BAC14 - Ventilateur BIONAIRE - Notice d'utilisation et mode d'emploi gratuit

Type d'appareil	Ventilateur haute vélocité
Fonction principale	Circulation d'air
Vitesse	Plusieurs vitesses réglables
Type de montage	Sur pied ou posé
Alimentation	Électrique
Consommation électrique	Non précisé
Matériau des pales	Metal
Protection des pales	Grille de sécurité
Poids	Non précisé
Dimensions	Non précisées
Niveau sonore	Non précisé
Utilisation recommandée	Usage intérieur
Normes de sécurité	CE
Garantie	Non précisée
Couleur	Metal argenté

FOIRE AUX QUESTIONS - BAC14 BIONAIRE

Comment utiliser le BIONAIRE BAC14 pour la première fois ?

Avant de l'utiliser, assurez-vous de remplir le réservoir d'eau jusqu'à la ligne de remplissage. Branchez l'appareil, sélectionnez la vitesse souhaitée et appuyez sur le bouton d'alimentation.

Que faire si le BIONAIRE BAC14 ne fonctionne pas ?

Vérifiez que l'appareil est bien branché et que le réservoir d'eau est rempli. Assurez-vous également que le bouton d'alimentation est en position 'on'.

Comment nettoyer le BIONAIRE BAC14 ?

Débranchez l'appareil et videz le réservoir. Utilisez un chiffon doux et humide pour nettoyer l'extérieur. Pour l'intérieur, utilisez une solution de vinaigre et d'eau pour éliminer les dépôts de calcaire.

Quel type d'eau dois-je utiliser avec le BIONAIRE BAC14 ?

Il est recommandé d'utiliser de l'eau distillée pour éviter l'accumulation de minéraux qui pourraient endommager l'appareil.

Le BIONAIRE BAC14 fait-il du bruit ?

Un léger bruit peut être normal pendant le fonctionnement. Si le bruit devient excessif, vérifiez que le réservoir est correctement installé et que l'appareil est sur une surface stable.

Comment régler le niveau d'humidité avec le BIONAIRE BAC14 ?

Utilisez le panneau de contrôle pour ajuster la vitesse du ventilateur. Une vitesse plus élevée augmentera le niveau d'humidité dans la pièce.

Quelle est la superficie couverte par le BIONAIRE BAC14 ?

Le BIONAIRE BAC14 est conçu pour couvrir des pièces jusqu'à 45 m².

Que faire si l'humidificateur fuit ?

Vérifiez que le réservoir est correctement installé. Inspectez également les joints et les tuyaux pour toute fissure ou dommage.

À quelle fréquence dois-je changer l'eau du réservoir ?

Il est recommandé de changer l'eau tous les jours pour maintenir une bonne qualité d'humidité et éviter la prolifération de bactéries.

Le BIONAIRE BAC14 est-il équipé d'un filtre ?

Oui, le BIONAIRE BAC14 est équipé d'un filtre qui doit être remplacé régulièrement selon les recommandations du fabricant.

MODE D'EMPLOI BAC14 BIONAIRE

BIONAIRE

Holmes Products (Europe) Ltd

1 Francis Grove

London SW19 4DT

England

Fax: [phone]

Email: [e-mail]

Website address: www.bionaire.com

UK - Free phone Customer Service Helpline – 0800 052 3615

BIONAIRE

High Velocity

Air Circulator

BAC14

BAC19

U.K. and IRELAND

PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be taken including the following:

• Use the fan only for purposes described in the instruction manual.
• To protect against electrical shock, do not immerse the fan, plug or mains cable in water or spray with liquids.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from the electrical outlet when not in use, when moving the fan from one location to another before putting on or taking off parts and before cleaning.
• Avoid contact with any moving parts.
• Do not operate in the presence of explosives and/or flammable fumes.
• Do not place the fan or any parts near an open flame, cooking or other heating appliance.
• Do not operate any appliance with a damaged mains cable, plug, after the appliance malfunctions, or has been dropped/damaged in any manner.
• The use of attachments not recommended or sold by the appliance manufacturer may cause hazards.
• Do not let the mains cable hang over the edge of a table or counter, or come into contact with hot surfaces.
• To disconnect from the electrical supply, grip the plug and pull from the wall outlet. DO NOT pull on the mains cable.
  Always use on a dry, level surface.
• Do not operate without the fan grills properly in place.
• This product is intended for household use ONLY and not for commercial or industrial applications.
• Should the appliance stop working, first check the fuse in the plug (UK only) or fuse/circuit breaker at the distribution board is operating, before contacting the manufacturer or service agent.
• If the supply cord or plug is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid hazard.
• The appliance contains no user serviceable parts and should the product suffer damage or breakdown it must be returned to the manufacturer or its service agent.
• Do not use outdoors.

OPERATING INSTRUCTIONS

1. Set fan on a dry, level surface.
2. Before you plug in the cord, please make sure the speed control is in the Off position.

Before plugging in the unit, fully unwind the power cord. This high quality air circulator features a multi-speed air flow selector switch, allows you to select the desired amount of air and its velocity. Air flow settings are as follows:

I = Low II = Medium III = High 0 = Off

BIONAIRE Air Circulators can be used alone or in conjunction with an air conditioning unit to circulate the cooled air or to force the air into other rooms. During summer months, the portable BIONAIRE Air Circulators can be used as a hassock fan to pick up the cooled air at floor level and circulate the cool air throughout the entire room.

During the winter months your BIONAIRE® Air Circulators may be used to enhance the distribution of heated air in your home.

CLEANING AND MAINTENANCE

Always unplug the fan before cleaning.
- Do not allow water to drip on or into the fan motor housing.

FAN STORAGE

When storing your fan in the off season, it is important to keep it in a safe dry location. It is important to protect the fan from dust. WE STRONGLY RECOMMEND USING THE ORIGINAL BOX FROM PURCHASE.

FITTING A REPLACEMENT PLUG FOR U.K. AND IRELAND ONLY.

If the plug is not suitable for the socket outlets in your home, it can be removed and replaced by a plug of the correct type. Please refer to "Installation of a plug" below.

INSTALLATION OF A PLUG APPLICABLE TO U.K. AND IRELAND

WARNING - THIS APPLIANCE MUST BE EARTHED

The wires in the mains lead are coloured as such:

GREEN AND YELLOW - EARTH

BROWN - LIVE

BLUE -NEUTRAL

Please note that the colour of these mains wires may not correspond with the colour markings that identify the terminals in your plug.

Please proceed as follows:

The wire which is coloured GREEN AND YELLOW must be connected to the terminal which is marked with the letter 'E' or by the earth symbol ⑤ or GREEN AND YELLOW.

The BROWN coloured wire must be connected to the terminal, which is marked with the letter "L" or is coloured RED.

The BLUE coloured wire must be connected to the terminal, which is marked with the letter "N" or is coloured BLACK.

GUARANTEE

PLEASE KEEP YOUR RECEIPT AS THIS WILL BE REQUIRED FOR ANY CLAIMS UNDER THIS GUARANTEE.

• This product is guaranteed for 5 years.
• In the unlikely event of breakdown, please take it back to the place of purchase, with your till receipt and a copy of this guarantee.

• The rights and benefits under this guarantee are additional to your statutory rights which are not affected by this guarantee.
  Holmes Products Europe undertakes within the specific period, to repair or replace free of charge, any part of the appliance found to be defective provided that:

• We are promptly informed of the defect.

• The appliance has not been altered in any way or subjected to misuse or repair by a person other than a person authorised by Holmes Products Europe.
• No rights are given under this guarantee to a person acquiring the appliance second hand or for commercial or communal uses
• Any repaired or replaced appliance will be guaranteed on these terms for the remaining portion of the guarantee.

THIS PRODUCT IS MANUFACTURED TO COMPLY WITH THE E.E.C. DIRECTIVES 73/23/EEC, 89/336/EEC AND 98/37/EEC.

Waste electrical products should not be disposed of with Household waste. Please recycle where facilities exist.

Check on the following website for further recycling and WEEE information:

www.bionaire.com or e-mail

[e-mail]

NOTE: If the terminals in the plug are not marked or if you are unsure or in doubt about the installation of the plug please contact a qualified electrician.

If a 13A 3-pin plug is fitted, it must be an ASTA approved plug, conforming to BS1363 standard.

Replacement 3A fuses must be BSI or ASTA BS1362 approved.