DIMAGE 2300 SOFTWARE - Logiciel de traitement d'image KONICA MINOLTA - Notice d'utilisation et mode d'emploi gratuit

Type d'appareil	Imprimante
Connexion	USB
Système d'exploitation compatible	Windows 98
Technologie d'impression	Non précisé
Résolution d'impression	Non précisé
Vitesse d'impression	Non précisé
Format papier supporté	Non précisé
Capacité d'alimentation papier	Non précisé
Couleur d'impression	Non précisé
Dimensions	Non précisé
Poids	Non précisé
Alimentation	Non précisé
Compatibilité logicielle	Logiciel fourni pour Windows 98
Interface utilisateur	Non précisé
Fonctions supplémentaires	Non précisé

FOIRE AUX QUESTIONS - DIMAGE 2300 SOFTWARE KONICA MINOLTA

Comment installer le logiciel KONICA MINOLTA DIMAGE 2300 ?

Pour installer le logiciel, téléchargez le fichier d'installation depuis le site officiel. Double-cliquez sur le fichier téléchargé et suivez les instructions à l'écran.

Le logiciel ne reconnaît pas mon appareil photo, que faire ?

Assurez-vous que votre appareil photo est correctement connecté à l'ordinateur via USB et qu'il est allumé. Essayez de redémarrer le logiciel et de reconnecter l'appareil.

Comment résoudre un problème de plantage du logiciel ?

Vérifiez si votre système d'exploitation est à jour et si les pilotes de votre appareil sont installés. Si le problème persiste, essayez de réinstaller le logiciel.

Le logiciel affiche un message d'erreur lors de l'importation des images, que faire ?

Vérifiez que les fichiers d'image ne sont pas corrompus et qu'ils sont compatibles avec le logiciel. Essayez d'importer une autre image pour voir si le problème persiste.

Comment mettre à jour le logiciel KONICA MINOLTA DIMAGE 2300 ?

Rendez-vous sur le site officiel de KONICA MINOLTA, recherchez la section des mises à jour et téléchargez la dernière version du logiciel. Installez-la en suivant les instructions.

Puis-je utiliser le logiciel sur un autre système d'exploitation ?

Le logiciel KONICA MINOLTA DIMAGE 2300 est principalement conçu pour Windows. Pour d'autres systèmes d'exploitation, vous pouvez essayer d'utiliser un logiciel de virtualisation.

Comment désinstaller le logiciel ?

Allez dans le Panneau de configuration de votre ordinateur, sélectionnez 'Programmes' puis 'Programmes et fonctionnalités'. Trouvez KONICA MINOLTA DIMAGE 2300 dans la liste, sélectionnez-le et cliquez sur 'Désinstaller'.

Y a-t-il un support technique disponible pour ce logiciel ?

Oui, vous pouvez contacter le support technique de KONICA MINOLTA via leur site web pour toute assistance supplémentaire concernant le logiciel.

MODE D'EMPLOI DIMAGE 2300 SOFTWARE KONICA MINOLTA

MINOLTA

Dimâge 2300

E SOFTWARE INSTRUCTION MANUAL

For Windows®98

For USB Connection

This manual does not provide instructions for the basic operation of personal computers, or the basic operation of Windows® operating system. Please refer to the manual that came with your computer for information on the above mentioned topics.

• Microsoft® and Windows® are registered trademarks in the United States and other countries of Microsoft Corporation.
• The official name of Windows® is Microsoft® Windows® Operating System.
• Pentium® is a registered trademark of Intel Corporation.
• Other company and product names are the trademark or registered trademark of their respective owners.

BEFORE YOU BEGIN

USER REGISTRATION 4

TERMS USED IN THIS MANUAL. 5

SYSTEM REQUIREMENTS 6

INSTALLING THE SOFTWARE 8

INSTALLING THE MGI PHOTOSUITE SE 10

CONNECTING THE CAMERA TO THE PC 11

LAUNCHING THE SOFTWARE

LAUNCHING THE UTILITY SOFTWARE 14

LAUNCHING THE TWAIN DRIVER 16

USING THE SOFTWARE

COPYING IMAGE FILES TO THE HARD DRIVE 21

ACQUIRING IMAGES INTO THE APPLICATION 21

DELETING IMAGE FROM THE CF CARD. 26

VIEWING IMAGE FILE PROPERTIES 28

QUITTING THE UTILITY SOFTWARE 30

QUITTING THE TWAIN DRIVER 31

USER REGISTRATION

Please register this software before you begin using it. Complete both sides of the enclosed user registration card, detach along the perforated line, and mail. No postage is necessary.

Persons who register their software are recognised as official users, and receive technical support as well as software upgrade and other new product information.

• Please be aware that you will not receive any notification of registration from Minolta.
• The information contained on your registration card is used exclusively by Minolta for customer service and product development. The information you provide will be kept private and confidential.

TERMS USED IN THIS MANUAL

• This manual assumes that your computer's operating system (Windows®98) as well as other necessary software such as device drivers have been installed, and are operating properly.
• This manual assumes the use of a two-button, right-handed mouse for Windows®. The terms 'click' and 'double-click' refer to a single or double click of the left mouse button. The term 'drag' refers to the action of holding down the left mouse button while moving the mouse.

The system requirements for the operation of this software are as shown below:

	IBM PC/AT compatible computers
Computers	IBM PC/AT compatible computers1
CPU	Intel Pentium Processor 90MHz or higher
OS	Windows®98, Windows®98 Second Edition2
RAM	A minimum of 32MB of RAM
Hard Disk Space	80MB or more of free hard disk space for use as workspace
Monitor	VGA (640 x 480) or higher/High Colour (16-bit)
CD-ROM Drive	Required for installation
Interface	USB (Universal Serial Bus)3
Others	TWAIN driver is compatible with Adobe Photoshop Ver. 4.0.1, 5.0.2, and 5.5, Adobe Photoshop LE Ver. 5.0, MGI PhotoSuite SE Ver. 1.0, Paint Shop Pro 5.0, and Corel Photo Paint 8

1 Not including computers built from kits, shop-brands or other computers for which components have been selected and assembled individually.
2 Pre-installed Windows®98/Windows®98 Second Edition only. Windows®98 upgraded from Windows®95 does not be guaranteed.
3 USB (Universal Serial Bus) port that each PC maker guarantees to operate without problem.

Use the following procedure to install Dimâge 2300 software on your computer.

The following explanation refers to the hard disk drive as drive C and the CD-ROM drive as drive D.

1 Turn the computer on to start up Windows®98.
2 Insert the Dimâge 2300 CD-ROM into the CD-ROM drive.

• The Choose Setup Language window opens.

3 Select the language for the installation and click on 'OK'.

• The Dimage 2300 Setup program opens.

• In the event that the DimAge 2300 Setup program does not open automatically, click on the Start button, and then click on Run. Enter D:\Setup.exe in the text box and click on OK.

4 Click on 'Next >'.

• The Select Components window will appear.

Make sure that the checkbox is marked, then click on 'Next >'.

• Setup will begin. After copying files, the building of driver information database will start automatically.
• After building driver information database, the following window will appear.

6 Remove any disks from their drives, then click on 'Finish'.

• The Setup program will complete and Windows® will be restarted.

Use the following procedure to install MGI PhotoSuite SE on your computer.

1 Turn the computer on to start up Windows®98.
2 Insert the MGI PhotoSuite SE CD-ROM into the CD-ROM drive.

After a while, the following screen will appear.

3 Select the language for the installation and click on 'OK'.

• The MGI PhotoSuite SE Setup program opens.

4 Click on 'Next >', then follow the direction on the screen.

Connect the Dimâge 2300 and your personal computer.

Turn the computer on to start up Windows®98.

2 Turn the Function dial of the camera to PC.

3 Move the lens cover slide to

4 Press and hold the display/ENTER button.

• The camera will be turned on and "PC MODE" will appear in the upper-left corner of the camera's LCD monitor.

PC MODE

5 Attach the one end which has wider plug of the USB cable to the Dimâge 2300 USB/Serial connector.

6 Attach the other end of the USB cable to the USB port on the personal computer.

• After connecting the DimAge 2300 to the personal computer, Windows® system will detect the DimAge 2300 as a new hardware (New Hardware Found window will appear), and will install necessary files automatically.

LAUNCHING THE SOFTWARE

Following explanation is on the assumption that the Dimage 2300 has already been connected to the personal computer (see pages 11 to 12).

LAUNCHING THE UTILITY SOFTWARE

Select Start Programs Minolta DimAge 2300 Minolta DimAge 2300 Utility.

• Dimâge 2300 utility main window shown at the right will appear.

If there are a few TIFF files (image files that were taken with SUPER FINE image quality) or too many image files in the CF card, it could take some time the utility software is launched.

For example, 300 image files that were taken with ECONOMY image quality saved in the CF card, will take approx. 5 minutes until the utility software is launched.

LAUNCHING THE TWAIN DRIVER

This example uses MGI PhotoSuite SE as a TWAIN compliant application. The procedure will vary for other applications. See the operating manual for your application.

1 Select Start Programs MGI PhotoSuite SE MGI PhotoSuite SE to launch.

• MGI PhotoSuite SE Activity Guide window shown at the right will appear.

2 Click on 'Get Photos' in the Activity Guide window.

• Get Photos window will appear.

3 Click on 'Digital Camera' in the Get Photos window.

• After a while, Dimâge 2300 utility main window will be opened on the MGI PhotoSuite SE window.

• Dimâge 2300 utility main window will be opened on the MGI PhotoSuite SE window.

When the computer is unable to detect a connection to the Dimâge 2300, the following error message opens.

In such a case, perform the following troubleshooting operations:

1 Click on 'OK' to close the error message window.
2 Check the following:

• Did you turn on the Dimâge 2300?
• Is the USB cable connected properly?
• Has the USB cable separated from a connector?
• Has the USB cable been cut or damaged?
• Did you set the Function dial of the DimAge 2300 to PC?

After verifying that all of the above have been performed properly, try to connect to the Dimâge 2300 again, following the instructions on pages 11 to 12.

USING THE SOFTWARE

COPYING IMAGE FILES TO THE HARD DRIVE

ACQUIRING IMAGES INTO THE APPLICATION

When using Dimâge 2300 Utility software

Copy some or all of the image files saved in the compact flash card to your computer's hard drive or other memory device.

When using TWAIN driver

Acquire some or all of images into the image processing application.

1 Click on the images to be copied or acquired.

• The selected image(s) will be highlighted.
• To select two or more images, press and hold Ctrl (Control) key and click on the images to be copied or acquired.
• To select all the images, click on 'Select All' in the display.

When using the Dimâge 2300 Utility Software:

2 Click on 'Transfer'.

• The Select a Folder dialog box opens.

3 Select the folder to which the files are to be copied, and click on 'OK'.

• The selected image files begin to copy. When finished, Dimâge 2300 utility software main window will appear.

When using the TWAIN Driver:

2 Click on 'Transfer'.

• The acquire function will start. When the image is being acquired, a bar graph will show the progress of completion.
• When complete, images are acquired into the TWAIN compliant application (in this case, the MGI PhotoSuite SE), and will be displayed on the monitor.

• Further operations on the image are passed on to the MGI PhotoSuite SE. Refer to the MGI PhotoSuite SE's manual for details.
• The MGI PhotoSuite SE's manual is saved in the D:\Docs folder of the MGI PhotoSuite SE CD-ROM (on the assumption that your CD-ROM drive is drive D) as a PDF file.

DELETING IMAGES FROM THE CF CARD

Some or all of the images can be deleted from the compact flash (CF) card.

1 Click on the images to be deleted.

• The selected image(s) will be highlighted.
• To select two or more images, press and hold Ctrl (Control) key and click on the images to be deleted.
• To delete all the images, click on 'Select All' in the display.

2 Click on 'Erase Photo'.

The confirmation message will appear.

3 Click on 'Yes' to delete images. Click on 'No' to cancel the operation.

VIEWING IMAGE FILE PROPERTIES

Use the following procedure to view image file properties such as capture date, image size.

1 Click on the image you wish to view the properties.

• The selected image will be highlighted.

2 Click on 'Photo Info'.

• The properties of the selected image file will be displayed.

QUITTING THE UTILITY SOFTWARE

1 Click on 'Close' in the Dimâge 2300 utility main window.

• The utility software will quit.

QUITTING THE TWAIN DRIVER

1 Click on 'Close' in the Dimage 2300 utility main window.

• The TWAIN driver will quit and the display will return to the TWAIN compliant application (in this case, MGI PhotoSuite SE).

A Minolta Austria Ges.m.b.H Amalienstr.59-61,A-1131 Wien,Österreich Tel:[phone] Fax:[phone] http://www.minoltaeurope.com

B Minolta Belgium Branch Prins Boudewijnlaan 1 B-2550 Kontich, Belgie Tel:[phone] Fax:[phone] http://www.minolta.be en http://www.minolta.nl

CAN Minolta Canada Inc., Head Office 369 Britannia Road East, Mississauga, Ontario L4Z 2H5, Canada Tel. [phone] Fax [phone] http://www.minolta.com

CH Minolta (Schweiz) AG
Riedstr. 6, CH-8953 Dietikon, Schweiz
Tel: [phone] (sFr 2.15/min)
Fax: [phone]
http://www.minolta.ch

D Minolta GmbH Kurt-Fischer-Str. 50, D-22923 Ahrensburg, Deutschland Tel: [phone] Fax: [phone] http://www.minolta.de

DK Paul Westheimer A/S Erhvervsvej 30, DK-2610 Rødovre, Danmark Tel:[phone] Fax:[phone] http://www.minoltaeurope.com

E Videosonic S.A. c/Valportillo II,8,Pol.Ind. de Alcobendas, E-28108 Alcobendas/Madrid, Spain Tel:[phone] Fax:[phone] http://www.minoltaeurope.com

F Minolta France S.A. 365, Route de Saint-Germain, F-78420 Carrières-Sur-Seine, France Tel: [phone] Fax: [phone] http://www.minolta.fr

FIN Minolta Finland Branch Niittykatu 6,PL 37 SF-02201 Espoo,Finland Tel:[phone] Fax:[phone] http://www.minolta.fi

GB Minolta (UK) LTD. Photographic Division
Precedent Drive,
Rooksley, Milton Keynes, MK13 8HF,
England
Tel: [phone]
Fax: [phone]
http://www.minoltaeurope.com

IRL Photopak Sales 241 Western Industrial Estate, Naas Road, Dublin 12, Ireland Tel: [phone] Fax: [phone] http://www.minoltaeurope.com

I Rossi & C. S.p.A. Via Ticino 40, I - 50019 Osmannoro Sesto Fiorentino (Fi), Italy Tel.: [phone] Fax: [phone] http://www.minoltafoto.it

N Scandiafilm AS Enebakkveien 304, N-1188 Oslo 11, Norge Tel: [phone] Fax: [phone] http://www.minoltaeurope.com

NL Minolta Camera Benelux B.V. Zonnebaan 39, Postbus 6000 3600 HA Maarssen, Nederland Tel: [phone] Fax: [phone] http://www.minolta.nl

P Minolta Portugal Lda Av. do Brasil 33-a, P-1700 Lisboa, Portugal Tel: [phone] Fax: [phone] http://www.minoltaeurope.com

S Minolta Svenska AB P.O.Box 9058,Albygatan 114,S-17109 Solna, Sverige Tel:[phone] Fax:[phone] http://www.minoltaeurope.com

Sin Minolta Singapore (Pte) Limited
10 Teban Gardens Crescent, Singapore
2260
Tel: [phone]
Fax: [phone]
http://www.minolta.com