PAC-106 Classic - Caméra de surveillance Profile - Notice d'utilisation et mode d'emploi gratuit

Type de produit	Caméra de surveillance
Marque	Profile
Modèle	PAC-106 Classic
Dimensions (L x l x H)	Environ 70 x 60 x 120 mm
Poids	Environ 300 g
Alimentation	Adaptateur secteur 12 V CC (inclus)
Consommation électrique	5 W (max)
Résolution vidéo	1920 x 1080 pixels (Full HD)
Angle de vue	90° (diagonale)
Vision nocturne	Oui, jusqu'à 10 mètres (LED infrarouge)
Détection de mouvement	Oui, avec notification push
Stockage	Carte microSD jusqu'à 128 Go (non incluse)
Connectivité	Ethernet RJ45, Wi-Fi 802.11 b/g/n
Protocole	ONVIF, HTTP, RTSP
Audio	Microphone intégré et haut-parleur (audio bidirectionnel)
Indice de protection	IP65 (résistant aux intempéries)
Température de fonctionnement	-10 °C à +50 °C
Entretien et nettoyage	Nettoyer le boîtier avec un chiffon doux et sec. Ne pas utiliser de produits abrasifs.
Sécurité	Protection par mot de passe administrateur, cryptage HTTPS
Pièces détachées et réparabilité	Câble d'alimentation, support de montage, vis. Consultez le service après-vente Profile pour les réparations.

FOIRE AUX QUESTIONS - PAC-106 Classic Profile

Comment réinitialiser la caméra PAC-106 Classic aux paramètres d'usine ?

Maintenez enfoncé le bouton RESET situé à l'arrière de la caméra pendant environ 10 secondes jusqu'à ce que le voyant clignote. La caméra redémarrera avec les paramètres par défaut.

Comment connecter la caméra à mon réseau Wi-Fi ?

Téléchargez l'application Profile View, créez un compte, puis suivez les instructions pour ajouter un appareil. Assurez-vous que la caméra est en mode appairage (voyant clignotant rapidement).

La vision nocturne ne fonctionne pas, que faire ?

Vérifiez que les LED infrarouges ne sont pas obstruées. Dans l'application, assurez-vous que le mode nuit est activé. Si le problème persiste, réinitialisez la caméra.

Quel type de carte microSD est compatible ?

La caméra accepte les cartes microSD de classe 10 ou supérieure, jusqu'à 128 Go. Formatez la carte en FAT32 avant utilisation.

Puis-je visualiser la caméra à distance depuis mon téléphone ?

Oui, via l'application Profile View disponible sur iOS et Android. Connectez-vous avec votre compte et sélectionnez votre caméra.

Comment activer la détection de mouvement ?

Dans l'application, accédez aux paramètres de la caméra, puis à 'Détection de mouvement'. Activez-la et définissez les zones de détection. Vous recevrez des notifications sur votre téléphone.

Que faire si la caméra ne s'allume pas ?

Vérifiez que l'adaptateur secteur est correctement branché. Essayez une autre prise électrique. Si le voyant ne s'allume pas, contactez le service après-vente.

Est-il possible d'enregistrer en continu ?

Oui, avec une carte microSD, vous pouvez configurer l'enregistrement continu ou programmé dans les paramètres de l'application.

La caméra est-elle étanche ?

Oui, elle possède un indice de protection IP65, ce qui la protège contre les projections d'eau et la poussière. Elle peut être installée en extérieur sous abri.

Comment changer le mot de passe de la caméra ?

Dans l'application, allez dans 'Paramètres' > 'Compte' > 'Mot de passe'. Saisissez l'ancien mot de passe puis le nouveau. Confirmez la modification.

MODE D'EMPLOI PAC-106 Classic Profile

We thank you for the purchase of this Profile product. Note: It is important that you read this manual carefully before using the product Then keep this manual in a safe place.

Technical data Monitor

■ Supply voltage adapter: 230VAC/15VDC 1.5A
■ Working current: +/- 300 mA
- Operating temperature: -10°C to 60°C
■ Max relative humidity: 85%
■ Number of pixels: 480 horizontal X 240 vertical
■ Screen size: 2.36 Inches (diagonal)
■ Video system: PAL/NTSC
■ Total dimensions: 265(L) x 94(B) x 45(H) mm

Technical data Camera

■ Working current: <300mA
■ Temperature for use: -20^ircC/+50^ircC
■ Type:pinhole camera
■ Focus/image angle: 50°
■ Total dimensions:120(L)x41(W)x45(H)mm

Technical requirements for connections

• Use either the 10-metre cable supplied or wiring measuring 0.6 - 0.8 mm² with a max. length of 30 metres.
• You need a plug socket that is max. 1.5 m from the monitor.
• Required wires without door lock: 4
• Required wires with door lock: 6

Parts

■ Monitor with receiver
- Camera
■ Protective cover for external unit
■ Mounting bracket for monitor
- Spacer bushes for camera
- Fixing screws
■ Connecting cable 10 m

Safety instructions

• The monitor and camera may never be cleaned with detergents. Only use soap and a damp cloth.
• The adapter's power wiring may never be cut through nor extended; this renders the guarantee invalid!
• The monitor may not be placed close to magnetic fields such as next to a TV or thick power cables.
  ■ Water may never be poured over the camera or monitor. The outside camera is only splashproof.

Assembly instructions

1. If there is not yet any wiring:
2. The position of the monitor is determined as follows: the height is approximately 165 cm, and is max. 150 cm from the plug socket into which the adapter will be plugged. The connecting cable between monitor and camera must therefore come from the wall behind the monitor. Tubing must be

provided to contain the cable so the cable can move freely. If possible also provide tubing with a sufficiently large diameter, 20-25mm.

• Determine the position of the camera outside at the door. The ideal installation height is 155 to 165 cm. Then smaller and larger persons remain in picture.
• Bring the camera cable to the monitor from outside to inside; the cable is moulded.
• Connect the wiring according to diagram below. We again emphasise that the power supply wiring may not be extended or cut through: this causes the appliance to work poorly and invalidates the guarantee.

graph LR
    A["CAMERA"] --> B["yellow (video)"]
    A --> C["black"]
    A --> D["red"]
    A --> E["white (audio)"]
    B --> F["1"]
    C --> G["2"]
    D --> H["3"]
    E --> I["4"]
    J["DOOR LOCK"] --> K["5"]
    J --> L["6"]

• Cut off the cables with 2 cores without door lock.

• If a door lock is to be connected, its connection must be from the outside camera as shown on the diagram below. The lock may consume no more than 300 mA and must have a memory function (the lock remains in position “free” until just before the door is pushed open). The 2 wires are already provided in a moulded cable (4m)

• if there is already existing wiring (max.30m):

• The wire diameter must be between 0,6 and 0,8 mm ² .

• Shorten the moulded cables to the desired length and strip the wires approximately 1cm. If an electrical door lock is used: also strip the 2-core cable over a length of 1cm.
• The door lock is connected from the camera with the moulded cable with two wires.
• The lock may consume no more than 300 mA and must have a memory function (the lock remains in a free position as long as the door is not pushed open).
• If a recess can be provided behind the camera in the wall or door frame, connect the wiring through the connecting blocks and work it away in the recess. If you cannot do this the wires must be twisted together and insulated with insulation tape.

Use:

A. Having a normal conversation

1. Ringing on the external unit
2. The image automatically appears on the monitor inside.
3. Take the receiver and speak to the visitor.
4. The door lock can be operated with the key for that purpose.
5. Replace the receiver after the conversation.

B. Making a visual check

1. You can press the picture key without picking up the receiver.
2. The picture appears without any noise being heard outside.
3. You can pick up the receiver and have a conversation if you wish.
4. If you do not have a conversation you can stop the picture by pressing the picture button again. If you do have a conversation just replace the receiver after the conversation.

C. Changing functions

1. The luminosity can be changed using the luminosity key; the light intensity increases by a value of 1 each time the button is pressed. There are 7 levels. After the last level one returns to the first or lowest position.
2. The contrast can be changed with the contrast button. This happens in the reverse direction, from less to more contrast. Here also there are 7 levels.
3. The colour intensity is changed with the colour key. There are 7 different colour intensities changed by pressing the button once.
4. The volume can be adjusted using the slider button. The volume is continuously adaptable.

Guarantee conditions

The guarantee period for the PAC-106 amounts to 2 years and commences on the date of purchase. During this guarantee period Eltra nv will repair any defects attributable to material or production faults. Eltra nv may choose to either repair or replace a defective appliance.

Eltra nv is not obliged to repair or replace appliances if they have become defective as a result of damage, inappropriate use, or modifications or adaptations made after the purchase date.

Take any defective appliance together with the original receipt back to the shop where the appliance was sold. Always add a note with a description of the problem.

Damage

Eltra nv can under no circumstances whatsoever be held responsible for damage of whatever nature if the appliance was not correctly installed according to the specified installation instructions, nor for damage as a result of unforeseen circumstances such as natural disasters, lightening strike, etc. All such resulting costs are consequently at the expense of the buyer and are not covered by the guarantee conditions.

www.profile.eu Eltra nv, Pachtgoedstraat 2, 9140 Temse, BELGIUM Eltra DIYeuronet, Frontstraat 14, 5405 AM Uden, THE NETHERLANDS