What does the blinking green button on the LOGICOM HOME STRIPPY 4 + 4USB power strip mean?

Question

Accepted Answer

The blinking green light on your LOGICOM HOME STRIPPY 4 + 4USB power strip indicates several different states depending on the circumstances:

During the initial power-up, the power strip blinks rapidly in green. This is a sign that the product is in the configuration phase and is trying to connect to your Wi-Fi network. You can then proceed to pair it via the TuyaSmart app by entering your Wi-Fi network password.

After initialization, the blinking of the green light depends on the connection mode used. If the LED blinks rapidly, it indicates EZ-mode (standard mode). If it blinks slowly, it means the product is in AP-mode. The synchronization of the product with the app takes about 30 seconds.

In case of electrical overload, the green light blinks and then turns off in ten seconds. This means that the connected load exceeds 10.5 amperes. In this case, unplug the product immediately, check the connected devices (the current load should not exceed 10A per socket and 4A for the USB ports, with a maximum power of 2400W), and then plug it back in.

During the initial Wi-Fi connection, ensure that your Wi-Fi network is accessible and that the entered password is correct.
If the blinking persists after 30 seconds, unplug the power strip for 10 seconds and then plug it back in to restart the pairing procedure.
Check that you do not exceed the maximum allowed load (10A per socket, 4A for all USB ports).
If the problem persists, you can hold down the power button for 5 seconds to reset the power strip and restart the configuration.

A normal blink and a continuously lit LED indicate that your LOGICOM HOME STRIPPY 4 + 4USB is functioning correctly.

User manual LOGICOM Smart power strip : user manuals and guides in PDF

Models LOGICOM Smart power strip most viewed

Other categories LOGICOM

Recent questions about Smart power strip LOGICOM