X2 - Casque Bluetooth BLUETREK - Notice d'utilisation et mode d'emploi gratuit

Type de produit	Casque Bluetooth
Marque	BLUETREK
Modèle	X2
Alimentation	Batterie rechargeable, charge via adaptateur secteur (non inclus). Charge initiale 8 h, charge normale 2 h 40 min.
Connectivité	Bluetooth 1.2, profils Headset et Hands-Free
Fonctions principales	Appels mains-libres, commande vocale (selon téléphone), réglage volume, muter le micro, transfert d'appel, rejet d'appel, recomposition du dernier numéro
Boutons	TALK (principal), VOL+, VOL-
Indicateur lumineux	Rouge (charge), bleu (marche), rouge/bleu alterné (appairage)
Température d'utilisation	0 °C à 40 °C
Étanchéité	Protégé contre les éclaboussures (ne pas immerger)
Entretien et nettoyage	Essuyer avec un chiffon sec. Éviter l'humidité et les liquides.
Sécurité	Ne pas exposer à des températures extrêmes, au feu ou à l'eau. Ne pas démonter. Tenir hors de portée des enfants.
Réparabilité	Entretien et réparation uniquement par des revendeurs agréés BLUETREK
Conformité	CE, FCC, Industry Canada
Contenu de l'emballage	Casque X2, tour d'oreille petit, crochet d'oreille, chargeur (non précisé dans le manuel)

FOIRE AUX QUESTIONS - X2 BLUETREK

Comment charger le casque BLUETREK X2 pour la première fois ?

Pour la première utilisation, chargez le casque en continu pendant environ 8 heures jusqu'à ce que le voyant rouge s'éteigne. Branchez le chargeur au casque puis sur secteur.

Comment appairer le casque avec un téléphone mobile ?

Placez le casque et le téléphone à moins de 0,3 mètre. Éteignez le casque, puis maintenez enfoncé le bouton TALK pendant environ 7 secondes jusqu'à ce que le voyant clignote en rouge et bleu. Sur le téléphone, activez le mode découverte Bluetooth et sélectionnez 'BLUETREK X2'. Le code PIN est 0000.

Comment allumer et éteindre le casque ?

Pour allumer, maintenez le bouton TALK enfoncé environ 2 secondes jusqu'à ce que le voyant bleu s'allume et que vous entendiez une double tonalité. Pour éteindre, maintenez le bouton TALK enfoncé environ 5 secondes jusqu'à ce que le voyant rouge s'allume après des flashs bleus.

Comment répondre à un appel avec le casque ?

Lorsque le casque sonne, appuyez une fois sur le bouton TALK pour prendre l'appel.

Comment régler le volume pendant un appel ?

Pendant un appel actif, appuyez sur le bouton VOL+ pour augmenter le volume et sur VOL- pour le diminuer.

Comment activer le mode muet du microphone ?

Pendant un appel, maintenez enfoncé le bouton VOL+ pendant environ 2 secondes jusqu'à entendre une tonalité périodique. Pour désactiver le muet, appuyez brièvement sur VOL+.

Comment transférer un appel du casque au téléphone ?

Pendant un appel actif, maintenez enfoncé le bouton TALK pendant environ 2 secondes. Cette fonction n'est disponible qu'en profil Hands-Free.

Comment rejeter un appel entrant ?

Lorsque le casque sonne, maintenez enfoncé le bouton TALK pendant environ 2 secondes pour rejeter l'appel.

Que faire si le casque ne s'allume pas ou ne s'appaire pas ?

Essayez d'éteindre et de rallumer le casque et le téléphone. Assurez-vous que le casque est chargé. Si le problème persiste, consultez la section dépannage sur www.bluetrek.com.

Quelles sont les précautions de sécurité importantes ?

N'immergez jamais le casque dans l'eau. Ne l'exposez pas à des températures extrêmes (0-40°C) ou au feu. Ne le démontez pas. Tenez-le hors de portée des enfants. Éteignez-le à bord des avions. Remplacez la batterie conformément aux réglementations locales.

MODE D'EMPLOI X2 BLUETREK

BLUETREK X2 user guide

Thank you for choosing the BLUETREK® X2, we hope you will enjoy the convenience we are bringing to you. The BLUETREK® X2 offers many functions, please read this manual before getting started.

EC-Declaration of Conformity

We, Innovi Technologies Ltd of

31/F China Online Centre,

333 Lockhart Road,

Wan Chai, Hong Kong

declare under our sole responsibility that our product

BLUETREK X2-2

to which this declaration refers is in conformity with the appropriate standards

EN300 328-02

EN301489-17

EN301 489-01

EN50371

EN60950

Following the provisions of Radio and Telecommunications Terminal Equipment directive 1999/5/EC.

February 2006

Guillaume Ponticelli, Director of Development

FCC/ Industry Canada Notice

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

In compliance with Industry Canada regulations, technical specifications have been provided in a declaration of conformity. This does not imply that Industry Canada approved the equipment.

Caution: Changes or modifications to this Bluetooth® headset not expressly approved by the party responsible for compliance could void the user's authority to operate it.

Bluetooth® is a trademark owned by Bluetooth SIG, Inc. and is used by the manufacturer under license.

BEFORE USING YOUR HEADSET FOR THE FIRST TIME

• You must charge it continuously for about 8 hours, until the red indicator light turns off. Please refer to the "Charging the BLUETREK® X2" section of this manual.
• Pair the headset with a mobile phone. Please refer to the "Pairing the BLUETREK® X2" section of this manual.

Introduction

The BLUETREK® X2 headset is a wireless headset based on the Bluetooth® technology. It complies with Bluetooth® 1.2 protocol, supporting Headset and Hands-free profile.

The BLUETREK® X2 headset has 3 buttons:

TALK "button (main button),
1 "VOL+ "button,
1 "VOL-"button.

Charging the BLUETREK X2

Please connect the charger to the headset and to the mains. During the charge, the indicator light is red. The indicator light will turn off when the charge is complete. During subsequent charges, the charging should take approximately 2 hour 40 minutes.

When you hear a light beep in your headset at regular intervals, and the indicator light flashes in red, your headset needs to be recharged.

Important:

• To maximize battery lifetime, it is recommended to recharge your headset to full capacity only when the battery is low, since a battery has a lifetime of about 500 charging cycles.
• If you leave your headset battery empty for an extended period of time, it could excessively discharge the battery. In this case, charge your headset for 10 hours or more until the battery recovers and recharges completely. Only switch on the headset once the red indicator light turns off, indicating the battery has fully recovered.
• Do not let the battery charger remain plugged in the headset for more than 24h.
• The use of any other charger will automatically suspend the warranty.

Pairing the BLUETREK® X2

Before using the BLUETREK® X2 headset, you must pair it with your Bluetooth® mobile phone. Pairing is the process of linking 2 Bluetooth® devices, so that they can communicate.

To initiate pairing:

1. Place the BLUETREK® X2 and your mobile phone within 0.3 meter (1 foot) from each other.
2. Switch on your phone and select its Bluetooth® discover mode (refer to the Bluetooth® mobile phone user manual).
3. When the BLUETREK® X2 is switched off, press and hold the TALK button for about 7 seconds until the indicator light flashes red and blue alternately. And a sound can be heard in the speaker.
4. Once the mobile phone detects the headset, a "BLUETREK X2" message will be displayed. Follow the phone instructions to accept the pairing. The PIN code (or passkey) is 0000, then press "yes" or "ok".

If pairing success, the indicator light will switch to blue and flashes slowly.

If you haven't started the discovery mode within 5 minutes, the headset will switch off. You must then switch on your headset and start the pairing again.

Wearing the BLUETREK® X2

For your convenience, the ear loops and the ear hook of BLUETREK® X2 are designed to be removable and can be worn on either ear. BLUETREK® X2, as packaged, is already with the small ear loop that is specially designed for active outdoor use.

To replace with the ear hook:

Simply unsnap the ear loop from the headset by pulling gently at the base of the ear clamp ring.

The ear hook is made of a soft material which can be shaped to fit your ear. Please refer to the above diagram of how it can be adjusted.

Snap the ear hook onto the headset by applying gentle pressure on the base of the ear clamp ring.

Switching the BLUETREK® X2 ON and OFF

Switching BLUETREK® X2 ON

When your headset is off, press and hold the TALK button for about 2 seconds until the blue indicator light is on. A beep (2 tones) can be heard in the speaker. Release the TALK Button.

To check if your headset is ON, press once on the TALK button. If the indicator light flashes blue, it means your headset is ON.

Switching BLUETREK® X2 OFF

When your headset is on, press and hold the TALK button for about 5 seconds until the red indicator light is on after the quick blue flashes. A beep (2 tones) can be heard in the speaker then release the TALK Button.

Making a call

*Mobile phone with voice recognition

Make sure the voice recognition function on your mobile is activated and your voice tags have been recorded with the phone. To enter these, please refer to your phone's manual

When there is no incoming or active call, press once on the TALK button
Wait for the audio signal sent by the mobile phone (generally a short tone).
Speak the name of person you wish to call.

Mobile without voice recognition

• Make sure both the headset and the mobile phone are ON and in stand-by mode.
• Dial the number on the phone keypad, after approximately 2 seconds the audio connection will be established.

*This function may not be available on some phones, please refer to the trouble shooting frequent asked questions in our website: www.bluetrek.com. to find out more.

Answering a call

When the headset rings, press once on the TALK button to take the call.

Ending a call

Press once on the TALK button to end an active call.

Adjusting the volume

To increase the volume during an active call, press the "VOL+" button on the headset.

To decrease the volume during an active call, press the "VOL-" button on the headset.

Muting the microphone

To mute the microphone during an active call

During an active call, press and hold the VOL+ button for approximately 2 seconds. A periodic tone can be heard in the speaker when the microphone is muted.

To end the mute function

When the microphone is muted quickly press the VOL+ button on the BLUETREK® X2. The periodic tone will end.

Transferring a call from BLUETREK® X2 to the mobile phone

During an active call, press the TALK button for about 2 seconds.

(This function only works in the Hands-Free Profile.)

In the Headset profile, you can simply turn off your headset.

Transferring a call from the mobile phone to the BLUETREK® X2

To transfer the call back to the headset, use the menu option on your phone.

This function may not be available, depending on your phone's functionality.

Additional features with some phones

Rejecting a call

When the headset rings, press the TALK button for about 2 seconds.

Redial the last number

When there is no incoming or active call, press the TALK button for about 2 seconds until you hear a beep.

Troubleshooting guide

The first thing you should do when encountering a problem that you cannot solve with this manual, is to switch off your headset and your mobile phone, and switch them on again.

To find out more, please refer to the trouble shooting frequent asked questions in our website: www.bluetrek.com.

Guidelines for safe use

Read those guidelines before using your headset.

• BLUETREK® X2 is protected against splashing water from all direction, which means that your headset can function with water falls. Nonetheless, precipitation, humidity and all types of liquid or moisture may contain minerals that will corrode electronic circuits. Therefore, if your headset does get wet, dry it completely as soon as possible.
  Warning: never immerse your headset under water.
• Do not drop or try to alter the shape of your headset.
• Do not expose your headset to extreme temperatures. Temperature range: 0-40C.
• Do not expose your headset to fire or open flames.
• Do not try to disassemble your headset. Service and Maintenance can only be performed by authorized BLUETREK® dealers.
• Do not let children play with your headset, since it contains small parts that could become detached and create a choking hazard.
• Check the regulation in your area if you plan to use your headset while driving.
• Turn off your headset before boarding an airplane.

CAUTION: Danger of explosion if battery is incorrectly replaced. Dispose of batteries according to local regulations. Do not dispose as household waste.