How to connect the LOGICOM HOME Pluggy smart plug to the mobile app?

Question

Accepted Answer

To connect your LOGICOM HOME Pluggy smart plug to the mobile app, follow these precise steps:

1. Check the Wi-Fi connection

Make sure your smartphone is connected to your home’s 2.4 GHz Wi-Fi network, as the plug generally does not work with 5 GHz networks.

2. Download the dedicated app

Install the official LOGICOM HOME Pluggy app from the Google Play Store or the App Store.

3. Create an account or log in

Open the app and create a user account if you don’t have one, or log in with your existing credentials.

4. Prepare the plug for pairing

Plug the smart plug into an electrical outlet.
Press the button on the plug for about 5 seconds until the indicator light starts flashing rapidly, indicating that the plug is in pairing mode.

5. Add the plug in the app

In the app, select the option “Add a device” or click on the “+” symbol.
Choose the product type (smart plug) and follow the on-screen instructions.
Enter your Wi-Fi network information if prompted.

6. Finalize the connection

Wait while the app establishes the connection between your smartphone and the plug. Once the connection is successful, the indicator light on the plug will stop flashing and remain on.

Additional tips

Make sure your smartphone is close to the plug during setup.
Restart your Wi-Fi router if the plug does not connect.
Check that the plug's firmware and the app are up to date.

By following these steps, you should be able to connect your LOGICOM HOME Pluggy to the app without any issues.

User manual LOGICOM Smart plug : user manuals and guides in PDF

Models LOGICOM Smart plug most viewed

Other categories LOGICOM

Recent questions about Smart plug LOGICOM