GC800 - Carte graphique SWEEX - Notice d'utilisation et mode d'emploi gratuit
Retrouvez gratuitement la notice de l'appareil GC800 SWEEX au format PDF.
| Type d'appareil | Ordinateur de bureau |
| Installation matérielle | Carte graphique PCIe |
| Alimentation requise | Déconnectée lors de l'installation |
| Précautions électrostatiques | Décharge recommandée avant manipulation |
| Emplacement de la carte | Slot PCIe libre |
| Fixation de la carte | Fixation sécurisée requise |
| Retrait des périphériques | Imprimante et moniteur à débrancher |
| Outils recommandés | Tournevis non magnétique |
| Protection des composants | Retrait de la plaque métallique de protection |
| Type de slot PCIe | Non précisé |
| Compatibilité | Non précisée |
| Manuel utilisateur | Consulter pour emplacement PCIe |
| Précautions d'installation | Éviter contact direct avec points de contact |
| État du PC | Éteint et débranché |
| Type de carte | Carte graphique |
FOIRE AUX QUESTIONS - GC800 SWEEX
Questions des utilisateurs sur GC800 SWEEX
0 question sur cet appareil. Repondez a celles que vous connaissez ou posez la votre.
Poser une nouvelle question sur cet appareil
Téléchargez la notice de votre Carte graphique au format PDF gratuitement ! Retrouvez votre notice GC800 - SWEEX et reprennez votre appareil électronique en main. Sur cette page sont publiés tous les documents nécessaires à l'utilisation de votre appareil GC800 de la marque SWEEX.
MODE D'EMPLOI GC800 SWEEX
Quick Install Guide for SweeX PCIe graphic cards
Hardware Installation
- Make sure the computer is turned off and that there is no power connected.
- Also remove the printer and monitor cable, because these have their own power supply.
- Now unscrew the computer casing.
- Make sure that you undo yourself of possible static electricity. This can be done by grabbing a (naked) central heating pipe or an unpainted water pipe. Pay attention not to use a magnetic screwdriver. Briefly touch the iron frame of the PC casing. Avoid direct contact with the contact points of the PCIe slot and contact points on the graphics card.
- Locate a free PCIe slot and remove the metal protection plate that is in the computer casing for the intended slot. Consult the manual of your computer to find the PCIe slot.

Place the card in the PCIe slot. (Your PCIe slot may look different)

Make sure the card is securely fastened
- When possible fasten the card with screws so it can not move.
- When the card is mounted successfully, check if the other cards are still fitted properly in their expansion slot. It can happen that when a new card is added the other cards rise a little with as result that the card, or even the entire computer, may not work.
- Close the computer casing and reconnect all cables properly.
- Turn on the computer.
Software installation
On the CD-ROM we place the most recent drivers that are available whilst making this CD-ROM. It is possible that when you buy this product new drivers are available for your card. The most recent drivers can be found on www.nvidia.com/drivers.
After starting the computer the graphics card will automatically be detected. Windows will ask for drivers of the card. Choose cancel installation.
Place the Sweex CD-ROM in the computer. The CD-ROM will start automatically and display a menu. Choose install drivers.
Warranty
For all Sweeex products a warranty period of 2 years applies. We do not give support or warranty on supplied software, rechargeable batteries and batteries. Transaction of warranty only takes place at the sales point where the product is bought.
All brand names and associated rights mentioned in this manual are and stay property of the rightful owner.