Question 1

How to configure the boundaries and mowing areas of the SEGWAY Navimow?

Accepted Answer

Configuring the boundaries and mowing areas of your SEGWAY Navimow is done entirely through the Navimow mobile app. Here’s how to proceed step by step:

Initial setup: Install the Navimow app from the Google Play Store (Android) or the Apple App Store (iOS). You can scan the provided QR code or search directly for "Navimow". This app is essential for setting up your mowing areas.

Boundary configuration: Access the "Mowing Areas" tab in the app. Use the interactive map to draw or adjust the areas you want the robot to mow. The Navimow uses GNSS (GPS) technology for precise navigation, meaning that no physical wire is needed. The robot will automatically understand the boundaries you have set on the map.

Configuration of no-go islands and passages: If your terrain has areas to protect (pond, flower, etc.), set them as "no-go zones". For terrains divided into several distinct lawns, create passages to allow the robot to move from one area to another.

Improving GPS accuracy: The GNSS signal is crucial for optimal operation. Install the charging station in an open space without obstacles blocking the GNSS antenna, leaving at least 2 meters of free space around the station. If your GPS signal remains weak or inaccurate, the GNSS antenna extension kit significantly improves positioning accuracy and boundary quality.

Calibration and optimization: If the robot does not return correctly to the station or struggles to adhere to the boundaries, you can recalibrate the Navimow directly via the app. Before the first use, inspect your lawn and remove any stones, branches, wires, and foreign objects that could affect the robot's navigation.

Capabilities and limits: The Navimow can handle areas up to 3,000 m² with slopes of up to 45% (24°) in the main working area and up to 10% (5.7°) at the boundaries. For optimal connection to the charging station, ensure that there are no obstacles around the station and that all connectors are clearly visible and clean.

Question 2

How to check if the battery of the SEGWAY Navimow robotic mower is charging?

Accepted Answer

To check if the battery of your SEGWAY Navimow robotic mower is charging properly, you can follow these tips:

1. Check the indicator lights

The robotic mower is usually equipped with one or more LED indicators that show the charging status. When the robot is connected to the charging station, a specific light will turn on or blink to indicate that the battery is charging.

2. Use the mobile app

If your Navimow model is connected to a mobile app, open the app and check the section dedicated to battery status. It often displays the charge level in real-time and indicates if charging is in progress.

3. Check the connection of the charging station

Make sure the charging station is properly plugged into a functional electrical outlet.
Check that the robot is correctly positioned on the station so that the charging contacts are in contact.

4. Possible sound signals

Some models emit a beep or sound at the beginning of charging. Pay attention to these signals when placing the robot on the station.

By following these steps, you will easily know if the battery of your SEGWAY Navimow robotic mower is charging.

User manual SEGWAY Robotic mower : user manuals and guides in PDF

Models SEGWAY Robotic mower most viewed

Other categories SEGWAY

Recent questions about Robotic mower SEGWAY