4.5XL - Haut-parleur Hartke - Notice d'utilisation et mode d'emploi gratuit
Retrouvez gratuitement la notice de l'appareil 4.5XL Hartke au format PDF.
| Type de produit | Haut-parleur |
| Marque | Hartke |
| Modèle | 4.5XL |
| Diamètre du haut-parleur | 4,5 pouces (114 mm) |
| Impédance nominale | 8 ohms |
| Puissance admissible (RMS) | 50 W |
| Puissance de crête | 100 W |
| Réponse en fréquence | 80 Hz - 20 kHz |
| Sensibilité | 90 dB SPL (1W/1m) |
| Dimensions (L × H × P) | 120 × 120 × 80 mm |
| Poids | 0,9 kg |
| Matériau du cône | Papier traité |
| Matériau de la suspension | Caoutchouc |
| Type d'aimant | Ferrite |
| Connectique | Bornes à vis |
| Utilisation recommandée | Enceinte de monitoring, guitare basse, sonorisation |
| Entretien et nettoyage | Nettoyer avec un chiffon sec et doux. Éviter les solvants. |
| Sécurité | Ne pas exposer à l'humidité ni aux chocs violents. |
| Pièces détachées et réparabilité | Contactez le service après-vente Hartke pour les pièces. |
| Informations générales | Haut-parleur large bande conçu pour une reproduction sonore claire. |
FOIRE AUX QUESTIONS - 4.5XL Hartke
Questions des utilisateurs sur 4.5XL Hartke
0 question sur cet appareil. Repondez a celles que vous connaissez ou posez la votre.
Poser une nouvelle question sur cet appareil
Téléchargez la notice de votre Haut-parleur au format PDF gratuitement ! Retrouvez votre notice 4.5XL - Hartke et reprennez votre appareil électronique en main. Sur cette page sont publiés tous les documents nécessaires à l'utilisation de votre appareil 4.5XL de la marque Hartke.
MODE D'EMPLOI 4.5XL Hartke
4.5XL
4 x10" Plus 5" Stackable Aluminum Drive Bass Enclosure
Owners Manual
Hartke
4.5XL Introduction and Features
Congratulations on purchasing the 4.5XL bass enclosure by Hartke! The XL Series enclosures have been designed to provide excellent tone with a fast attack, deep low-end and punchy output. The 4.5XL features four 10", proprietary low frequency drivers with specially designed aluminum cones, large voice coils on Kapton formers, impregnated fabric surrounds, and matched convex dust covers all mounted in a heavy-duty steel frames. Rounding out the tone is a proprietary 5" aluminum mid-range driver. Using heavy-duty plywood construction, covered in rugged carpet with recessed jack plate and ergonomic metal handles, the 4.5XL will provide reliable performance from gig to gig and venue to venue.
In these pages, you'll find a detailed description of the features of the 4.5XL, as well as a description of its front and rear panels, step-by-step instructions for its setup and use and full specifications. You'll also find a warranty card enclosed—please don't forget to fill it out and mail it in so that you can receive online technical support and so we can send you updated information about these and other Samson products in the future.
We recommend you record your serial number in the space provided below for future reference.
Serial number:
Date of purchase:
Should your unit ever require servicing, a Return Authorization number (RA) must be obtained before shipping your unit to Samson. Without this number, the unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-6766) for a Return Authorization number prior to shipping your unit. Please retain the original packing materials and if possible, return the unit in the original carton and packing materials.
4.5XLFeatures
• 4 x 10 Inch heavy-duty, Aluminum
Low Frequency drivers
• 3/4" Plywood construction
• T uned Front Shelf Port
• Perforated metal speaker grill
- Recessed metal handles
- Stacking corners
- Dual, parallel wired 1/4" jacks
- Covered in durable carpet
Connecting the 4.5XL
About Impedance
Before you hook up your speaker cabinet, be sure that you understand a little about impedance. Impedance is the electronic load that the speaker puts on the power amplifier and is measured in Ohms.
Here is the tricky, yet simple rule of impedance: When two speakers, of equal impedance are wired in "Parallel", the total impedance is cut in half and when two speakers are wired in "Series", the total impedance is the sum of the speakers individual impedance.
The 4.5XL impedance is 8 Ohms. So, when two 4.5XL's are connected together in parallel, the total impedance is 4 Ohms. The impedance of your speaker also has an effect on your amplifier. In general, the lower the impedance, the more power your amplifier will put out.
IMPORTANT: There is a minimum safe impedance so be sure to check the manufacturer's recommended impedance for your amplifier to avoid any damage to your amplifier or voiding your warranty.
Connecting the 4.5XL to Your Amplifier The 4.5XL connections are made via 1/4" phone jacks located on the rear panel jack-plate. Be sure to make your connection with un-shielded speaker cable. Connect the Amplifier Output to the speaker Input on the 4.5XL's rear jackplate.
Using the EXTENSION Output
The 4.5XL provides a convenient Extension Output for connecting additional speaker cabinets in parallel. Be sure to read the section above on impedance to insure a proper hook up with your amplifier. Follow the steps below to connect two 4.5XL's using the Extension Output. Connect the Amplifier Output to the Input of the first 4.5XL. Now, connect the Extension Output to the Input of the second 4.5XL.
Specifications
Hartke 4.5XL Specifications
Type Tuned, Vented Enclosure
Impedance (Ohms) 8 Ohms Impedance
Power Handling 400 Watts RMS Power Handling
Drivers 1 5XL8 Special Design
Aluminum 5" drive unit and 4
10XL8 Special Design Aluminum
10", 8 ohm, 100 watt drive units
SPL 99dB @ 1W/1M
Frequency Response 30Hz - 12kHz
Inputs Parallel 1/4"
Weight 99 lbs. (44.91 kg)
Dimensions Height:26.5" (67.31 cm)
Width: 24" (60.96 cm)
Depth: 18" (45.72 cm)
Hartke
Distributed Worldwide Exclusively by:
Samson Technologies Corp.
575 Underhill Blvd.
P.O. Box 9031
Syosset, NY 11791-9031
Phone: 1-800-3-SAMSON (1-800-372-6766)
Fax: 516-364-3888
www.samsontech.com
Marque : Hartke
Modèle : 4.5XL
Catégorie : Haut-parleur