EN-FR6021 - Haut-parleur Fusion - Notice d'utilisation et mode d'emploi gratuit
Retrouvez gratuitement la notice de l'appareil EN-FR6021 Fusion au format PDF.
| Type de produit | Haut-parleur coaxial 2 voies |
| Marque | Fusion |
| Modèle | EN-FR6021 |
| Diamètre du haut-parleur | 165 mm (6.5 pouces) |
| Puissance maximale (RMS) | 75 W RMS, 150 W crête |
| Impédance | 4 ohms |
| Réponse en fréquence | 45 Hz - 20 kHz |
| Sensibilité | 87 dB (1W/1m) |
| Matériau de la membrane | Polypropylène traité UV |
| Matériau du tweeter | Soie traitée |
| Aimant | Ferrite |
| Poids unitaire | 0.6 kg |
| Diamètre de découpe | 147 mm |
| Profondeur de montage | 70 mm |
| Alimentation | Passive, nécessite amplificateur externe |
| Fonctions principales | Reproduction sonore haute fidélité, usage marin |
| Indice de protection | Résistant à l'eau et aux UV |
| Entretien | Nettoyage avec chiffon humide, séchage immédiat |
| Sécurité | Ne pas court-circuiter, respecter la polarité |
| Pièces détachées | Grille de protection, câbles, vis de montage |
| Réparabilité | Réparation par centre agréé recommandée |
| Informations générales | Convient pour bateaux, véhicules récréatifs, voitures |
FOIRE AUX QUESTIONS - EN-FR6021 Fusion
Questions des utilisateurs sur EN-FR6021 Fusion
0 question sur cet appareil. Repondez a celles que vous connaissez ou posez la votre.
Poser une nouvelle question sur cet appareil
Téléchargez la notice de votre Haut-parleur au format PDF gratuitement ! Retrouvez votre notice EN-FR6021 - Fusion et reprennez votre appareil électronique en main. Sur cette page sont publiés tous les documents nécessaires à l'utilisation de votre appareil EN-FR6021 de la marque Fusion.
MODE D'EMPLOI EN-FR6021 Fusion

FUSON®
ENCOUNTER FULL RANGE SPEAKERS
SPECIFICATIONS
| EN-FR6021 | EN-FR6421 | EN-FR5221 | |
| Peak Power (Watts): | 160 | 170 | 190 |
| Rated Power (Watts): | 30 | 30 | 35 |
| Frequency Response: | 44Hz - 24kHz | 43Hz - 24kHz | 41Hz - 24kHz |
| Impedance: | 4 Ohm | 4 Ohm | 4 Ohm |
| Sensitivity: | 83 dB | 83 dB | 85 dB |
| Cone Material: | Polypropylene | Polypropylene | Polypropylene |
| Tweeter: | PEI | PEI | PEI |
| Mounting Depth: | 47mm (1-7/8") | 50mm (2") | 46mm (1-3/4") |
| Mounting Diameter: | 103mm (4-1/16") | 142mm (5-9/16") x90mm (3-9/16") | 118mm (4-5/8") |
| EN-FR5721 | EN-FR6021 | EN-FR6931 | |
| Peak Power (Watts): | 200 | 210 | 310 |
| Rated Power (Watts): | 35 | 40 | 55 |
| Frequency Response: | 35Hz - 24kHz | 35Hz - 24kHz | 28Hz - 24kHz |
| Impedance: | 4 Ohm | 4 Ohm | 4 Ohm |
| Sensitivity: | 85 dB | 87 dB | 89 dB |
| Cone Material: | Polypropylene | Polypropylene | Polypropylene |
| Tweeter: | PEI | PEI | PEI |
| Mounting Depth: | 58mm (2-1/4") | 44mm (1-3/4") | 73mm (2-7/8") |
| Mounting Diameter: | 181mm (2-1/8") x128mm (5-1/16") | 126mm (5") | 155mm (6-1/8") x222mm (8-3/4") |
INSTALLATION GUIDELINES
Ensure the audio system is turned off before making any connections to the amplifier, speakers or source unit. Failure to do so could result in permanent damage to the audio system.
When wiring the speakers ensure that the wire is protected from sharp objects and always use rubber grommets when wiring through metal panels. Ensure all terminals and connections are protected from the vehicle chassis and from each other as failure to do so could result in permanent damage to the audio system.
When connecting the source unit and speakers ensure you connect the positive and negative output wire from the source unit to the corresponding speaker terminals. This will ensure the audio system will be in phase.
1) Ensure there is adequate clearance and depth for the speaker to be mounted.
2) Use the supplied template to mark out & cut the correct diameter hole.
3) Drill four holes for the mounting screws.
4) Separate the grille from the frame.
5) Insert the speaker and grille frame and affix with the screws provided.
6) Complete installation by replacing the grille into the grille frame.


CONTENTS OF THE BOX:
2 × ENCOUNTER FULL RANGE SPEAKERS
2 x ENCOUNTER SPEAKER GRILLES
1 x MOUNTING TEMPLAT
6 X MOON TINO
1 - WARRANTY
1 x USER MANUAL
NOTE:
Speaker wire is not included with any ENCOUNTER Full Range Speaker set, please use the existing speaker wire from your vehicle.
WARNING: Do not drill
mounting holes with speaker in place as this could allow drill shavings to damage the voice coil and void your warranty


REGISTER YOUR PRODUCT ONLINE:
For your own peace of mind, register your product purchase online at www.fusionelectronics.com. We'll keep you up to date with any news related to your product, and any new accessories to help you get the most from your product.
This product is backed by a 1 Year Limited Consumer Warranty and by registering your product you can be assured that if the unexpected occurs we'll have your details and be ready to help.
For further product and installation information, please visit www.fusionelectronics.com
Pour plus d'informations sur les produits et l'installation, rendez-vous sur www.fusionelectronics.com
Para obtener más información acerca de los productos y de su instalación, visite el sitio web www.fusionelectronics.com
Bezoek www.fusionelectronics.com voor meer product-en-installation-informatie.
Weitere Produkte und installationskreditkeiten sind in www.fusionelectronics.com
Per utilenor informazioni sul prodotti e la loro installazione, potale visibile www.fusionelectronics.com
Для получения дополнительной информации о продуктах и установке звидите, пожапужда, на www.lusionelectronics.com
WARNING: Audio Systems can produce sound levels over 135dB. Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss. Please watch for emergency vehicles as warning signals may not be heard. USE COMMON SENSE
PUBLISHED BY FUSION ELECTRONICS LIMITED. © Copyright 2013 by FUSION Electronics Limited. All rights reserved. Specifications and design are subject to change without notice. YOU CAN HELP/PROTECT THE ENVIRONMENT Please remember to respect the local regulations. Hand in the non working electrical equipment to an appropriate waste disposal order.