EGG6242NON - Plaque de cuisson AEG-ELECTROLUX - Notice d'utilisation et mode d'emploi gratuit
Retrouvez gratuitement la notice de l'appareil EGG6242NON AEG-ELECTROLUX au format PDF.
| Type de produit | Table de cuisson à gaz |
|---|---|
| Nombre de foyers | 4 foyers |
| Type de foyers | Foyers à gaz |
| Dimensions approximatives | 60 cm x 50 cm |
| Poids | 10 kg |
| Alimentation | Gaz |
| Matériau de la surface | Émail |
| Fonctions principales | Contrôle de la flamme, allumage automatique |
| Entretien et nettoyage | Nettoyage à l'eau savonneuse, pièces amovibles pour un nettoyage facile |
| Pièces détachées et réparabilité | Disponibilité de pièces de rechange, réparabilité facilitée |
| Sécurité | Système de sécurité anti-fuite de gaz, thermocouple |
| Compatibilités | Compatible avec les bouteilles de gaz et le gaz de ville |
| Garantie | 2 ans |
FOIRE AUX QUESTIONS - EGG6242NON AEG-ELECTROLUX
Questions des utilisateurs sur EGG6242NON AEG-ELECTROLUX
0 question sur cet appareil. Repondez a celles que vous connaissez ou posez la votre.
Poser une nouvelle question sur cet appareil
Téléchargez la notice de votre Plaque de cuisson au format PDF gratuitement ! Retrouvez votre notice EGG6242NON - AEG-ELECTROLUX et reprennez votre appareil électronique en main. Sur cette page sont publiés tous les documents nécessaires à l'utilisation de votre appareil EGG6242NON de la marque AEG-ELECTROLUX.
MODE D'EMPLOI EGG6242NON AEG-ELECTROLUX
EGG6242
EN HOB
USER MANUAL
CONTENTS
- SAFETY INFORMATION 3
2.SAFETYINSTRUCTIONS 4
3.PRODUCT DESCRIPTION 6
4.DAILYUSE 6 - HELPFUL HINTS AND TIPS 7
6.CARE AND CLEANING 8 - TROUBLESHOOTING 9
- INSTALLATION 11
- TECHNICAL INFORMATION 13
WE'RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You've chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you'll get great results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information: www.electrolux.com
Register your product for better service: www.electrolux.com/productregistration
Buy Accessories, Consumables and Original spare parts for your appliance: www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available. The information can be found on the rating plate. Model, PNC, Serial Numb
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
1. SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.
1.1 Children and vulnerable people safety
WARNING!
Risk of suffocation, injury or permanent disability.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are supervised by an adult or a person who is responsible for their safety.
- Do not let children play with the appliance.
- Keep all packaging away from children.
- Keep children and pets away from the appliance when it operates or when it cools down. Accessible parts are hot.
- If the appliance has a child safety device, we recommend that you activate it.
- Cleaning and user maintenance shall not be made by children without supervision.
1.2 General Safety
- The appliance and its accessible parts become hot during use. Do not touch the heating elements.
- Do not operate the appliance by means of an external timer or separate remote-control system.
-
Unattended cooking on a hob with fat or oil can be dangerous and may result in fire.
-
Never try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket.
- Do not store items on the cooking surfaces.
- Do not use a steam cleaner to clean the appliance.
- Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
2. SAFETY INSTRUCTIONS
This appliance is suitable for the following markets: IT
2.1 Installation
WARNING!
Only a qualified person must install this appliance.
- Remove all the packaging.
- Do not install or use a damaged appliance.
- Obey the installation instruction supplied with the appliance.
- Keep the minimum distance from the other appliances and units.
Always be careful when you move the appliance because it is heavy. Always wear safety gloves. - Seal the cut surfaces with a sealant to prevent moisture to cause swelling.
- Protect the bottom of the appliance from steam and moisture.
- Do not install the appliance adjacent to a door or under a window. This prevents hot cookware to fall from the appliance when the door or the window is opened.
- If the appliance is installed above drawers make sure that the space, between the bottom of the appliance and the upper drawer, is sufficient for air circulation.
- The bottom of the appliance can get hot. We recommend to install a noncombustile separation panel under the
appliance to prevent access to the bottom.
Electrical connection
WARNING!
Risk of fire and electrical shock.
- All electrical connections must be made by a qualified electrician.
- The appliance must be earthed.
- Before carrying out any operation makesure that the appliance is disconnectedfrom the power supply.
- Use the correct electricity mains cable.
- Do not let the electricity mains cable tangle.
- Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets
- Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable or plug (if applicable) can make the terminal become too hot.
- Make sure that a shock protection is installed.
- Use the strain relief clamp on cable.
- Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact the Service or an electrician to change a damaged mains cable.
- The electrical installation must have an isolation device which lets you discon
nect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.
- Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.
Gas connection
- All gas connections should be made by a qualified person.
- Make sure that there is air circulation around the appliance.
- The information about the gas supply is on the rating plate.
- This appliance is not connected to a device, which evacuates the products of combustion. Make sure to connect the appliance according to current installation regulations. Pay attention to requirements regarding adequate ventilation.
2.2 Use
WARNING!
Risk of injury, burns or electric shock.
- Use this appliance in a household environment.
- Do not change the specification of this appliance.
- Do not let the appliance stay unattended during operation.
- Do not operate the appliance with wet hands or when it has contact with water.
- Do not put cutlery or saucepan lids on the cooking zones. They become hot.
- Set the cooking zone to "off" after use.
- Do not use the appliance as a work or as a storage surface.
- When you place food into a hot oil, it may splash.
WARNING!
Risk of fire or explosion.
-
Fats and oil when heated can release flammable vapours. Keep flames or heated objects away from fats and oils when you cook with them.
-
The vapours that very hot oil releases can cause spontaneous combustion.
- Used oil, that can contain food remnants, can cause fire at a lower temperature than oil used for the first time.
- Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
WARNING!
Risk of damage to the appliance.
- Do not keep hot cookware on the control panel.
- Do not let cookware to boil dry.
- Do not activate the cooking zones with empty cookware or without cookware.
- Do not put aluminium foil on the appliance.
- Do not let acid liquids, for example vinegar, lemon juice or limescale remove touch the hob. This can cause matt patches.
- Provide good ventilation in the room where the appliance is installed.
- Make sure that the ventilation openings are not blocked.
- Use only stable cookware with the correct shape and diameter larger than the dimensions of the burners. There is a risk of overheating and rupture of the glass plate (if applicable).
- Make sure the flame does not go out when you quickly turn the knob from the maximum to the minimum position.
- Make sure pots are centrally positioned on the rings and do not stick out over edges of the cooking surface.
- Use only the accessories supplied with the appliance.
- Do not install a flame diffuser on the burner.
2.3 Care and Cleaning
WARNING!
Risk of damage to the appliance.
- Clean regularly the appliance to prevent the deterioration of the surface material.
- Do not use water spray and steam to clean the appliance.
-
Do not clean the burners in the dishwasher.
-
Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
2.4 Disposal
WARNING!
Risk of injury or suffocation.
- Contact your municipal authority for information on how to discard the appliance correctly.
- Disconnect the appliance from the mains supply.
- Cut off the mains cable and discard it.
- Flat the external gas pipes.
3.PRODUCT DESCRIPTION
3.1 Cooking surface layout
1 Cooktop
2 Semi-rapid burner
3 Rapid burner
4 Auxiliary burner
5 Control knobs
3.2 Control knobs
| Symbol | Description |
| ● | no gas supply / off position |
| ○ | ignition position / maximum gas supply |
| Symbol | Description |
| a | minimum gas supply |
4. DAILY USE
WARNING!
Refer to "Safety information" chapter.
4.1 Ignition of the burner
WARNING!
Be very careful when you use open fire in kitchen environment. Manufacturer decline any responsibility in case misuse of the flame
Always light the burner before you put cookware.
To light the burner:
- Turn the control knob counterclockwise to the maximum position ( ) and push it down.
- Keep the control knob pushed for approximately 5 seconds; this will let thermocouple to warm up. If not, the gas supply will be interrupted.
- Adjust the flame after it is regular.
If after some tries the burner does not light, check if the crown and its cap are in correct positions.
A) Burner cap
B) Burner crown
C) Ignition candle
D) Thermocouple
WARNING!
Do not keep the control knob pushed for more than 15 seconds.
If the burner does not light after 15 seconds, release the control knob, turn it into off position and try to light the burner again after minimum 1 minute.
5. HELPFUL HINTS AND TIPS
WARNING!
Refer to "Safety information" chapter.
5.1 Energy savings
- If possible, always put the lids on the pans.
In the absence of electricity you can ignite the burner without electrical device; in this case approach the burner with a flame, push the relevant knob down and turn it counter-clockwise to maximum gas release position.
If the burner accidentally goes out, turn the control knob to the off position and try to light the burner again after minimum 1 minute.
The spark generator can start automatically when you switch on the mains, after installation or a power cut. It is normal.
4.2 Turning the burner off
To put the flame out, turn the knob to the symbol .
WARNING!
Always turn the flame down or switch it off before you remove the pans from the burner.
- When the liquid starts to boil, turn down the flame to barely simmer the liquid.
WARNING!
Use cookware with diameters applicable to the size of burners.
| Burner | Diameters of cookware |
| Rapid | 180 - 260 mm |
| Front Semi-rapid | 120 - 180 mm |
| Rear Semi-rapid | 120 - 220 mm |
| Auxiliary | 80 - 180 mm |
WARNING!
Do not put the same pan on two burners.
WARNING!
Make sure pot handles do not protrude over the front edge of the cooktop and that pots are centrally positioned on the rings in order to achieve maximum stability and to obtain lower gas consumption.
Do not place unstable or deformed pots on the rings to prevent from spill and injury.
5.2 Lid (separated kit only for predisposed hobs)
- The lid protects the appliance from dust when closed and collects splashes of grease when opened. Do not use it for other functions.
- Keep the lid clean all the time.
- Make sure that the appliance is cold before you close the lid.
Glass lids can shatter when hot.
6. CARE AND CLEANING
WARNING!
Refer to "Safety information" chapter.
WARNING!
- Deactivate the appliance and let it cool down before you clean it.
- Disconnect the appliance from the electrical supply before you do cleaning or maintenance work.
Scratches or dark stains on the surface have no effect on how the appliance operates.
- You can remove the pan supports to easily clean the hob.
-
To clean the enamelled parts, cap and crown, wash them with warm soapy water and dry them carefully before you put them back.
-
Wash stainless steel parts with water, and then dry them with a soft cloth.
- The pan supports are not dishwasher proof. They must be washed by hand.
- When you wash the pan supports by hand, take care when you dry them as the enamelling process occasionally leaves rough edges. If necessary, remove stubborn stains using a paste cleaner.
- Make sure you position the pan supports correctly after cleaning.
- To make the burners work correctly, make sure that the arms of the pan supports are in the centre of the burner.
- Be very careful when you replace the pan supports to prevent the hob top from damage.
After cleaning, dry the appliance with a soft cloth.
The stainless steel can become tarnished if it is too much heated. Refer to this you must not cook with potstones, earthenware pans or cast iron plates. Do not use aluminium foil to prevent damage the top during operation.
Removing the dirt:
-
- Remove immediately: melting plastic, plastic foil, and food containing sugar.
-
Stop the appliance and let it cool down before you clean: limescale rings, water rings, fat stains, shiny metallic discolorations. Use a special cleaner applicable for surface of hob.
-
Clean the appliance with a damp cloth and some detergent.
- At the end rub the appliance dry with a clean cloth.
6.1 Cleaning of the spark plug
This feature is obtained through a ceramic ignition candle with a metal electrode. Keep these components well clean to prevent difficult lighting and check that the burner crown holes are not obstructed.
6.2 Periodic maintenance
Periodically speak your local Service Force Centre to check the conditions of the gas supply pipe and the pressure adjuster, if fitted.
7. TROUBLESHOOTING
| Problem | Possible cause | Remedy |
| There is no spark when lighting the gas | ·There is no electrical supply | ·Make sure that the unit is connected and the electrical supply is switched on. ·Control the fuse. If the fuse is released more than one time, refer to a qualified electrician. |
| ·Burner cap and crown are placed uneven | ·Make sure that the burner cap and crown are in correct positions. | |
| The flame is blow out immediately after ignition | ·Thermocouple is not heated sufficient | ·After lightning the flame, keep the knob pushed for approximately 5 seconds. |
| The gas ring burns un-evenly | • Burner crown is blocked with food residues | • Make sure that the in-jector is not blocked and the burner crown is clear of food particles. |
If there is a fault, first try to find a solution to the problem yourself. If you cannot find a solution to the problem yourself, speak your dealer or the local Service Force Centre.
If you operated the appliance incorrectly, or the installation was not carried out by a registered engineer, the visit from the customer service technician or dealer may not take place free of charge, even during the warranty period.
These data are necessary to help you quickly and correctly. These data are available on the supplied rating plate.
- Model description
1 Stick it on Guarantee Card and send this part
2 Stick it on Guarantee Card and keep this part
3 Stick it on instruction booklet
8. INSTALLATION
WARNING!
Refer to "Safety information" chapter.
WARNING!
The following instructions about installation, maintenance and ventilation must be carried out by qualified personnel in compliance with the regulation in force (UNI-CIG 7129 - 7131). Make sure that the kitchen is well ventilated: keep natural ventilation holes open (at least 100~cm^2 ) or install a mechanical extractor hood.
8.1 Gas Connection
Choose fixed connections or use a flexible pipe in stainless steel in compliance with the regulation in force. If you use flexible metallic pipes, be careful they do not come in touch with mobile parts or they are not squeezed. Also be careful when the hob is put together with an oven.
Make sure that the gas supply pressure of the appliance obeys the recommended values.
If the supplied pressure has not the specified value, it is necessary to assemble a proper pressure regulator in compliance with the standard UNI EN 88. For Liquid Gas (LPG) the use of pressure regulator is allowed only if they are in compliance with UNI EN 12864. The adjustable connection is fixed to the comprehensive ramp by means of a threaded nut G 1/2'' . Screw the parts without force, adjust the connection in the necessary direction and tighten everything.
A) End of shaft with nut
B) Washer
C) Elbow
Rigid connection:
Carry out connection by using metal rigid pipes (copper with mechanical end) (UNICIG 7129).
Flexible connection:
Use a flexible pipe in stainless steel (UNICIG 9891) with a maximum length 2m .
When installation is complete, make sure that the seal of each pipe fitting is correct. Use a soapy solution, not a flame!
8.2 Injectors replacement
- Remove the pan supports.
- Remove the caps and crowns of the burner.
- With a socket spanner 7 remove the injectors and replace them with the ones which are necessary for the type of gas you use (see table in "Technical Information" chapter).
- Assemble the parts, follow the same procedure backwards.
- Replace the rating plate (it is near the gas supply pipe) with the one for the new type of gas supply. You can find this plate in the package supplied with the appliance.
If the supply gas pressure is changeable or different from the necessary pressure, you must fit an applicable pressure adjuster on the gas supply pipe.
8.3 Adjustment of minimum level
To adjust the minimum level of the burners:
- Light the burner.
- Turn the knob on the minimum position.
- Remove the knob.
- With a thin screwdriver, adjust the bypass screw position.
A) The by-pass screw
- If you change from natural gas G20 20 mbar to liquid gas, fully tighten the adjustment screw in.
- If you change from liquid gas to natural gas G20 20 mbar, undo the by-pass screw approximately 1/4 of a turn.
WARNING!
Make sure the flame does not go out when you quickly turn the knob from the maximum position to the minimum position.
8.4 Electrical connection
- Ground the appliance according to safety precautions.
- Make sure that the rated voltage and type of power on the rating plate agree with the voltage and the power of the local power supply.
- This appliance is supplied with a mains cable. It has to be supply with a correct plug, able to support the load marked on the rating plate. The plug has to be fitted in a correct socket.
- Any electrical component must be installed or replaced by the Service Force Centre technician or qualified service personnel.
Always use a correctly installed shockproof socket. - Make sure that there is an access to the mains plug after installation.
- Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
-
The appliance must not be connected with an extension cable, an adapter or a multiple connection (risk of fire). Check that the ground connection is in conformity with the standard and regulations force.
-
The power cable must be placed in such a way that it does not touch any hot part.
- Connect the appliance to the mains with a device that lets to disconnect the appliance from the mains at all poles with a contact opening width of minimum 3 mm, eg. automatic line protecting cut-out, earth leakage trips or fuse. No part of the power cable must heat to a temperature of more than 90^ C.
Use clamps installed on the side of the cabinet to prevent contact with the equipment below the cooktop. See an example of an optimal path in Figure.
A) Rigid copper pipe or flexible pipe in stainless steel
8.5 Replacement of the connection cable
To replace the connection cable use only H05V2V2-F T90 or equivalent type. Make sure that the cable section is applicable to the voltage and the working temperature. The yellow/green earth wire must be approximately 2 cm longer than the brown (or black) phase wire.
8.6 Building In
A) supplied seal
B) supplied brackets
If you install the hob under a hood, please see the installation instructions of the hood for the minimum distance between the appliances.
8.7 Possibilities for insertion
Kitchen unit with door
The panel installed below the hob must be easy to remove and let an easy access
in case a technical assistance intervention is necessary.
A) Removable panel
B) Space for connections
Kitchen unit with oven
The hob recess dimensions must obey the indication and the kitchen unit must be equipped with vents to let a continuous supply of air. The electrical connection of the hob and the oven must be installed separately for safety reasons and to let easy remove oven from the unit.
9. TECHNICAL INFORMATION
Hob dimensions
| Width: | 594 mm |
| Length: | 510 mm |
Hob recess dimensions
| Width: | 560 mm |
| Length: | 480 mm |
Heat input
| Rapid burner: | 3.0 kW |
| Semi-rapid burn-er: | 2.0 kW |
| Auxiliary burner: | 1.0 kW |
| TOTAL POWER: | G20 (2H) 20 mbar = 8 kW G30 (3+) 28-30 mbar = 567 g/h G31 (3+) 37 mbar = 557 g/h |
| Electric supply: | 230 V ~ 50 Hz |
| Gas connection: | G 1/2" |
| Category: | II2H3+ |
| Gas supply: | G20 (2H) 20 mbar |
| Appliance class: | 3 |
| By-pass diameters | |
| Burner | Ø By-pass in 1/100 mm |
| Auxiliary | 28 |
| Semi-rapid | 32 |
| Rapid | 42 |
Gas burners
| BURN-ER | NOR-MAL POWER | RE-DUCED POW-ER | NORMAL POWER | ||||
| NATURAL GAS G20 (2H) 20 mbar | LPG (Butane/Propane) G31 (3+) 28-30/37 mbar | ||||||
| kW | kW | inj. 1/100 mm | m3/h | inj. 1/100 mm | G30 28-30 mbar | G31 37 mbar | |
| g/h | g/h | ||||||
| Auxiliary | 1.0 | 0.33 | 70 | 0.095 | 50 | 73 | 71 |
| Semi-rapid | 2.0 | 0.45 | 96 | 0.190 | 71 | 145 | 143 |
| Rapid | 3.0 (nat. gas) 2.8 (LPG) | 0.75 | 120x | 0.286 | 86 | 204 | 200 |
10. ENVIRONMENT CONCERNS
Recycle the materials with the symbol . Put the packaging in applicable
containers to recycle it.
Help protect the environment and human health and to recycle waste of electrical
and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
C
