Why has my KitchenAid KSIB900ESS stove stopped beeping and how can I reactivate the sound?

Question

Accepted Answer

If your KitchenAid KSIB900ESS stove is no longer beeping, it is likely because you have disabled the sounds via the CLOCK/TOOLS settings. Fortunately, reactivating it is very simple and can be done in a few seconds.

Reactivate the main sound: The SOUND setting disables all beeps, including cooking end alerts and keypress beeps. To reactivate it, press the CLOCK/TOOLS button until "SOUND" appears on the screen. Then press the "1" button to toggle the setting. After that, press START or CANCEL UPPER to confirm and return to the time display. The beeps should now be reactivated.

Other sound settings to check: Your stove has four distinct sound settings. If the main sound is activated but you are not receiving the expected alerts, check the other settings: SOUND VOLUME allows you to choose between low or high volume, END TONE activates or deactivates end cycle beeps, KEYPRESS TONE controls the beeps when you press the keys, and REMINDER TONE manages the reminder beep that sounds every 1 minute after a cycle ends. Each of these settings is adjusted using the same procedure: press CLOCK/TOOLS until the desired setting is displayed, then press the "1" button to change the setting.

Important note: Even if you disable all sounds via the SOUND setting, reminder beeps remain active for safety reasons. These reminder beeps will continue to sound every 1 minute after cooking, unless you specifically disable the REMINDER TONE setting.

If after these steps the sound does not return, unplug the stove for 2 to 3 minutes to completely reset the electronics, then plug it back in. This usually resolves any temporary electronic issues affecting the sound system.

User manual KITCHENAID Cooker : user manuals and guides in PDF

Models KITCHENAID Cooker most viewed

Other categories KITCHENAID

Recent questions about Cooker KITCHENAID