How to change the bulb of the IBERNA ITLP 130S refrigerator?

Question

Accepted Answer

To change the bulb of the IBERNA ITLP 130S refrigerator, follow these simple steps:

Unplug the refrigerator: For safety reasons, always start by unplugging the appliance from the electrical outlet.
Locate the bulb: The bulb is usually located inside the refrigerator, near the top. It may be protected by a plastic cover.
Remove the cover: If a cover protects the bulb, gently remove it. Depending on the model, it may be clipped or screwed in.
Unscrew the bulb: Turn the bulb counterclockwise to unscrew it. Handle it carefully to avoid breaking it.
Install the new bulb: Choose a replacement bulb that is compatible with the specifications of the refrigerator. Screw it in clockwise until it is securely in place.
Replace the cover: Put the plastic cover back in its original position, if there was one.
Plug the refrigerator back in: Plug the appliance back in and check that the new bulb lights up correctly when the door is opened.

By following these steps, you will be able to easily replace the bulb in your IBERNA ITLP 130S refrigerator.

User manual IBERNA Refrigerator : user manuals and guides in PDF