unattended mode

The following command installs Acronis Backup & Recovery 10 Agent for Linux and Acronis Backup & Recovery 10 Management Console in the unattended mode and uses the license key 12345-7890-ABCDE:

./AcronisBackupRecoveryServerLinux.i686 -a -i BackupAndRecoveryAgent,ManagementConsole -l 12345-67890-ABCDE 

Default interactive mode

1. Run the AcronisBackupRecoveryServerLinux.i686 installation file.
2. Accept the terms of the license agreement.
3. Select Enter the license key, and then type your Acronis Backup & Recovery 10 license key.
4. When prompted to select the edition to install, select Next.
5. Select the components that you want to install (Acronis Backup & Recovery 10 Management Console and Acronis Backup & Recovery 10 Agent for Linux).

Note: You need Acronis Backup & Recovery 10 Upgrade Tool only if you are upgrading from Acronis True Image Echo. 

1. The setup program may ask you to compile the SnapAPI module for your Linux kernel. Select Continue to compile the module now (recommended), or select Skip to compile it manually later.

Note: If the setup program could not compile the necessary module for your Linux distribution, or if you have chosen to compile the module manually later, please refer to the file: /usr/lib/Acronis/BackupAndRecovery/HOWTO.INSTALL 

3.2 Starting Acronis Backup & Recovery 10

To begin working with the product

1. Log in as root user.
2. Start the management console with the following command: /usr/sbin/acronis(Console)

3.3 Backing up a volume

In this step, you will perform full backup of a volume and save the archive to a folder you specify.

Assume there are two volumes (/dev/sda1 mounted as /boot, and /dev/sda2 mounted as / backups) on your hard disk and you need to back up the first volume (/boot) to the second (/ backups).

1. In the management console, click Back up.

2. Under What to back up, in Items to back up, click Change and then select sda1 (/boot).

3. Under Where to back up, in Archive, click Change and then select the /backups folder.
4. Click OK to start the backup.

Details. You are taken to the Backup plans and tasks view with the backup plan pre-selected. The Information pane displays the plan's execution state: Running. To view the backup task progress, expand the backup plan in the Information pane.

3.4 Recovering files from a volume backup

In this step, you will recover files and folders from the backup you previously created. Using a similar procedure, you can recover an entire volume from a disk or a volume backup.

1. In the management console, click Recover.
2. Under What to recover, in Archive, click Change and then select the archive.
3. In Data type, select Files.
4. In Content, click Change, and then browse the contents of the backup to select the files and folders that you want to recover.
5. Under Where to recover, in Destination, click Change. Select New location and then specify the folder to recover the files to. Or you can select this folder from the folder tree.

Tip. By default, the program recovers files to the location from which they were backed up. This may require a reboot if some of the files are locked by the operating system.

1. Click OK to immediately start the recovery.

4 What to read next

The Quick Start Guide gives you an idea of the product usage and enables immediate "field testing". For more information about using Acronis Backup & Recovery 10, please refer to the User's Guide and the help.

• When in the management console, access the context-sensitive help system with the F1 key or by clicking the question-mark button where available.
• Read the Basic concepts section to be sure you have an understanding of the basic notions used in Acronis Backup & Recovery 10 graphical user interface.
  If you come across an unknown term like vault, or cleanup, please refer to the Glossary.
• The Understanding Acronis Backup & Recovery 10 section contains an explanation of underlying technologies such as the GFS and Tower of Hanoi backup schemes.