| Product type | Integrated desktop computer |
| Product category | C | D |
| Manufacturer name, address | Acer Italy s.r.l., Via Lepetit, 40, 20020 Lainate (MI) Italy |
| Product model number | Aspire ZC-606 |
| Year of manufacture | 2014 |
| ETEC allowance with capability adjustments when discrete graphics cards are disabled (from 1 July 2014) | 188 kWh/year | 211 kWh/year |
| ETEC allowance with capability adjustments when discrete graphics cards are enabled (from 1 July 2014) | Not applicable | Not applicable |
| ETEC allowance with capability adjustments when discrete graphics cards are disabled (from 1 January 2016) | 134 kWh/year | 150 kWh/year |
| ETEC allowance with capability adjustments when discrete graphics cards are enabled (from 1 January 2016) | Not applicable | Not applicable |
| Whether all discrete graphics card are enabled during the test | Not applicable | Not applicable |
| Whether switchable graphics mode with UMA is driving the display during the test | Not applicable | Not applicable |
| ETEC of highest power-demanding configuration | 34.11 kWh/year | 34.38 kWh/year |
| Idle state power demand | 8.8992 Watt | 8.9628 Watt |
| Sleep mode power demand | 2.184 Watt | 2.178 Watt |
| Sleep mode with WOL enabled power demand | 2.184 Watt | 2.178 Watt |
| Off mode power demand | 0.4092 Watt | 0.42 Watt |
| Off mode with WOL enabled power | 0.4092 Watt | 0.42 Watt |
| Maximum power demand | Not applicable | Not applicable |
| Internal power supply (IPS) efficiency at 10%, 20%, 50% and 100% of rated output power | Not applicable | Not applicable |
| External power supply's (EPS) average active efficiency | 89.00% | 89.00% |
| Noise levels (the declared A-weighted sound power level, \(L_{WAd}\)) of idle mode | 3 B | 3.008 B |
| Noise levels (the declared A-weighted sound power level, \(L_{WAd}\)) of "HDD random seek" mode | 3.347 B | 3.347 B |
| Minimum number of loading cycles that the batteries can withstand | Not applicable | Not applicable |
| Configuration of memory | 2~8 GB | 2~8 GB |
| Configuration of internal storage | 1 piece | 2 pieces |
| Configuration of discrete television tuner | Not applicable | Not applicable |
| Configuration of discrete audio card | Not applicable | Not applicable |
| Configuration of discrete graphics cards | Not applicable | Not applicable |
| Configuration of discrete graphics cards category | Not applicable | Not applicable |
| The battery in this product cannot be easily replaced by users themselves | Not applicable | Not applicable |
| For products with an integrated display, the total content of mercury is | 0 mg | 0 mg |
| Measurement methodology for ETEC | COMMISSION REGULATION (EU) No 617/2013 of 26 June 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for computers and computer servers: ANNEX II Ecodesign requirements and timetable: 1.1.1. ETEC formula. |
| Measurement methodology for idle mode | EN 62623:2013 — Desktop and notebook computers — Measurement of energy consumption: 5.2. Test setup; 5.3.4. Measuring long idle mode; 5.7. True RMS watt meter specification; 5.8. True RMS watt meter accuracy; Annex E.2 (informative) ENERGY STAR® V5 compliant testing methodology. |
| Measurement methodology for sleep mode | EN 62623:2013 — Desktop and notebook computers — Measurement of energy consumption: 5.2. Test setup; 5.3.3. Measuring sleep mode; 5.4. Test conditions; 5.7. True RMS watt meter specification; 5.8. True RMS watt meter accuracy. |
| Measurement methodology for off mode | EN 62623:2013 — Desktop and notebook computers — Measurement of energy consumption:
5.2. Test setup;
5.3.2. Measuring off mode;
5.4. Test conditions;
5.7. True RMS watt meter specification;
5.8. True RMS watt meter accuracy. |
| Measurement methodology for IPS efficiency | Not applicable |
| Measurement methodology for EPS efficiency | EN 50563:2011 External a.c.—d.c. and a.c.—a.c. power supplies — Determination of no-load power and average efficiency of active modes. |
| Measurement methodology for noise level | ECMA-109 2ndedition (December 1987) Declared Noise Emission Values of Computer and Business Equipment:
4. Determination of the declared noise emission values.
ECMA-74 11thedition (December 2010) Measurement of Airborne Noise emitted by Information Technology and Telecommunications Equipment:
5. Installation and operating instructions;
6. Method for determination of sound power levels of equipment in reverberation test rooms;
7. Method for determination of sound power levels of equipment under essentially free-field conditions over a reflecting plane;
Annex C.15 Equipment category: personal computers and workstations. |
| Measurement methodology for battery loading cycles | Not applicable |
| Sequence of steps for achieving a stable condition with respect to power demand | EN 62623:2013 — Desktop and notebook computers — Measurement of energy consumption:
5.2. Test setup;
5.3.2. Measuring off mode;
5.3.3. Measuring sleep mode;
5.3.4. Measuring long idle mode. |
| Description of how sleep mode was selected or programmed | EN 62623:2013 — Desktop and notebook computers — Measurement of energy consumption:
5.2. Test setup;
5.3.3. Measuring sleep mode. |
| Description of how off mode was selected or programmed | EN 62623:2013 — Desktop and notebook computers — Measurement of energy consumption:
5.2. Test setup;
5.3.2. Measuring off mode. |
| Sequence of events required to reach the mode where the equipment automatically changes to sleep mode | ENERGY STAR® Program Requirements Product Specification for Computers, Eligibility Criteria Version 6.0, Rev. Oct-2013:
1.D.4 Sleep Mode. |
| Sequence of events required to reach the mode where the equipment automatically changes to off mode | Not applicable |
| The length of time after a period of user inactivity in which the computer automatically reaches a power mode that has a lower power demand requirement than sleep mode | 30 minutes |
| The length of time before the display sleep mode is set to activate after user inactivity | 10 minutes |
| User information on the energy-saving potential of power management functionality | http://www.energystar.gov/index.cfm?c=power.mgt.pr power.mgt_users |
| User information on how to enable the power management functionality | http://www.energystar.gov/index.cfm?c=power_mgt.pr power_mgt_users |
| Test parameter for ambient temperature | 25 °C |
| Test parameter for test voltage | 230 V |
| Test parameter for frequency | 50 Hz |
| Test parameter for total harmonic distortion of the electricity supply system | 3 % |
| Test parameter for information and documentation on the instrumentation, set-up and circuits used for electrical testing | Digital Power Meter / YOKOGAWA
WT210
PROGRAMMABLE AC SOURCE /
CHROMA 61602 |
