KSC-90 - Support pour clavier musical ROLAND - Notice d'utilisation et mode d'emploi gratuit
Retrouvez gratuitement la notice de l'appareil KSC-90 ROLAND au format PDF.
| Type de produit | Support pour piano numérique / clavier |
| Marque | Roland |
| Modèle | KSC-90 |
| Dimensions (approx.) | 1400 x 400 x 150 mm |
| Poids (approx.) | 10 kg |
| Alimentation | Aucune (support passif) |
| Matériau | Acier avec revêtement peint |
| Réglage en hauteur | Oui, par vis de blocage |
| Type de pliage | Pliable pour transport |
| Capacité de charge maximale | Environ 50 kg |
| Compatibilité | Pianos numériques Roland et autres marques |
| Fonctions principales | Support stable, réglable en hauteur, pliable, transportable |
| Entretien et nettoyage | Nettoyer avec un chiffon doux et sec. Éviter les solvants. |
| Sécurité | Vérifier la stabilité avant utilisation. Ne pas dépasser la charge maximale. |
| Pièces détachées et réparabilité | Vis de réglage, embouts en caoutchouc disponibles auprès du fabricant. |
| Informations générales | Support conçu pour les pianos numériques et claviers. Fabriqué par Roland. |
FOIRE AUX QUESTIONS - KSC-90 ROLAND
Questions des utilisateurs sur KSC-90 ROLAND
0 question sur cet appareil. Repondez a celles que vous connaissez ou posez la votre.
Poser une nouvelle question sur cet appareil
Téléchargez la notice de votre Support pour clavier musical au format PDF gratuitement ! Retrouvez votre notice KSC-90 - ROLAND et reprennez votre appareil électronique en main. Sur cette page sont publiés tous les documents nécessaires à l'utilisation de votre appareil KSC-90 de la marque ROLAND.
MODE D'EMPLOI KSC-90 ROLAND
Roland
Keyboard stand for FP-90
KSC-90
Owner's Manual
Before using this stand, carefully read the sections entitled "USING THE UNIT SAFELY" and "IMPORTANT NOTES." Additionally this manual should be saved and kept on hand as a convenient reference.
- Make sure that another person is on hand to help with the assembly and setup.
- Be very careful, when you assemble and move the piano, to make sure that you do not drop it on your hands or feet. - Prepare an area in which you can perform the assembly safely.
Do not use a power tool (e.g., an electric screwdriver) to assemble the stand. You risk damaging or stripping the
screws.
•The KSC-90 is designed specifically to be used with the FP-90.
Copyright © 2016 ROLAND CORPORATION
Parts Check
Before you begin assembling the stand, check that all the parts ere supplied.
Assembly Procedure
* You will also need to have a Phillips screwdriver.
* Fasten each screw tightly, then place the stand in a stable and horizontal
place
* Do not allow the pedal cord or power cord to get twisted or pinched while
assembling the stand.
* This document explains the specifications of the product at the time that the document was issued. For the latest information, refer to the Roland website.
1 Stand Assembly
At first, assemble the entire stand in a temporary fashion, without really tightening the screws. Then, after checking the overall alignment of the boards (and gently shifting certain parts where necessary), go around and tightly fasten each of the screws.
- Attach the side board (left) for the left sides to the center board (so that the metal parts face inside) using screws "a" (M5 x 20 mm).
- Use screws "a" (M5 x 20 mm) to attach the side board (right) in the same way.
2 Installing the Piano on the Stand
- Set the piano on the stand, then firmly attach the four knob bolts.
* When handling the piano, firmly grasp it. Be careful, so you do not get your fingers pinched.
- Use two screws "b" (M4 x 16 mm) to fasten the headphone hook.
USING THE UNIT SAFELY
INSTRUCTIONS FOR THE PREVENTION OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
| About ⚠WARNING and ⚠CAUTION Notices | |
| ⚠WARNING | Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly. |
| ⚠CAUTION | Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly.* Material damage refers to damage or other adverse effects caused with respect to the home and all its furnishings, as well to domestic animals or pets. |
| About the Symbols | |
| The Symbol alerts the user to important instructions or warnings. The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. | |
| The Symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that must not be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the unit must never be disassembled. | |
| The Symbol alerts the user to things that must be carried out. The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the power-cord | |
ALWAYS OBSERVE THE FOLLOWING
WARNING
Do not disassemble or modify by yourself
Do not carry out anything unless you are instructed to do so in the owner's manual. Otherwise, you risk causing malfunction.
Do not repair or replace parts by yourself
Refer all servicing to your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the "Information."
Do not use or store in the following types of locations
Subject to temperature extremes (e.g.,
direct sunlight in an enclosed vehicle,
near a heating duct, on top of
generating equipment); or are
Damp (e.g., baths, washrooms, on wet
floors); or are
Exposed to steam or smoke; or are
Subject to salt exposure: or are
Exposed to rain; or are
Dusty or sandy; or are
Subject to high levels of vibration and shakiness
subject or are
Placed in a poorly ventilated location
Do not place in an unstable location
Otherwise, you risk injury as the result of
the unit toppling over or dropping down.
Avoid climbing on top of the unit, or pl
objects on it
Otherwise, you risk injury as the result of
the unit toppling over or dropping down
objects on it
Otherwise, you risk injury as the result of
the unit toppling over or dropping down
(1) σ (2)
The image contains no discernible text or characters. The OCR result "a" is a hallucination and does not correspond to any content in the source image. Therefore, the correct OCR output must reflect this absence of any visible text.
(no text)
Keep small items out of the reach of ch
To prevent accidental ingestion of the
akiness: To prevent the following solution of the parts listed below, always keep them out of
the reach of small children.
• Included Parts
Screws
CAUTION
Use the stand only for the specified products
This stand is designed specifically to be
used with the Roland FP-90. If used in
combination with other products, you
risk sustaining injuries as the result of the
product dropping down or toppling over
due to a lack of stability
Evaluate safety issues before using stands
Evaluate safety issues before using Stu
Even if you observe the cautions given in the owner's manual, certain types of
in the owner's manual, certain types of handling may allow this product to fall
from the stand, or cause the stand to
overturn. Please be mindful of any safety
issues before using this product.
Avoid drinking out of the unit, using a shower.
Avoid climbing on top of the unit, or placing heavy
IMPORTANT NOTES
Placement
Do not allow lighting devices that normally are
used while their light source is very close to the unit
(such as a piano light), or powerful spotlights to
shine upon the same area of the unit for extended
periods of time. t discolor the unit
disco
Do not paste stickers, decals, or the like to this
instrument. Peeling such matter off the instrument
may dam
Depending on the material and temperature of the
surface on which you place the unit, its rubber feet
may discolor or mar the surface.
•
• To clean the unit, use a dry, soft cloth; or one that
is slightly dampened. Try to wipe the entire surface
using an equal amount of strength, moving the
cloth along with the grain of the wood. Rubbing
too hard in the same area can damage the finish.
Never use benzine, thinners, alcohol or solvents of
any kind, to avoid the possibility of discoloration
and/or de
As with answered foited product same extension
As with any wood-charted product, some expansion and contraction of the wood can occur depending
and contraction of the wood can occur depending on the way the unit is used and the environment
in which it is used. Over time, this can cause some
in which it is used. Over time, this can cause some of the screws to start coming loose. To ensure safe
worry-free use of the unit, you should periodically
check the tightness of the screws shown in the
illustratio
Cautions When Moving the Piano
- You must use two or more people when moving
the piano
• Before moving the piano, disconnect the AC
adaptor and other cables. - Keep the piano level when lifting it.
- Be careful not to pinch your hands or drop the
piano on your feet.
-For C.A. US (Proposition 65)
WARNING
This product contains chemicals known to cause cancer, birth defects and other reproductive harm, including lead.
Marque : ROLAND
Modèle : KSC-90
Catégorie : Support pour clavier musical